V23990-P589-A31-PM Output Inverter Application

V23990-P589-A31-PM
preliminary datasheet
Output Inverter Application
flowPIM 1 3rd gen
1200V / 25A
General conditions
3phase SPWM
VGEon = 15 V
VGEoff = -15 V
Rgon = 16 Ω
Rgoff = 16 Ω
IGBT
Figure 1
Typical average static loss as a function of output current
Ploss = f(Iout)
70
60
60
Ploss (W)
Ploss (W)
FRED
Figure 2
Typical average static loss as a function of output current
Ploss = f(Iout)
Mi*cosfi = 1
50
Mi*cosf i= -1
50
40
40
30
30
20
20
10
10
Mi*cosfi = -1
0
At
Tj =
5
10
125
15
20
25
30
35
40
45
Iout (A)
0
50
5
At
Tj =
°C
Mi*cosφ from -1 to 1 in steps of 0.2
10
125
15
20
25
30
35
40
45
Iout (A)
50
°C
Mi*cosφ from -1 to 1 in steps of 0.2
IGBT
Figure 3
Typical average switching loss
as a function of output current
FRED
Figure 4
Typical average switching loss
as a function of output current
Ploss = f(Iout)
Ploss (W)
Ploss (W)
Mi*cosfi = 1
0
0
45.0
Ploss = f(Iout)
30.0
40.0
25.0
fsw = 16kHz
fsw = 16kHz
35.0
20.0
30.0
25.0
15.0
20.0
10.0
15.0
10.0
5.0
5.0
fsw = 2kHz
fsw = 2kHz
0.0
0.0
0
5
10
15
20
25
30
At
Tj =
125
DC link =
fsw from
600
V
2 kHz to 16 kHz in steps of factor 2
copyright by Vincotech
35
40
45 (A)
Iout
0
50
°C
1
5
10
15
20
25
30
At
Tj =
125
DC link =
fsw from
600
V
2 kHz to 16 kHz in steps of factor 2
35
40
45
50
Iout (A)
°C
Revision: 1
V23990-P589-A31-PM
preliminary datasheet
Output Inverter Application
flowPIM 1 3rd gen
Phase
Figure 5
Typical available 50Hz output current
as a function Mi*cosφ
Typical available 50Hz output current
as a function of switching frequency
Iout = f(Mi*cos φ)
Iout (A)
Iout (A)
Phase
Figure 6
35
Th = 60°C
30
25
25
20
Iout = f(fsw)
35
30
Th = 60°C
20
Th = 100°C
Th = 100°C
15
15
10
10
5
5
0
-1.0
1200V / 25A
0
-0.8
-0.6
-0.4
-0.2
0.0
0.2
At
Tj =
125
DC link =
fsw =
Th from
600
V
4
kHz
60 °C to 100 °C in steps of 5 °C
0.4
0.6
0.8
1.0
Mi*cos φ
1
At
Tj =
°C
10
125
fsw (kHz)
100
°C
DC link = 600
V
Mi*cos φ = 0.8
Th from
60 °C to 100 °C in steps of 5 °C
Phase
Figure 7
Typical available 0Hz output current as a function
Ioutpeak = f(fsw)
of switching frequency
Iout (Apeak)
-1.00
-0.80
Iout (A)
Phase
Figure 8
Typical available 50Hz output current as a function of
Iout = f(fsw, Mi*cos φ)
Mi*cos φ and switching frequency
35
30
Th = 60°C
-0.60
30.0-33.0
25
-0.40
27.0-30.0
24.0-27.0
-0.20
18.0-21.0
0.00
15.0-18.0
12.0-15.0
20
Mi*cosfi
21.0-24.0
15
0.20
9.0-12.0
6.0-9.0
3.0-6.0
0.40
Th = 100°C
10
0.60
5
0.80
0
1.00
1
2
4
8
16
fsw
32
64
1
10
At
Tj =
125
°C
At
Tj =
125
DC link =
Th =
600
80
V
°C
DC link =
Th from
600
V
60 °C to 100 °C in steps of 5 °C
Mi =
0
copyright by Vincotech
2
fsw (kHz)
100
°C
Revision: 1
V23990-P589-A31-PM
preliminary datasheet
Output Inverter Application
flowPIM 1 3rd gen
Inverter
Figure 9
Typical efficiency as a function of output power
efficiency=f(Pout)
efficiency (%)
Pout (kW)
Inverter
Figure 10
Typical available peak output power as a function of
Pout=f(Th)
heatsink temperature
16.0
14.0
1200V / 25A
2kHz
100.0
99.0
2kHz
98.0
12.0
97.0
10.0
96.0
16kHz
8.0
95.0
16kHz
6.0
94.0
93.0
4.0
92.0
2.0
91.0
0.0
90.0
60
65
70
75
80
85
At
Tj =
125
DC link =
Mi =
cos φ=
fsw from
600
V
1
0.80
2 kHz to 16 kHz in steps of factor 2
90
95
100
Th ( o C)
0.0
°C
5.0
10.0
15.0
At
Tj =
125
DC link =
Mi =
cos φ=
fsw from
600
V
1
0.80
2 kHz to 16 kHz in steps of factor 2
20.0
Pout (kW)
25.0
°C
Inverter
Figure 11
Overload (%)
Typical available overload factor as a function of
Ppeak / Pnom=f(Pnom,fsw)
motor power and switching frequency
400
350
300
250
200
150
Switching frequency (kHz)
Motor nominal power (HP/kW)
100
0,02 / 0,01
0,03 / 0,02
0,05 / 0,04
0,08 / 0,06
0,10 / 0,07
0,15 / 0,11
1
794
530
318
212
159
0
2
794
530
318
212
159
0
4
794
530
318
212
159
0
8
791
528
317
211
158
0
16
635
424
254
169
127
0
At
Tj =
125
°C
DC link =
Mi =
600
1
V
cos φ=
fsw from
Th =
0.8
1 kHz to 16kHz in steps of factor 2
80
°C
Motor eff = 0.85
copyright by Vincotech
3
Revision: 1
V23990-P589-A31-PM
preliminary datasheet
PRODUCT STATUS DEFINITIONS
Datasheet Status
Target
Preliminary
Final
Product Status
Definition
Formative or In Design
This datasheet contains the design specifications for
product development. Specifications may change in any
manner without notice. The data contained is exclusively
intended for technically trained staff.
First Production
This datasheet contains preliminary data, and
supplementary data may be published at a later date.
Vincotech reserves the right to make changes at any time
without notice in order to improve design. The data
contained is exclusively intended for technically trained
staff.
Full Production
This datasheet contains final specifications. Vincotech
reserves the right to make changes at any time without
notice in order to improve design. The data contained is
exclusively intended for technically trained staff.
DISCLAIMER
The information given in this datasheet describes the type of component and does not represent assured characteristics. For tested
values please contact Vincotech.Vincotech reserves the right to make changes without further notice to any products herein to improve
reliability, function or design. Vincotech does not assume any liability arising out of the application or use of any product or circuit
described herein; neither does it convey any license under its patent rights, nor the rights of others.
LIFE SUPPORT POLICY
Vincotech products are not authorised for use as critical components in life support devices or systems without the express written
approval of Vincotech.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or
sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in labelling can be
reasonably expected to result in significant injury to the user.
2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its safety or effectiveness.
copyright by Vincotech
4
Revision: 1