Features DALI Power Supply • Universal AC Input Range: 90-264VAC • Suitable for DALI Installation • IEC-62386 Compliant • Cooling by free air convection • Over Current and Short Circuit Protected AC/DC Converter RELV4-16 Description DALI 5 Bus Power Supply 5Y The RELV4-16 is designed to power a DALI digital lighting control bus. This low cost AC/DC power supply is fully compliant with the IEC62386 DALI standard, so can be used with any DALI-certified product or controller. The output is current limited to 200mA, sufficient to power a complete DALI zone with up to 64 addressable DALI devices. The universal input voltage range from 90V to 264VAC enables the RELV4-16 to be used anywhere in the world. Due to its compact design with mounting tabs, it can be easily and conveniently integrated into any DALI network. An indicator LED shows Power OK and DALI bus traffic to aid installation and commissioning. The RELV4-16 comes with a 5 year warranty. wa EAR rranty Selection Guide Part Number Input Input Current Output Output Output Efficiency Voltage Range (@ 115VAC) Voltage Current Power typ. (VAC) (mA) (VDC) (mA)(W) (%) RELV4-1690-264 110 16 200 3.2 68 Specifications (measured at TA= 25°C and 230VAC) BASIC CHARACTERISTICS Parameter Condition Input Voltage Range Min. Typ. Max. 90VAC Output Voltage Range full load DC Voltage Range 264VAC 16VDC 13.6VDC Inrush Current 115VAC 230VAC DC Output Current Range 13.6VDC 18.4VDC Start-up Time 115VAC 230VAC compliant with IEC62386-101 1st Edition Rise and Fall Times Input Frequency Range 18.4VDC 21A 42A 240mA 180mA < 1s < 0.5s 10µs <100µs 50Hz Efficiency 60Hz IEC-62386 Compliant EN-55015 Certified EN-61347-1 Certified EN-61347-2-11 Certified see Selection Guide Ripple and Noise (1) Notes: Note1: 150mVp-p Ripple and Noise is measured @20MHz BW by using a 12“ twisted pair-wire terminated with 0.1µF & 47µF parallel capacitor. REGULATIONS Parameter Condition Value Output Voltage Accuracy (2) ±15% typ. Current Tolerance Notes: Note2: +20% / -10% typ. Voltage Tolerance includes line regulation, load regulation and set-up tolerance. Refer to Applications Notes www.recom-international.com REV.: 0/2015 L-1 RELV4-16 AC/DC Converter Series Specifications (measured at TA= 25°C and 230VAC) PROTECTION Parameter Condition Short Circuit Protection (SCP) Value with terminal switch (80°C typ.) Limiting Current Mode 240mA max. Limiting Current Mode Output Over Current Protection (OCP) Isolation Voltage 3.75kVAC / 1 Minute Isolation Resistance 500VDC at 25°C Isolation Grade 100MW compliant with IEC62386-101 Double Isolated for SELV Output ENVIRONMENTAL Parameter Condition Value Operating Temperature Range -20°C to +45°C Maximum Case Temperature +65°C Storage Temperature Range -40° to +80°C Storage Humidity 10% - 90% RH Operating Humidity non condensing 20% to 90% RH Vibration 10-500Hz, 2G, 60Min. along X, Y and Z MTBF MIL-HDBK-217F, at 25°C 200 x 10³ hours Derating Graph Output Power (%) 100 80 60 40 20 0 -20 -10 0 10 20 30 40 45 50 60 Ambient Temperature (°C) SAFETY AND CERTIFICATIONS Certificate Type Report / File Number CE General Safety EN-61347-1 CE Safety of AC supplied Controlgear Certificate Type (Environmental) Standard EN-61347-2-11 Conditions Standard / Criterion Electric Lighting, EMC Emissions EN-55015 FCC, Part 15 Electric Lighting, EMC Immunity EN-61000-4-2, 3, 4, 5 , 6, 8, 11 Limits for Harmonic Emissions EMC Compatability: Flicker and Voltage Variations EN-61000-3-2, Class C EN-61000-3-3 IP Rating L-2 IP20 REV.: 0/2015 www.recom-international.com RELV4-16 AC/DC Converter Series Specifications (measured at TA= 25°C, nominal input voltage, full load and after warm-up) DIMENSIONS and PHYSICAL CHARACTERISTICS Parameter Type Value Case Material plastic Dimensions (LxWxH) 112 x 42 x 24mm Package Weight 80g Mechanical Dimensions (mm) 112.0 tc 17.0 AC N AC L LED 42.0 57.0 FC 30.0 DA+ DA - Tolerance: ±0.5mm FC: fixing center FC 100.0 2 Mounting screws are included tc= Case Temperature Measuring Point 24.0 PACKAGING INFORMATION Parameter Packaging Dimension (LxWxH) Type Cardboard Box Packaging Quantity Value 256 x 124 x 84mm 10pcs The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-international.com REV.: 0/2015 L-3