V23990-P849-A58/A59/C58/C59-PM preliminary datasheet Output Inverter Application flowPIM0 3rd Gen 1200V/8A General conditions 3phase SPWM VGEon = 15 V VGEoff = -15 V Rgon = 32 Ω Rgoff = 32 Ω IGBT Figure 1 FRED Figure 2 Typical average static loss as a function of output current Ploss = f(Iout) Typical average static loss as a function of output current Ploss = f(Iout) 16 Ploss (W) Ploss (W) 25 Mi*cosfi=1 14 Mi*cosfi=-1 20 12 10 15 8 10 6 4 5 2 Mi*cosfi=1 Mi*cosfi=-1 0 0 0 2 4 6 8 10 12 14 Iout (A) 0 16 At Tj=125°C Mi*cosfi from -1 to 1 in steps of 0,2 4 6 8 10 12 14 Iout (A) 16 At Tj=125°C Mi*cosfi from -1 to 1 in steps of -0,2 IGBT Figure 3 Typical average switching loss as a function of output current FRED Figure 4 Typical average switching loss as a function of output current Ploss = f(Iout) Ploss (W) Ploss (W) 2 20,0 18,0 Ploss = f(Iout) 8,0 fsw=16kHz 7,0 fsw=16kHz 16,0 6,0 14,0 5,0 12,0 4,0 10,0 8,0 3,0 6,0 2,0 4,0 1,0 2,0 fsw=2kHz fsw=2kHz 0,0 0,0 0 At Tj = 2 125 4 6 8 10 12 14Iout (A) 0 16 At Tj = °C DC link = 600 V fsw from 2 kHz to 16 kHz in 2 steps Copyright by Vincotech 2 125 4 6 8 10 12 14 Iout (A) °C DC link = 600 V fsw from 2 kHz to 16 kHz in 2 steps 1 Revision: 2 16 V23990-P849-A58/A59/C58/C59-PM preliminary datasheet Output Inverter Application Phase Figure 5 Typical available 50Hz output current as a function Mi*cosfi Typical available 50Hz output current as a function of switching frequency Iout (A) Iout = f(Mi*cosfi) 12 Th=60°C Iout (A) Phase Figure 6 Iout = f(fsw) 12 Th=60°C 10 10 8 8 Th=100°C Th=100°C 6 6 4 4 2 2 0 0 -1,0 -0,8 At Tj = -0,6 -0,4 125 -0,2 0,0 0,2 0,4 0,6 0,8 1,0 Mi*cosfi 1 At Tj = °C DC link = 600 V fsw = 8 kHz Th from 60 °C to 100 °C in steps of 5 °C 10 125 100 fsw (kHz) °C DC link = 600 V Mi*cosfi = 0,8 Th from 60 °C to 100 °C in steps of 5 °C Phase Figure 7 Typical available 0Hz output current as a function Ioutpeak = f(fsw) of switching frequency Iout (Apeak) -1,00 -0,80 Iout (A) Phase Figure 8 Typical available 50Hz output current as a function of Iout = f(fsw, Mi*cosfi) Mi*cosfi and switching frequency 12 Th=60°C 10 -0,60 -0,40 11,3-12,0 8 10,5-11,3 -0,20 9,0-9,8 0,00 8,3-9,0 7,5-8,3 Th=100°C Mi*cosfi 9,8-10,5 6 0,20 6,8-7,5 6,0-6,8 4 0,40 0,60 2 0,80 0 1,00 1 2 4 8 16 32 1 fsw 10 At Tj = 125 °C At Tj = DC link = Th = 600,00 80 V °C DC link = 600,00 V Th from 60 °C to 100 °C in steps of 5 °C Copyright by Vincotech 2 125 fsw (kHz) °C Revision: 2 100 V23990-P849-A58/A59/C58/C59-PM preliminary datasheet Output Inverter Application Inverter Figure 9 Typical efficiency as a function of output power efficiency=f(Pout) efficiency (%) Pout (kW) Inverter Figure 10 Typical available peak output power as a function of Pout=f(Th) heatsink temperature 6,0 2kHz 5,0 100,0 99,0 2kHz 4,0 98,0 3,0 97,0 16kHz 16kHz 2,0 96,0 1,0 95,0 0,0 94,0 60 65 At Tj = 70 125 75 80 85 90 95 100 Th ( o C) 0,0 At Tj = °C DC link = 600 V Mi = 1 cosfi = 0,80 fsw from 2 kHz to 16 kHz in 2 steps 1,0 125 2,0 3,0 4,0 5,0 6,0 7,0 8,0 Pout (kW) °C DC link = 600 V Mi = 1 cosfi = 0,80 fsw from 2 kHz to 16 kHz in 2 steps Inverter Figure 11 Overload (%) Typical available overload factor as a function of Ppeak / Pnom=f(Pnom,fsw) motor power and switching frequency 400 350 300 250 200 Switching frequency (kHz) 150 Motor nominal power (HP/kW) 100 0,75 / 0,55 1,00 / 0,74 1,50 / 1,10 2,00 / 1,47 3,00 / 2,21 5,00 / 3,68 1 799 599 399 300 200 120 2 799 599 399 300 200 120 4 799 599 399 300 200 120 8 710 532 355 266 177 0 16 551 413 276 207 138 0 At Tj = 125 °C DC link = Mi = 600 1 V cosfi = 0,8 fsw from 1 kHz to 16 kHz in 2 steps Th = 90 °C Motor eff = 0,85 Copyright by Vincotech 3 Revision: 2 V23990-P849-A58/A59/C58/C59-PM preliminary datasheet PRODUCT STATUS DEFINITIONS Datasheet Status Target Preliminary Final Product Status Definition Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. The data contained is exclusively intended for technically trained staff. First Production This datasheet contains preliminary data, and supplementary data may be published at a later date. Vincotech reserves the right to make changes at any time without notice in order to improve design. The data contained is exclusively intended for technically trained staff. Full Production This datasheet contains final specifications. Vincotech reserves the right to make changes at any time without notice in order to improve design. The data contained is exclusively intended for technically trained staff. DISCLAIMER Vincotech reserves the right to make changes without further notice to any products herein to improve reliability, function or design. Vincotech does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. LIFE SUPPORT POLICY Vincotech products are not authorised for use as critical components in life support devices or systems without the express written approval of Vincotech. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in labelling can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Copyright by Vincotech 4 Revision: 2