70-W624N3A1K2SC01-L400FP10 target datasheet flow NPC 12w 2400 V / 1200 A Features 3xflow SCREW 4w 12mm housing ● 2400V NPC-topology ● Low inductive ● High power screw interface Schematic Target applications ● Solar inverter ● Wind Power ● Motor Drive Types ● 70-W624N3A1K2SC01-L400FP10 Maximum Ratings Tj=25°C, unless otherwise specified Parameter Condition Symbol Value Unit 1200 V 956 A 3600 A 2241 W Buck Switch Collector-emitter voltage Collector current V CES IC T S=80°C T j=T jmax Repetitive peak collector current I CRM t p limited by T jmax Total power dissipation P tot T j=T jmax Gate-emitter voltage V GES ±20 V Maximum Junction Temperature T jmax 175 °C Copyright Vincotech T S =80°C 1 26 Aug. 2015 / Revision 2 70-W624N3A1K2SC01-L400FP10 target datasheet Parameter Condition Symbol Value Unit 1200 V 1081 A 3600 A 2234 W Boost Switch Collector-emitter voltage Collector current V CES IC T j=T jmax T S=80°C Repetitive peak collector current I CRM t p limited by T jmax Total power dissipation P tot T j=T jmax Gate-emitter voltage VGES ±20 V Maximum Junction Temperature T jmax 175 °C Value Unit 1200 V 848 A 6600 A Parameter T S=80°C Conditions Symbol Buck diode Peak Repetitive Reverse Voltage Continuous (direct) forward current Surge (non-repetitive) forward current V RRM IF I FSM 2 T j=T jmax T h =80°C 50Hz Single Half Sine Wave 2 Surge current capability I t t p=10ms 50Hz sine T j=150°C 217800 A s Total power dissipation P tot T j=T jmax T h=80°C 1447 W Maximum Junction Temperature T jmax 175 °C Value Unit 1200 V 724 A 1800 A 1176 W 175 °C Parameter Conditions Symbol Boost diode Peak Repetitive Reverse Voltage Continuous (direct) forward current V RRM IF Repetitive peak forward current I FRM Total power dissipation P tot Maximum Junction Temperature T jmax Copyright Vincotech T j=T jmax T h=80°C T j=T jmax T h=80°C 2 26 Aug. 2015 / Revision 2 70-W624N3A1K2SC01-L400FP10 target datasheet Module Properties Parameter Conditions Symbol Value Unit Thermal Properties Storage temperature T stg -40…+125 °C Operation Junction Temperature T jop -40…+(T jmax - 25) °C 4000 V Creepage distance min 12,7 mm Clearance min 12,7 mm Isolation Properties Isolation voltage Comparative Tracking Index Copyright Vincotech V isol DC voltage t p=2s >200 CTI 3 26 Aug. 2015 / Revision 2 70-W624N3A1K2SC01-L400FP10 target datasheet Characteristic Values Buck Switch Parameter Symbol Conditions V GE [V] V CE [V] Value I C [A] T j[ °C] Unit Min Typ Max 5,3 5,8 6,3 25 1,85 2,07 150 2,25 Static Gate-emitter threshold voltage V GE(th) V GE=V CE Collec tor-emitter saturation voltage V CEsat 0,0408 15 1200 Collec tor-emitter cut-off c urrent I CES 0 1200 Gate-emitter leakage current I GES 20 0 Internal gate resistance Input capacitance 125 25 24 125 25 120 125 0,167 rg V V µA nA Ω 67200 C ies f=1MHz Reverse transfer c apac itanc e 25 0 25 25 pF 2400 C res Thermal Thermal resistanc e junction to sink R th(j-s) Phase-Change Material ʎ =3,4W/mK 0,042 K/W Value Unit Boost switch Parameter Symbol Conditions V GE [V] V CE [V] I C [A] T j[ °C] Min Typ Max 5,1 5,8 6,4 1,75 1,97 Static Gate-emitter threshold voltage V GE(th) V GE=V CE Collec tor-emitter saturation voltage V CEsat 0,0456 15 1200 Collec tor-emitter cut-off c urrent I CES 0 1200 Gate-emitter leakage current I GES 20 0 Internal gate resistance Input capacitance 125 25 125 25 15,6 125 25 1440 125 0,625 rg V V µA nA Ω 75600 C ies f=1MHz Reverse transfer c apac itanc e 25 0 25 25 pF 3240 C res Thermal Thermal resistanc e junction to sink Copyright Vincotech R th(j-s) Phase-Change Material ʎ =3,4W/mK 0,043 4 K/W 26 Aug. 2015 / Revision 2 70-W624N3A1K2SC01-L400FP10 target datasheet Buck diode Parameter Symbol Conditions Value V r [V] I F [A] T j [°C] Min Unit Typ Max 25 2,20 2,52 150 2,15 Static Forward voltage VF Reverse leakage current Ir 1200 1200 25 1440 150 212400 V µA Thermal Thermal resistanc e junction to sink R th(j-s) Phase-Change Material λ=3,4W/mK 0,066 K/W Value Unit Boost diode Parameter Symbol Conditions V r [V] I F [A] T j [°C] Min Typ Max 1,70 2,05 V 168 µA Static Forward voltage VF Reverse leakage current Ir 900 1200 25 25 Thermal Thermal resistanc e junction to sink Parameter R th(j-s) Phase-Change Material λ=3,4W/mK Symbol Conditions Min 0,081 K/W Value Unit Typ Max Module Properties Module inductanc e (from chips to PCB) Chip module lead resistance, terminals -c hip LsCE Rcc'1+EE' Mounting torque M Mounting torque M Terminal connection torque M Weight G Copyright Vincotech Buck tbd. Boost tbd. Tc=25°C , per switch Screw M4 - mounting according to valid application note FSWB-M-03-HI Screw M5 - mounting according to valid application note FSWB-M-03-HI Screw M6 - mounting according to valid application note FSWB-M-03-HI 5 nH tbd. mΩ 2 2,2 Nm 4 6 Nm 2,5 5 Nm tbd g 26 Aug. 2015 / Revision 2 70-W624N3A1K2SC01-L400FP10 target datasheet Outline Pin table [mm] Pin table [mm] Pin table [mm] Pin X1 Y1 Function G roup Pin X1 Y1 Function G roup Pin X1 Y1 Func tion G roup 1.1 - 2,15 84,85 G1- 1 T1 1.23 98,85 84,85 G1-3 T1 1.45 199,85 84,85 G1-5 T1 1.2 - 2,15 81,95 E1- 1 T1 1.24 98,85 81,95 E1-3 T1 1.46 199,85 81,95 E1-5 T1 1.3 46,15 84,85 G1- 2 T1 1.25 147,15 84,85 G1-4 T1 1.47 248,15 84,85 G1-6 T1 1.4 46,15 81,95 E1- 2 T1 1.26 147,15 81,95 E1-4 T1 1.48 248,15 81,95 E1-6 T1 1.5 19,45 93,05 DC + desat T1 1.27 120,45 93,05 DC + desat T1 1.49 221,45 93,05 DC + desat T1 1.6 24,55 93,05 DC + desat T1 1.28 125,55 93,05 DC + desat T1 1.50 226,55 93,05 DC + desat T1 1.7 - 7,65 70,05 G2- 1 T2 1.29 93,35 70,05 G2-3 T2 1.51 194,35 70,05 G2-5 T2 1.8 - 7,65 67,15 E2- 1 T2 1.30 93,35 67,15 194,35 67,15 E2-5 T2 51,65 70,05 G2- 2 T2 1.31 152,65 70,05 T2 T2 1.52 1.9 E2-3 G2-4 1.53 253,65 70,05 G2-6 T2 67,15 E2- 2 T2 1.32 152,65 67,15 E2-4 T2 1.54 253,65 67,15 E2-6 T2 1.11 16,75 75,35 GND desat D5 1.33 117,75 75,35 GND desat D5 1.55 218,75 75,35 GND desat D5 1.12 1.10 27,25 75,35 GND desat D5 1.34 128,25 75,35 GND desat D5 1.56 229,25 75,35 GND desat D5 T3 1.13 51,65 - 2,55 28 G3- 1 T3 1.35 98,45 28 G3-3 T3 1.57 199,45 28 G3-5 1.14 - 5,45 28 E3- 1 T3 1.36 95,55 28 E3-3 T3 1.58 196,55 28 E3-5 T3 1.15 46,55 28 G3- 2 147,55 28 G3-4 T3 1.59 248,55 28 G3-6 T3 1.16 49,45 28 E3- 2 T3 T3 1.37 1.38 150,45 28 E3-4 T3 1.60 251,45 28 E3-6 T3 1.17 -4,8 50,85 G4- 1 T4 1.39 96,2 50,85 G4-3 T4 1.61 197,2 50,85 G4-5 T4 1.18 -1,6 49,05 E4- 1 T4 1.40 99,4 49,05 E4-3 T4 1.62 200,4 49,05 E4-5 T4 1.19 48,8 50,85 G4- 2 T4 1.41 149,8 50,85 G4-4 T4 1.63 250,8 50,85 G4-6 T4 1.20 45,6 49,05 E4- 2 T4 1.42 146,6 49,05 E4-4 T4 1.64 247,6 49,05 E4-6 T4 Therm11 Therm12 Rt1 Rt1 1.43 168,65 89,8 89,8 86,7 Rt2 Rt2 269,65 168,65 Therm21 Therm22 1.65 1.44 1.66 269,65 86,7 Therm31 Therm32 Rt3 Rt3 1.21 67,65 89,8 1.22 67,65 86,7 Power connections M6 screw X2 Y2 Function 2.1 0 0 Phase 2.2 22 0 Phase 2.3 44 0 Phase 2.4 0 110,41 DC+ 2.5 22 110,41 GND 2.6 44 110,41 DC- 2.7 101 0 Phase 0 Phase 2.9 145 0 Phase 2.10 2.8 101 123 110,41 DC+ 2.11 123 110,41 GND 2.12 145 110,41 DC- 2.13 202 0 Phase 2.14 224 0 Phase 2.15 246 0 Phase 2.16 202 110,41 DC+ 2.17 2.18 224 246 110,41 110,41 GND DC Copyright Vincotech 6 26 Aug. 2015 / Revision 2 70-W624N3A1K2SC01-L400FP10 target datasheet Ordering Code & Marking Version without thermal paste Ordering Code 70-W624N3A1K2SC01-L400FP10 Name Date code Lot Serial Vinco Text in DataMatrix as L400FP10 in packaging barcode as L400FP10 Name Date code UL & Vinco Lot Serial NN-NNNNNNNNNNNNNN-NNNNNNNN WWYY UL Vinco LLLLL SSSS Datamatrix UL Type Lot number Serial Date code TTTT-TTT LLLLL SSSS WWYY Pinout Identification ID T1,T4 D5,D6 T2,T3 D1,D4 D2,D3 Rt1,Rt2,Rt3 Copyright Vincotech Component IGBT FWD IGBT FWD FWD NTC Voltage 1200 V 1200 V 1200 V 1200 V 1200 V - Current 1200 A 1200 A 1200 A 1200 A 1200 A - Function Buck Switch Buck Diode Boost Switch Boost Diode Boost Inv. Diode Thermistor 7 Comment 26 Aug. 2015 / Revision 2 70-W624N3A1K2SC01-L400FP10 target datasheet Packaging instruction Standard packaging quantity (SPQ) 5 >SPQ Standard <SPQ Sample Handling instruction Handling instructions for 3xflow SCREW 4w packages see vincotech.com website. Document No.: Date: 70-W624N3A1K2SC01-L400FP10-T2-14 26 Aug. 2015 Modification: Pages Product status definition Datasheet Status Product Status Target Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. The data contained is exclusively intended for technically trained staff. DISCLAIMER The information, specifications, procedures, methods and recommendations herein (together “information”) are presented by Vincotech to reader in good faith, are believed to be accurate and reliable, but may well be incomplete and/or not applicable to all conditions or situations that may exist or occur. Vincotech reserves the right to make any changes without further notice to any products to improve reliability, function or design. No representation, guarantee or warranty is made to reader as to the accuracy, reliability or completeness of said information or that the application or use of any of the same will avoid hazards, accidents, losses, damages or injury of any kind to persons or property or that the same will not infringe third parties rights or give desired results. It is reader’s sole responsibility to test and determine the suitability of the information and the product for reader’s intended use. LIFE SUPPORT POLICY Vincotech products are not authorised for use as critical components in life support devices or systems without the express written approval of Vincotech. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in labelling can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Copyright Vincotech 8 26 Aug. 2015 / Revision 2