MBR1020VL
Surface Mount Schottky Power Rectifier
Features
•
•
•
•
•
•
SOD-123F
Ultra Thin Profile – Maximum Height of 1.08 mm
High Surge Capacity
UL Flammability 94V-0 Classification
MSL 1
RoHS Compliant / Green Mold Compound
Industrial Device Qualified per AEC-Q101 Standards.
* see authorized use policy
Band Indicates Cathode
1
2
Cathode
Anode
Ordering Information
Part Number
Top Mark
Package
Packing Method
MBR1020VL
RL
SOD-123F
Tape and Reel
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
Symbol
Parameter
Value
Unit
VRRM
Peak Repetitive Reverse Voltage
20
V
IF(AV)
Average Rectified Forward Current
1.0
A
IFSM
Non-Repetitive Peak Surge Current: Surge Applied at Rated
Load Conditions, Half wave, Single Phase, 60Hz
45
A
dv/dt
Voltage Rate of Change
1000
V/μs
Operating Junction Temperature Range
-55 to +125
°C
Storage Temperature Range
-55 to +125
°C
TJ
TSTG
© 2015 Fairchild Semiconductor Corporation
MBR1020VL Rev. 1.1
www.fairchildsemi.com
MBR1020VL — Surface Mount Schottky Power Rectifier
August 2015
Values are at TA = 25°C unless otherwise noted.
Symbol
Parameter
(1)
Value
Unit
RθJA
Typical Thermal Resistance, Junction-to-Ambient
200
°C/W
ψJL
Typical Thermal Characteristics, Junction-to-Lead(2)
70
°C/W
Notes:
1. Mounted with minimum recommended pad size, PC board FR4.
2. Mounted on a FR4 PCB, single-sided copper, with 10cm * 10cm copper pad area.
Electrical Characteristics
Values are at TA = 25°C unless otherwise noted.
Symbol
VF
Parameter
Instantaneous Forward Voltage(3)
IR
Instantaneous Reverse Current
at Rated DC Voltage(3)
Trr
Reverse Recovery Time
Conditions
Min.
Typ.
Max.
IF = 0.1 A
0.275
IF = 0.1 A, TA = 85°C
0.205
IF = 0.5 A
0.315
IF = 0.5 A, TA = 85°C
0.270
IF = 1.0 A
0.340
IF = 1.0 A, TA = 85°C
0.300
TA = 25°C
0.60
TA = 85°C
15
IF = 0.5 A, IR = 1 A,
Irr = 0.25 A
12.4
Unit
V
mA
ns
Note:
3. Pulse test: pulse width = 300μs, duty cycle < 2%
© 2015 Fairchild Semiconductor Corporation
MBR1020VL Rev. 1.1
www.fairchildsemi.com
2
MBR1020VL — Surface Mount Schottky Power Rectifier
Thermal Characteristics
Figure 2. Maximum Foward Voltage
Figure 1. Typical Forward Voltage
100mA
100mA
10mA
10mA
1mA
1mA
100 m A
100 m A
10 m A
10 m A
Figure 3. Typical Reverse Current
Figure 4. Maximum Reverse Current
Figure 5. Capacitance
© 2015 Fairchild Semiconductor Corporation
MBR1020VL Rev. 1.1
www.fairchildsemi.com
3
MBR1020VL — Surface Mount Schottky Power Rectifier
Typical Performance Characteristics
/$1'3$77(515(&200(1'$7,21
$
$
127(6
$7+,63$&.$*('2(6127&21)25072
$1<67$1'$5'6
%$//',0(16,216$5(,10,//,0(7(56
&',0(16,216$5((;&/86,9(2)%8556
02/')/$6+$1'7,(%$53527586,216
''5$:,1*),/(1$0(0$%5(9
Figure 6. 2-LEAD, SOD123F, NON-JEDEC, FLAT TERMINAL
© 2015 Fairchild Semiconductor Corporation
MBR1020VL Rev. 1.1
www.fairchildsemi.com
4
MBR1020VL — Surface Mount Schottky Power Rectifier
Physical Dimensions
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
F-PFS¥
FRFET®
SM
Global Power Resource
GreenBridge¥
Green FPS¥
Green FPS¥ e-Series¥
Gmax¥
GTO¥
IntelliMAX¥
ISOPLANAR¥
Making Small Speakers Sound Louder
and Better™
MegaBuck¥
MICROCOUPLER¥
MicroFET¥
MicroPak¥
MicroPak2¥
MillerDrive¥
MotionMax¥
MotionGrid®
MTi®
MTx®
MVN®
mWSaver®
OptoHiT¥
OPTOLOGIC®
AccuPower¥
AttitudeEngine™
Awinda®
AX-CAP®*
BitSiC¥
Build it Now¥
CorePLUS¥
CorePOWER¥
CROSSVOLT¥
CTL¥
Current Transfer Logic¥
DEUXPEED®
Dual Cool™
EcoSPARK®
EfficientMax¥
ESBC¥
®
®
Fairchild
Fairchild Semiconductor®
FACT Quiet Series¥
FACT®
FastvCore¥
FETBench¥
FPS¥
OPTOPLANAR®
®
Power Supply WebDesigner¥
PowerTrench®
PowerXS™
Programmable Active Droop¥
QFET®
QS¥
Quiet Series¥
RapidConfigure¥
¥
Saving our world, 1mW/W/kW at a time™
SignalWise¥
SmartMax¥
SMART START¥
Solutions for Your Success¥
SPM®
STEALTH¥
SuperFET®
SuperSOT¥-3
SuperSOT¥-6
SuperSOT¥-8
SupreMOS®
SyncFET¥
Sync-Lock™
®*
®
TinyBoost
TinyBuck®
TinyCalc¥
TinyLogic®
TINYOPTO¥
TinyPower¥
TinyPWM¥
TinyWire¥
TranSiC¥
TriFault Detect¥
TRUECURRENT®*
μSerDes¥
UHC®
Ultra FRFET¥
UniFET¥
VCX¥
VisualMax¥
VoltagePlus¥
XS™
Xsens™
❺™
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. TO OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR
WEBSITE AT HTTP://WWW.FAIRCHILDSEMI.COM. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF
ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF
OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE
WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
AUTHORIZED USE
Unless otherwise specified in this data sheet, this product is a standard commercial product and is not intended for use in applications that require extraordinary
levels of quality and reliability. This product may not be used in the following applications, unless specifically approved in writing by a Fairchild officer: (1) automotive
or other transportation, (2) military/aerospace, (3) any safety critical application – including life critical medical equipment – where the failure of the Fairchild product
reasonably would be expected to result in personal injury, death or property damage. Customer’s use of this product is subject to agreement of this Authorized Use
policy. In the event of an unauthorized use of Fairchild’s product, Fairchild accepts no liability in the event of product failure. In other respects, this product shall be
subject to Fairchild’s Worldwide Terms and Conditions of Sale, unless a separate agreement has been signed by both Parties.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Terms of Use
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed
applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors
are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical
and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise.
Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Advance Information
Formative / In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
Definition
Datasheet contains the design specifications for product development. Specifications may change
in any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I76
© Fairchild Semiconductor Corporation
www.fairchildsemi.com