Redundancy Modules TSP-REM Series, 90–360 Watt Features ◆ Module for true current sharing operation ◆ Alarm outputs, redundancy OK signal ◆ Hot swappable inputs ◆ Remote On/Off ◆ International safety approval package ◆ 3-year product warranty UL 508 UL 60079-15 CB CB Scheme Scheme EMC LVD IEC 60950-1 UL 508 UL 60079-15 ATEX II3G With this module and two power supplies of the TSP series (of same type) a highly reliable, redundant power system can be configured without any additional components. This module enforces the equivalent sharing of the output current of the power supplies. In the event of a failed or disconnected power supply, the second unit will automatically supply the full current to the load. The redundancy of the system is monitored and, indicated by an alarm output. The inputs are hot swappable. Models Order Code Input TSP–REM360* 2 x 24 VDC 2 x Control input TSP–REM600* Max Power per Input Output Voltage adjust. Output Current max.** Output Power max. 2 x 360 W 24 VDC (24–27 VDC) 15.0 A 360 W 25.0 A 600 W 2 x 600 W * For ATEX / IECEx compliant model add appendix -EX to order code. ** Maximum current at nominal Vout Redundancy Module Possible TSP input source TSP–REM360 TSP 90-124 TSP 90-124N TSP 180-124 TSP 360-124 TSP–REM600 TSP 600-124 http://www.tracopower.com Page 1 of 4 Redundancy Modules TSP-REM Series 90–360 Watt Output Specifications Ouput Voltage adjustable range with potentiometer24 – 27 VDC Ripple and noise (20 MHz bandwidth)230 mVp-p typ. Capacitive load unlimited General Specifications Operating temperature–25°C to +70°C max. derating above +40°C : 1.5 %/K Storage temperature–25°C to +85°C max. Temperature coefficient0.02 %/K Humidity (non condensing)5 % to 90 % rel. H max. Reliability, calculated MTBF at +25°C acc. to IEC 61709 – TSP–REM360 >2 Mio h – TSP–REM600 >1.9 Mio h Remote On/Offby ext. contact: contact open = On contact closed = Off Alarm relay contact 30 VDC / 1.0 A Redundancy OK signal (Alarm) trigger threshold at 18...22VDC, contact open one or both Remote link cable (0.5 m) 2 cables included (order code TSP-JC) www.tracopower.com/products/tsp-rc-cable.pdf Degree of protection IP 20 (IEC/EN 60529) Isolation according to IEC/EN 60950-1, UL 60950-1, UL 508 Altitude during operation tba. Safety standard Safety approvals IEC/EN 60950-1, UL 60950-, EN60079, UL60079, UL508 – UL 508 www.tracopower.com/products/tsp-rem-ul508.pdf – CSA (UL60079-15-2 class 1, division 2) www.tracopower.com/products/tsp-rem-csa.pdf – CB test certificate IEC 60950-1 (SIQ for EN) www.tracopower.com/products/tsp-rem-cb.pdf – II3G Ex nA nC llC T4 Gcwww.tracopower.com/products/tsp-rem-atex.pdf Electromagnetic compatibility in correspondence to connected units (no internal switching device) Environment – Vibration acc. IEC 60068-2-6; 3 axis, sine sweep, 10 – 55 Hz, 1 g, 1 oct/min – Shock acc. IEC 60068-2-27 3 axis, 15 g half sine, 11 ms Enclosure material aluminium (chassis) / stainless steel (cover) Mounting – DIN-rail mounting for DIN-rails as per EN 50022-35x15/7.5 (snap-on with self-locking spring) – Wall mounting (option) with wall mounting bracket - see page 4 Connection detachable screw terminals (plugs included) 2 terminals per output Installation instructions www.tracopower.com/products/tsp-rem-inst.pdf All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 Redundancy Modules TSP-REM Series 90–360 Watt Function Function Diagram: + DC IN 1 _ TSP J1.2 J2.3 J2.4 + J1.1 J2.1 J2.2 _ J3.1 J3.2 Remote Link 1 + DC IN 2 _ Volt adjust J1.4 J1.3 J4.1 TSP Power Supplies Output Load Remote Link 2 REM Controller J4.2 J5.1 Alarm Redundancy ok J5.2 J5.3 J5.4 Remote On/Off Outline Dimensions 110.0 (1.38) 54.0 (4.33) 38.5 (1.52) 35.0 TSP-REM600 DC OK DC OK DC ON DC ON 110.0 (2.13) O/P ADJ. (3.15) 110.0 (4.33) 5.0 (0.20) L 25.0 (0.98) 5.0 5.0 PE N L (0.20) (0.20) 25.0 (0.98) 80.0 80.0 (3.15) 110.0 (4.33) O/P ADJ. PE N (4.33) 38.5 (1.52) TSP-REM360 14.5 (0.57) P/S http://www.tracopower.com Remote S P P S Remote P/S Page 3 of 4 Redundancy Modules TSP-REM Series 90–360 Watt TSP–WMK Wall Mounting Bracket Ordercode of Kit For Models Content of Kit TSP-WMK03 TSP-REM360, TSP-REM600 1 bracket TSP-WMK03 85.0 (3.35) 42.5 (1.67) 34.5 (1.36) 34.5 (1.36) R 2.12 (0.083) 7.0 (0.28) 15.0 (0.59) 37.0 (1.45) 25.0 (0.98) 25.0 (0.98) 74.0 (2.91) 2.0 (0.08) 55.0 (2.16) 4 x positioning holes 2.0 (0.08) 2.0 (0.08) R 2.12 (0.083) TSP 070 TSP 090 TSP 140 TSP 180 2.0 (0.08) ø 4.25 (0.17) R 2.12 (0.083) ø 4.25 (0.17) R 2.12 (0.083) ø 4.25 (0.17) 15.0 (0.59) Material: 2 mm Mild Steel Tolerance: ±0.1mm (± 0.004) 46.0 (1.81) TSP 360 33.0 (1.30) 96.0 (3.78) 62.5 (2.46) 50.0 (1.97) ø 4.3 (0.17) 2x ø4.3 (0.17) 2.0 (0.08) 30.0 (1.18) 2.0 (0.08) 25 (0.98) 4 x positioning holes TSP 600 Material: 2 mm Mild Steel Tolerance: ±0.1mm (± 0.004) 62.5 (2.46) (0.59) 7.0 (0.28) 173.0 (6.81) 15.0 Dimensions: [mm] ( ) = Inch Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. January 13. 2015 Page 4 of 4