TFS469

Filename: 469.doc
version 3.0
VI TELEFILTER
Measurement condition
Ambient temperature:
Input power level:
Terminating impedances *
Input:
Output:
26.09.2002
Filter Specification
TFS 469
1/5
23 °C
0 dBm
270 Ω || -1pF
270 Ω || -1pF
Characteristics
Remark:
Reference level for the relative attenuation arel of the TFS469 is the maximum of the attenuation within the usable signal bandwidth amax. The
maximum of the attenuation within the usable signal bandwidth is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean
value of the upper and lower frequencies at the 3 dB filter attenuation level relative to the insertion loss ae. The nominal frequency fN is fixed at
469,99 MHz without tolerance. The given values for the relative attenuation have to be reached at the frequencies given below even if the centre
frequency fc is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for
the centre frequency fc.
D a t a
typ. value
3,6
dB
Variation / Limitation
max.
5
Insertion loss
(Reference level)
ae = amax
Nominal frequency
fN
-
Centre frequency
fc
469,99
MHz
-
3 dB - bandwidth
BW
265
kHz
-
Usable signal bandwidth
Relative attenuation
fN + 910
kHz
fN ± 0,7 MHz ... fN ± 10
dB
469,99 MHz
-
min. fN ±10
kHz
-
min.
min.
dB
dB
arel
MHz
Temperature coefficient of frequency
TCf **
Frequency inversion temperature
T0
-0,036 ppm/K2
+ 25
°C
52
40
-
Operating temperature range
-
- 10°C ... + 50°C
Storage temperature range
-
- 40°C ... + 85°C
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as
reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.
**) ∆f(Hz) = TCf(ppm/K²) x (T-T0)² x fTo(MHz)
generated:
checked / approved:
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: 469.doc
version 3.0
VI TELEFILTER
26.09.2002
Filter Specification
TFS 469
2/5
Construction and pin connection
(All dimensions in mm)
1
2
3
4
5
6
7
8
9
10
Datecode
M
N
P
...
Ground
Ground
Ground
Ground
Output
Ground
Ground
Ground
Ground
Input
Year + week
2000
2001
2002
50 Ω test circuit 1
L1
10
5
C1
L2
C2
1,2,3,4
6,7,8,9
50 Ω test circuit 2
C1
C2
10
5
L1
L2
1,2,3,4
6,7,8,9
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: 469.doc
version 3.0
VI TELEFILTER
26.09.2002
Filter Specification
TFS 469
3/5
Stability Characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 1,5 mm or 20g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature:
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
reflow possible: twice max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
Packing
Tape & Reel:
IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
Reel of empty components at start:
Reel of empty components at start including leader:
Trailer
Tape (all dimensions in mm)
W
:
16
± 0,3
Po
:
4
± 0,1
Do
:
1,5 + 0,1
E
:
1,75 ± 0,1
F
:
7,5 ± 0,1
G (min) :
0,6
P2
:
2
± 0,1
P1
± 0,1
EMBOSSED CARRIER TAPE
Do
Po
P2
E
Ao
F
D1
:
8
D1(min) :
1,5
Ao
:
5,3
± 0,1
Bo
:
9,7
± 0,1
CT
:
13,5 + 0,1
3000
min 300 mm
min 500 mm
min 300 mm
CT
W
Bo
G
P1
COVER TAPE
W 2
Reel (all dimensions in mm):
A
W1
:
:
330
16,4 +2
W2 (max) :
22,4
N (min)
:
50
C
:
13
+ 0,5 / - 0,2
A
C
N
W 1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.
Markings on the filters can be read if the upper side of the carrier tape is regarded with the sprocket holes on its right.
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: 469.doc
version 3.0
VI TELEFILTER
26.09.2002
Filter Specification
TFS 469
4/5
Air reflow temperature conditions
1st and 2nd air reflow profile
Name:
Temperature:
Time:
pre-heating periods
150 °C - 170 °C
60 sec. - 90 sec.
main-heating periods
over 200 °C
20 sec. - 25 sec.
peak temperature
255 °C ± 5 °C
Chip-mount air reflow profile
260
240
220
200
temperature / °C
180
160
140
120
100
80
60
40
20
0
0
20
40
60
80
100
120
140
160
180
200
220
240
time / sec.
Table for temperature vs. time during the air reflow process
Tolerance of temperatures: ± 5 °C
time / sec.
0
10
20
30
40
50
60
70
80
90
100
110
120
130
temperature / °C
23
34
46
60
80
103
121
134
143
150
154
156
158
159
time / sec.
140
150
160
170
180
190
195
200
205
210
215
220
230
240
temperature / °C
160
161
164
170
180
205
230
255
230
205
180
165
140
120
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: 469.doc
VI TELEFILTER
version 3.0
Filter Specification
26.09.2002
TFS 469
5/5
History
Version
Reason of Changes
Name
Date
3.0
Add history.
Change remark for characteristic.
Add remark for termination impedance.
Change footprint of package.
Correct stability characteristics.
Correct packing information.
Dr. Wall
26.09.2002
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.