SKiiP 83 AHB 08 Absolute Maximum Ratings Symbol Conditions 1) Values Units 800 75 1000 5000 V A A A²s 600 ± 20 50 / 35 100 / 70 V V A A 600 57 / 38 114 / 76 V A A – 40 ... + 150 – 40 ... + 125 – 40 ... + 125 2500 °C °C °C V Bridge Rectifier VRRM ID Theatsink = 80 °C IFSM/ITSM tp = 10 ms; sin. 180 °C, Tj = 25 °C I²t tp = 10 ms; sin. 180 °C, Tj = 25 °C MiniSKiiP 8 SEMIKRON integrated intelligent Power SKiiP 83 AHB 08 half controlled 3-phase bridge rectifier + IGBT braking chopper IGBT Chopper VCES VGES IC ICM Theatsink = 25 / 80 °C tp < 1 ms; Theatsink = 25 / 80 °C Case M8a Freewheeling Diode 2) VRRM IF IFM Tj Tj Tstg Visol Theatsink = 25 / 80 °C tp < 1 ms; Theatsink = 25 / 80 °C Diode & IGBT Thyristor AC, 1 min. Characteristics Symbol Conditions 1) min. typ. max. Units – – – – 1,15 0,8 4,5 – – – – 1,0 V V mΩ K/W – – – – 5 – – – – 500 – – – – – – – – 250 600 – – 1,8 1,1 5 0,9 – 3 150 – – – 125 V V mΩ K/W mA V mA mA mA V/µs A/µs Diode - Rectifier VF VTO rT Rthjh IF = 75 A Tj = 125 °C Tj = 125 °C Tj = 125 °C per diode Thyristor - Rectifier VT VT (TO) rT Rthjh IGD VGT IGT IH IL dv/dtCR di/dtCR IF = 120 A Tj = 25 °C Tj = 125 °C Tj = 125 °C per thyristor Tj = 125 °C Tj = 25 °C Tj = 25 °C Tj = 125 °C © by SEMIKRON • specification of temperature sensor see part A • common characteristics see page B 16 – 3 Options • also available with uncontrolled rectifier (called 82 ANB 08) • also available with powerful chopper, data sheet on request • also available with faster IGBTs IGBT - Chopper IC = 50 A Tj = 25 (125) °C VCEsat td(on) VCC = 300 V; VGE = ± 15 V tr IC = 50 A; Tj = 125 °C Rgon = Rgoff = 22 Ω td(off) tf inductive load Eon + Eoff Cies VCE = 25 V; VGE = 0 V, 1 MHz Rthjh per IGBT UL recognized file no. E63532 – – – – – – – – 2,1(2,2) 60 80 330 550 7,3 2,8 – 0698 2,7(2,8) 120 160 500 830 – – 1,0 V ns ns ns ns mJ nF K/W (type ... 063), data sheet on request 1) 2) Theatsink = 25 °C, unless otherwise specified CAL = Controlled Axial Lifetime Technology (soft and fast recovery) B 16 – 45 MiniSKiiP 8 SEMIKRON integrated intelligent Power SKiiP 83 AHB 08 half controlled 3-phase bridge rectifier + IGBT braking chopper Case M8a SKiiP 83 AHB 08 Characteristics Symbol Conditions 1) min. typ. max. Units – – – – – – – 1,45(1,4) 0,85 11 50 5,0 1,5 – 1,7(1,7) 0,9 16 – – – 1,2 V V mΩ A µC mJ K/W Diode 2) - Freewheeling VF = VEC VTO rT IRRM Qrr Eoff Rthjh IF = 50 A Tj = 25 (125) °C Tj = 125 °C Tj = 125 °C IF = 50 A; VR = – 300 V diF/dt = – 800 A/µs VGE = 0 V, Tj = 125 °C per diode Temperature Sensor RTS T = 25 / 100 °C Ω 1000 / 1670 Mechanical Data M1 Case B 16 – 46 case to heatsink, SI Units mechanical outline see pages B 16 – 13 and B 16 – 14 0698 2,5 – M8a 3,5 Nm © by SEMIKRON Fig. 1 Typ. output characteristic, tp = 80 µs; 25 °C Fig. 2 Typ. output characteristic, tp = 80 µs; 125 °C Tj = 125 °C VCE = 300 V VGE = ± 15 V IC = 50 A Tj = 125 °C VCE = 300 V VGE = ± 15 V RG = 22 Ω Fig. 3 Turn-on /-off energy = f (IC) Fig. 4 Turn-on /-off energy = f (RG) VGE = 0 V f = 1 MHz ICpuls = 50 A Fig. 5 Typ. gate charge characteristic © by SEMIKRON Fig. 6 Typ. capacitances vs. VCE 0698 B 16 – 47 Fig. 7 Gate trigger characteristics B 16 – 48 0698 © by SEMIKRON 2. Common characteristics of MiniSKiiP MiniSKiiP 600 V ICop / IC 1.2 Mini0607 Tj = 150 °C VGE = ≥ 15 V 1.0 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 Th [°C] Fig. 7 Rated current of the IGBT ICop / IC = f (Th) Tj = ≤ 150 °C VGE = ± 15 V tsc = ≤ 10 µs Lext < 25 nH Tj = ≤ 150 °C VGE = ± 15 V Fig. 9 Turn-off safe operating area (RBSOA) of the IGBT Fig. 10 Safe operating area at short circuit of the IGBT Fig. 11 Typ. freewheeling diode forward characteristic Fig. 12 Forward characteristic of the input bridge diode © by SEMIKRON 0698 B 16 – 3 MiniSKiiP 8 Input bridge part SKiiP 82 ANB 08 SKiiP 83 ANB 08 SKiiP 81 ANB 15 SKiiP 82 ANB 15 SKiiP 83 ANB 15 SKiiP 83 AHB 15 SKiiP 83 ATB 15 Circuit ANB Case M8a MiniSKiiP 8 Circuit AHB Input bridge part SKiiP 82 ANB 08 SKiiP 83 ANB 08 SKiiP 81 ANB 15 SKiiP 82 ANB 15 SKiiP 83 ANB 15 SKiiP 83 AHB 15 SKiiP 83 ATB 15 Case M8a Layout and connections for the customer’s printed circuit board Circuit ATB Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Diode bridge ANB reserved ~1 ~2 reserved reserved ~3 reserved reserved reserved + – + – Gate Br Br T+ T– Connection Halfcontrolled AHB Thyristor bridge ATB reserved G2 Bot ~1 ~1 ~2 ~2 reserved G1 Bot G2 Top G2 Top ~3 ~3 G1 Top G1 Top G3 Top G3 Top reserved G3 Bot + + – – + + – – Gate Br Gate Br Br Br T+ T+ T– T–