FZ12 / F0122PA150SC preliminary datasheet Output Inverter Application flowPHASE0 1200V/150A General conditions 3phase SPWM VGEon = 15 V VGEoff = -15 V Rgon = 2 Ω Rgoff = 2 Ω IGBT Figure 1 Typical average static loss as a function of output current Ploss = f(Iout) 200 160 180 Ploss (W) Ploss (W) FRED Figure 2 Typical average static loss as a function of output current Ploss = f(Iout) Mi*cosfi = 1 140 Mi*cosf i= -1 160 120 140 100 120 80 100 80 60 60 40 40 20 20 Mi*cosfi = -1 0 At Tj = 20 40 150 60 80 100 120 140 160 Iout (A) 0 180 At Tj = °C Mi*cosφ from -1 to 1 in steps of 0,2 20 40 150 60 80 100 120 140 160 Iout (A) 180 °C Mi*cosφ from -1 to 1 in steps of 0,2 IGBT Figure 3 Typical average switching loss as a function of output current FRED Figure 4 Typical average switching loss as a function of output current Ploss = f(Iout) Ploss (W) Ploss (W) Mi*cosfi = 1 0 0 250,0 Ploss = f(Iout) 90,0 80,0 fsw = 16kHz 200,0 fsw = 16kHz 70,0 60,0 150,0 50,0 40,0 100,0 30,0 20,0 50,0 10,0 fsw = 2kHz fsw = 2kHz 0,0 0,0 0 20 40 60 80 100 At Tj = 150 DC link = fsw from 600 V 2 kHz to 16 kHz in steps of factor 2 copyright by Vincotech 120 140 0 160 Iout (A) 180 °C 1 20 40 60 80 100 At Tj = 150 DC link = fsw from 600 V 2 kHz to 16 kHz in steps of factor 2 120 140 160 180 Iout (A) °C Revision: 1 FZ12 / F0122PA150SC preliminary datasheet Output Inverter Application flowPHASE0 Phase Figure 5 Typical available 50Hz output current as a function Mi*cosφ 1200V/150A Phase Figure 6 Typical available 50Hz output current as a function of switching frequency Iout = f(Mi*cos φ) Iout (A) Iout (A) 180 160 160 Iout = f(fsw) Th = 60°C 140 140 120 Th = 60°C 120 100 100 80 Th = 100°C 80 Th = 100°C 60 60 40 40 20 20 0 -1,0 0 -0,8 -0,6 -0,4 -0,2 0,0 0,2 At Tj = 150 DC link = fsw = Th from 600 V 4 kHz 60 °C to 100 °C in steps of 5 °C 0,4 0,6 0,8 1,0 Mi*cos φ 1 At Tj = °C 10 150 fsw (kHz) 100 °C DC link = 600 V Mi*cos φ = 0,8 Th from 60 °C to 100 °C in steps of 5 °C Phase Figure 7 Typical available 0Hz output current as a function Ioutpeak = f(fsw) of switching frequency Iout (Apeak) -1,00 -0,80 Iout (A) Phase Figure 8 Typical available 50Hz output current as a function of Iout = f(fsw, Mi*cos φ) Mi*cos φ and switching frequency 120 Th = 60°C 100 -0,60 -0,40 110,0-125,0 80 95,0-110,0 80,0-95,0 65,0-80,0 0,00 50,0-65,0 35,0-50,0 Mi*cosfi -0,20 60 Th = 100°C 0,20 20,0-35,0 5,0-20,0 40 0,40 0,60 20 0,80 0 1,00 1 2 4 8 16 32 64 1 fsw 10 At Tj = 150 °C At Tj = 150 DC link = Th = 600 80 V °C DC link = Th from 600 V 60 °C to 100 °C in steps of 5 °C Mi = 0 copyright by Vincotech 2 fsw (kHz) 100 °C Revision: 1 FZ12 / F0122PA150SC preliminary datasheet Output Inverter Application flowPHASE0 Inverter Figure 9 Inverter Figure 10 Typical efficiency as a function of output power efficiency=f(Pout) efficiency (%) Typical available peak output power as a function of Pout=f(Th) heatsink temperature Pout (kW) 1200V/150A 80,0 70,0 100,0 2kHz 99,0 98,0 60,0 2kHz 97,0 50,0 96,0 16kHz 40,0 95,0 94,0 30,0 93,0 20,0 16kHz 92,0 10,0 91,0 0,0 90,0 60 65 70 75 80 85 At Tj = 150 DC link = Mi = cos φ= fsw from 600 V 1 0,80 2 kHz to 16 kHz in steps of factor 2 90 95 100 Th ( o C) 0,0 °C 10,0 20,0 30,0 40,0 50,0 At Tj = 150 DC link = Mi = cos φ= fsw from 600 V 1 0,80 2 kHz to 16 kHz in steps of factor 2 60,0 70,0 80,0 90,0 Pout (kW) °C Inverter Figure 11 Overload (%) Typical available overload factor as a function of Ppeak / Pnom=f(Pnom,fsw) motor power and switching frequency 450 400 350 300 250 200 Motor nominal power (HP/kW) Switching frequency (kHz) 150 100 15,00 / 11,03 20,00 / 14,71 25,00 / 18,39 30,00 / 22,07 40,00 / 29,42 50,00 / 36,78 1 459 344 275 229 172 138 2 433 325 260 216 162 130 4 386 289 231 193 145 116 8 309 232 185 154 116 0 16 207 155 124 0 0 0 At Tj = 150 °C DC link = Mi = 600 1 V cos φ= fsw from Th = 0,8 1 kHz to 16kHz in steps of factor 2 80 °C Motor eff = 0,85 copyright by Vincotech 3 Revision: 1 FZ12 / F0122PA150SC preliminary datasheet PRODUCT STATUS DEFINITIONS Datasheet Status Target Preliminary Final Product Status Definition Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. The data contained is exclusively intended for technically trained staff. First Production This datasheet contains preliminary data, and supplementary data may be published at a later date. Vincotech reserves the right to make changes at any time without notice in order to improve design. The data contained is exclusively intended for technically trained staff. Full Production This datasheet contains final specifications. Vincotech reserves the right to make changes at any time without notice in order to improve design. The data contained is exclusively intended for technically trained staff. DISCLAIMER The information given in this datasheet describes the type of component and does not represent assured characteristics. For tested values please contact Vincotech.Vincotech reserves the right to make changes without further notice to any products herein to improve reliability, function or design. Vincotech does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. LIFE SUPPORT POLICY Vincotech products are not authorised for use as critical components in life support devices or systems without the express written approval of Vincotech. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in labelling can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. copyright by Vincotech 4 Revision: 1