SS12 - S100 Schottky Rectifier Features Description • Glass-Passivated Junctions • High-Current Capability, Low VF The SS12-S100 series includes high-efficiency, low power loss, general-propose schottky rectifiers. The clip -bonded leg structure provides high thermal performance and low electrical resistance. These rectifiers are suited for free wheeling, secondary rectification, and reverse polarity protection applications. Applications • • • • Low Voltage High-Frequency Inverters Free Wheeling Polarity Protection SMA/DO-214AC COLOR BAND DENOTES CATHODE Ordering Information Part Number Top Mark Package Packing Method SS12 SS12 DO-214AC (SMA) Tape and Reel SS13 SS13 DO-214AC (SMA) Tape and Reel SS14 SS14 DO-214AC (SMA) Tape and Reel SS15 SS15 DO-214AC (SMA) Tape and Reel SS16 SS16 DO-214AC (SMA) Tape and Reel SS18 SS18 DO-214AC (SMA) Tape and Reel SS19 SS19 DO-214AC (SMA) Tape and Reel S100 S100 DO-214AC (SMA) Tape and Reel © 2001 Fairchild Semiconductor Corporation SS12 - S100 Rev. 1.9 www.fairchildsemi.com SS12 - S100 — Schottky Rectifier January 2015 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted. Symbol Parameter Value SS12 SS13 SS14 SS15 SS16 SS18 SS19 S100 VRRM Maximum Repetitive Reverse Voltage IF(AV) Maximum Average Forward Current: 0.375-inch Lead Length at TA = 75°C 1.0 A IFSM Non-Repetitive Peak Forward Surge Current: 8.3 ms Single Half-Sine Wave 40 A TSTG Storage Temperature Range -65 to +150 °C Operating Junction Temperature -65 to +125 °C TJ 20 30 40 50 60 80 90 100 Unit V Thermal Characteristics Values are at TA = 25°C unless otherwise noted. Symbol PD RθJA Parameter Power Dissipation (1) Thermal Resistance, Junction-to-Ambient Value Unit 1.1 W 88 °C/W Note: 1. Device mounted on FE-4 PCB 0.013 mm. Electrical Characteristics Values are at TA = 25°C unless otherwise noted. Symbol Parameter VF Maximum Forward Voltage IR Maximum Reverse Current at Rated VR © 2001 Fairchild Semiconductor Corporation SS12 - S100 Rev. 1.9 Conditions Value SS12 SS13 SS14 SS15 SS16 SS18 SS19 S100 IF = 1.0 A 500 700 TA = 25°C 0.2 TA = 100°C 10 850 Unit mV mA www.fairchildsemi.com 2 SS12 - S100 — Schottky Rectifier Absolute Maximum Ratings SS12 - SS14 10 Forward Current, IF [A] Average Rectified Forward Current, IF [A] 20 1 0.75 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD P.C.B. MOUNTED ON 0.2x0.2"(5.0x5.0mm) COPPER PAD AREAS 0.5 0.25 0 0 20 40 60 80 100 Lead Temperature [ºC] 120 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 Forward Voltage, VF [V] 2 400 30 25 8.3ms Single Half-Sine-Wave JEDEC Method 20 15 10 5 0 T J = 25ºC μS Pulse Width = 300μ 1% Duty Cycle Figure 2. Foward Voltage Characteristics Total Capacitance, CT [pF] Peak Forward Surge Current, IFSM [A] Figure 1. Forward Current Derating Curve SS18 - S100 1 0.1 140 SS15 - SS16 5 1 2 5 10 20 Number of Cycles at 60Hz 50 200 T J = 25ºC 100 50 40 30 20 10 0.1 100 0.5 1 5 10 Reverse Voltage, VR [V] 50 100 Figure 4. Total Capacitance Figure 3. Non-Repetitive Surge Current 10 Forward Current, IF [A] S100 o TA= 125 C 1 o TA= 75 C o TA= 25 C 0.1 o TA= -20 C 0.01 o TA= -65 C 1E-3 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Forward Voltage, VF [V] Figure 5. Low-Current Forward Voltage Characteristics © 2001 Fairchild Semiconductor Corporation SS12 - S100 Rev. 1.9 www.fairchildsemi.com 3 SS12 - S100 — Schottky Rectifier Typical Performance Characteristics SS12 - S100 — Schottky Rectifier Physical Dimension B 5.60 4.80 B 0.13 C B A M 2.65 2.95 2.50 1.65 1.20 B B A 1.75 4.30 4.75 4.00 LAND PATTERN RECOMMENDATION 8° 0° 2.70 MAX A R0.15 4X 2.20 1.90 B C 2.05 1.95 GAUGE PLANE 0.30 0.05 0.203 0.050 0.13 C B A M 0.45 0.41 0.15 0 -8° 1.52 0.75 DETAIL A SCALE 20 : 1 NOTES: A. EXCEPT WHERE NOTED CONFORMS TO JEDEC DO214 VARIATION AC. B DOES NOT COMPLY JEDEC STD. VALUE. C. ALL DIMENSIONS ARE IN MILLIMETERS. D. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. E. DIMENSION AND TOLERANCE AS PER ASME Y14.5-1994. F. LAND PATTERN STD. DIOM5025X231M. G. DRAWING FILE NAME: DO214ACREV1 Figure 6. 2-LEAD, SMA, JEDEC DO-214, VARIATION AC © 2001 Fairchild Semiconductor Corporation SS12 - S100 Rev. 1.9 www.fairchildsemi.com 4 TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. F-PFS¥ FRFET® SM Global Power Resource GreenBridge¥ Green FPS¥ Green FPS¥ e-Series¥ Gmax¥ GTO¥ IntelliMAX¥ ISOPLANAR¥ Making Small Speakers Sound Louder and Better™ MegaBuck¥ MICROCOUPLER¥ MicroFET¥ MicroPak¥ MicroPak2¥ MillerDrive¥ MotionMax¥ MotionGrid® MTi® MTx® MVN® mWSaver® OptoHiT¥ OPTOLOGIC® AccuPower¥ AttitudeEngine™ Awinda® AX-CAP®* BitSiC¥ Build it Now¥ CorePLUS¥ CorePOWER¥ CROSSVOLT¥ CTL¥ Current Transfer Logic¥ DEUXPEED® Dual Cool™ EcoSPARK® EfficientMax¥ ESBC¥ ® ® Fairchild Fairchild Semiconductor® FACT Quiet Series¥ FACT® FAST® FastvCore¥ FETBench¥ FPS¥ OPTOPLANAR® ® PowerTrench® PowerXS™ Programmable Active Droop¥ QFET® QS¥ Quiet Series¥ RapidConfigure¥ ¥ Saving our world, 1mW/W/kW at a time™ SignalWise¥ SmartMax¥ SMART START¥ Solutions for Your Success¥ SPM® STEALTH¥ SuperFET® SuperSOT¥-3 SuperSOT¥-6 SuperSOT¥-8 SupreMOS® SyncFET¥ Sync-Lock™ ®* ® TinyBoost TinyBuck® TinyCalc¥ TinyLogic® TINYOPTO¥ TinyPower¥ TinyPWM¥ TinyWire¥ TranSiC¥ TriFault Detect¥ TRUECURRENT®* μSerDes¥ UHC® Ultra FRFET¥ UniFET¥ VCX¥ VisualMax¥ VoltagePlus¥ XS™ Xsens™ ❺™ * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. TO OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR WEBSITE AT HTTP://WWW.FAIRCHILDSEMI.COM. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in cause the failure of the life support device or system, or to affect its accordance with instructions for use provided in the labeling, can be safety or effectiveness. reasonably expected to result in a significant injury of the user. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I73 © Fairchild Semiconductor Corporation www.fairchildsemi.com