SEMiX241DH16s Absolute Maximum Ratings Symbol Conditions Values Unit Tc = 85 °C 240 A Tc = 100 °C 200 A Tj = 25 °C 2250 A Tj = 130 °C 1900 A Tj = 25 °C 25300 A²s Tj = 130 °C 18000 A²s VRSM 1700 V VRRM 1600 V Chip ID ITSM i2t SEMiX® 13 Tj = 130 °C sinus 180° 10 ms 10 ms VDRM (di/dt)cr Tj = 130 °C Bridge Rectifier Module (halfcontrolled) (dv/dt)cr Tj = 130 °C SEMiX241DH16s Module Tj Tstg Visol Features AC sinus 50Hz 1600 V 100 A/µs 1000 V/µs -40 ... 130 °C -40 ... 125 °C 1 min 4000 V 1s 4800 V • Terminal height 17 mm • Chips soldered directly to isolated substrate • UL recognised file no. E63532 Characteristics Typical Applications* VT Tj = 25 °C, IT = 300 A 1.9 V • Input Bridge Rectifier for AC/DC motor control • Power supply VT(TO) Tj = 130 °C 0.85 V rT Tj = 130 °C 4 m IDD;IRD Tj = 130 °C, VDD = VDRM; VRD = VRRM 24 mA Symbol Conditions min. typ. max. Unit Chip tgd Tj = 25 °C, IG = 1 A, diG/dt = 1 A/µs 1 µs tgr VD = 0.67 * VDRM 2 µs tq Tj = 130 °C 150 IH Tj = 25 °C 150 250 mA IL Tj = 25 °C, RG = 33 300 600 mA VGT Tj = 25 °C, d.c. 3 V IGT Tj = 25 °C, d.c. 150 mA VGD Tj = 130 °C, d.c. IGD Tj = 130 °C, d.c. Rth(j-c) sin. 180° µs 0.25 V 6 mA per thyristor 0.32 K/W per diode 0.32 K/W Module Rth(c-s) per chip K/W per module 0.04 K/W Ms to heat sink (M5) 3 5 Mt to terminals (M6) 2.5 5 Nm 5 * 9,81 m/s² a w 350 Nm g DH © by SEMIKRON Rev. 3 – 20.03.2013 1 SEMiX241DH16s Fig. 4L: Power dissipation per module vs. direct current Fig. 4R: Power dissipation per module vs. case temperature Fig. 5: Recovered charge vs. current decrease Fig. 6: Transient thermal impedance vs. time Fig. 7: On-state characteristics Fig. 8: Surge overload current vs. time 2 Rev. 3 – 20.03.2013 © by SEMIKRON SEMiX241DH16s Fig. 9: Gate trigger characteristics spring configuration SEMiX 13 This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX * The specifications of our components may not be considered as an assurance of component characteristics. Components have to be tested for the respective application. Adjustments may be necessary. The use of SEMIKRON products in life support appliances and systems is subject to prior specification and written approval by SEMIKRON. We therefore strongly recommend prior consultation of our staff. © by SEMIKRON Rev. 3 – 20.03.2013 3