C47F-10 - Teledyne Relays

Series C46F/C47F
Optically Isolated up to 1.75A
Bi-Directional AC/DC Solid-State Relay
ELECTRICAL SPECIFICATIONS
(25°C UNLESS OTHERWISE SPECIFIED)
INPUT (CONTROL) SPECIFICATIONS
Parameter
Min
Max
Units
Control Voltage Range (See Figures 1, 2 and Note 1)
3.8
32
Vdc
12
mAdc
Input Current @ 5 V (See Figures 1 and 2)
Must Turn-On Voltage
3.8
Vdc
Must Turn-Off Voltage (Guaranteed Off)
1.5
Vdc
Reverse Voltage Protection
-32
Vdc
OUTPUT (LOAD) SPECIFICATIONS
Parameter
DC
Parameter
Output Voltage Rating
Output Current Rating
(See Figure 3)
Min
Bi-directional
Max
Min
Max
Units
C47F-10
50
C46F-10
±50
Vdc
C47F-20
90
C46F-20
±90
Vdc
C47F-30
180
C46F-30
±180
Vdc
C47F-40
360
C46F-40
C47F-10
1.75 C46F10
±360
Vdc
1.0
Adc
C47F-20
1.0
C46F-20
0.75
Adc
C47F-30
0.6
C46F-30
0.4
Adc
C47F-40
0.4
C46F-40
0.25
Adc
C47F-10
0.15 C46F-10
0.3
Ohms
On Resistance
C47F-20
0.35 C46F-20
0.7
Ohms
(See Note 3)
C47F-30
1.0
C46F-30
2.0
Ohms
C47F-40
2.0
C46F-40
Leakage Current at Rated Voltage
1.0
Surge Rating (% of Rated) <1 sec
200
Turn-On Time
3
C46F-10,30,40
1.5
C46F-10
C47F-10
C47F-20,30,40
Turn-Off Time
1.0
4.0
Ohms
1.0
mAdc
200
%
3
ms
5
ms
1.0
ms
C47F-10
700
C46F-10
700
pf
Output Capacitance
C47F-20
350
C46F-20
350
pf
(Typical)
C47F-30
300
C46F-30
300
pf
C47F-40
250
C46F-40
250
pf
Insulation Resistance
109
109
Dielectric Strength (Input to Output)
1500
1500
Vac
Capacitance (Input to Output)
10
10
pF
C46F/C47F 18
Ohms
FEATURES/BENEFITS
• Power FET Output with
Very Low On Resistance:
Virtually no offset with low
leakage and voltage drop.
• Switches High Voltages
and Currents: Voltages to
360 Vdc. Current to 1.75
Adc. DC, Bi-directional or
AC models
• Optical Isolation: Isolates
control elements from load
transients. Eliminates
ground loops and signal
ground noise.
• Floating Output: Allows for
high and low side
switching.
• High Noise Immunity:
Control circuit can not be
triggered by output
switching noise.
• 14-pin DIP package
DESCRIPTION
These miniature solid-state
relays utilize a photovoltaic
generator driving high
performance power FET chips
to provide low output onresistance and high output
switching capability. The series
includes DC switching
versions with output current
ratings up to 1.75 amp, and bidirectional versions to switch
AC or DC up to 1.0 amp.
Output voltage ratings of both
types range from 50 to 360
volts. The virtual elimination of
offset voltage makes them
ideal for low level switching
applications as well. Input and
output are optically isolated to
protect input logic circuits from
output voltage transients.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
© 2002 TELEDYNE RELAYS
C46F/C47F\072002\Q1
Series C46F/C47F
CHARACTERISTIC CURVES
MECHANICAL SPECIFICATION
© 2002 TELEDYNE RELAYS
TYPICAL INTERFACE
(800) 284-7007 • www.teledynerelays.com
C46F/C47F 19
C46F/C47F\072002\Q1