POL10 - ARCH Electronics Corp.

VER : A_0
update : 2014.04.25
DC-DC Brick
POL10/16 SERIES
10/16 A
DESCRIPTION
KEY FEATURES
 Input under Voltage Protection
POL series are high performance SIP POL models, whose feature include wide
 Over Current Protection (Hiccup Mode)
range of input voltage, high power density and perfect protection functions.
 Short Circuit Protection (Hiccup Mode)
This series include BUCK and BOOST models, the output current covering 10A
 Over Voltage Protection (Self-recovery) * *
and 16A two levels. The output voltage can be set arbitrarily in the rating range.
 Over Temperature Protection (Self-recovery)
All models can be used in DPA or IBA. This series which conform to the RoHS6
 Remote ON/OFF Control
requirement are suitable for telecom devices, server, network and industry
devices power supply
 Remote Sense
 Output Voltage Trim
 Monotonic Start-Up Into Pre-Biased Outputs *
 Meet UL94V-0 flammability requirements
 Size: 2.0 x 0.5 x 0.33 Inches (POL16-05)
2.0 x 0.55 x 0.47 Inches (others Model)
 3-Years Product Warranty
*POL10-05 and POL16-12 without this function
**POL16-05 without this function
ELECTRICAL SPECIFICATIONS
Conditions: TA = -40 - 85°C, Vin = 4.5 - 5.5 / 3 - 5.5V / 10 - 14 VDC, Vout = 3.3 / 0.75 – 3.3 / 0.85 - 5 V DC, unless otherwise notes.
Model No.
Input
Output
Voltage (V.DC.) (max.) (Continuous)
Operating Voltage (V.DC.)
Current (A) (max)
No-Load Loss (W) (typ.)
Voltage Set Point (V.DC.) (typ.)
Voltage Trim Range (V.DC.)
Current (A) (max.)
Line Regulation (LL-HL) (typ.)
Load Regulation (0-100%) (typ.)
Ripple & Noise (peak to peak) (typ.)
(Oscilloscope Bandwidth:20 MHz)
Efficiency (typ.)
Over Power Protection
Over Current Protection
Over Voltage Protection
Protection
Short Circuit Protection (max.)
Over Temperature Protection
POL10-05
6V
5V (4.5~5.5V)
10A
0.3W
3.3V
3.2~3.4V
10A
1%
1%
POL16-05
5.8V
3.3V (3~5.5V)
23A
0.2W
3.3V
0.75~3.3V
16A
POL16-12
16V
12V (10~14V)
18A
0.7W
1.2V
0.85~5V
16A
1.5%
70 mV
50 mV
2%
<3.3V:50 mV
≧3.3V: 75 mV
0.85Vout: 80%
1.0Vout: 83%
1.2Vout: 84%
1.5Vout: 86%
1.8Vout: 87.5%
2.5Vout: 88%
3.3Vout: 90.5%
5.0Vout: 92%
95%
0.9Vout:
1.0Vout:
1.2Vout:
1.5Vout:
1.8Vout:
2.5Vout:
3.3Vout:
85%
86%
87.5%
89.5%
91%
93%
94.5%
Hiccup mode
Hiccup mode
105~130%
105~130%
─
(Self-recovery)
(Self-recovery)
Hiccup mode
Threshold:125°C / Hysteresis:5°C (typ.)
Self-recovery (The values are obtained by measuring the temperature of the PCB bottom near
the thermal resistor.)
Environment
Physical
Other
Operating Temperature
Storage Temperature
Temperature Coefficient (max.)
(TA = -40°C to +85°C (-40°F to +185°F ))
Humidity
MTBF
Dimension (L x W x H)
Tolerance 0.5 mm
Weight
Remote
On/Off Voltage
http://www.archcorp.com.tw
TEL: +886-2-26989508 FAX: +886-2-26981319
Low level (V.DC.)
High level (V.DC.)
-40°C…+85°C
-55°C…+125°C
0.02 % Vout / °C
0.5 % Vout / °C
0.02 % Vout / °C
95% RH
1.5 Million Hours
(Telcordia SR332; Vin = 5 / 3.3 / 12 V; 80% load; Airflow = 1.5 m/s (300
FLM); TA = 40°C (104°F)
POL16-05: 2.0 x 0.5 x 0.33 Inches ( 50.8 x 12.7 x 8.4 mm )
others:
2.0 x 0.55 x 0.47 Inches ( 50.8 x 14.0 x 12.0 mm )
6g
-0.2~0.5V
0.4V (max.)
-0.2~0.5V
2.0~5.0V
1.5~5.8V
2.0~5.0V
-1-
VER : A_0
update : 2014.04.25
DC-DC Brick
POL10/16 SERIES
10/16 A
NOTE
1. During the test of input reflected ripple current, the input terminal must be connected to a 12 uH inductor and a 220 uF electrolytic capacitor.
2. Point A, which is for testing the output voltage ripple, is 25 mm (0.98 in.) away from the Vout pin.
3. The test platform is a 1oz four-layer board with the dimensions (L x W) being 100 mm x 50 mm (3.94 in. x 1.97 in.).
DERATING
http://www.archcorp.com.tw
TEL: +886-2-26989508 FAX: +886-2-26981319
-2-
VER : A_0
update : 2014.04.25
DC-DC Brick
POL10/16 SERIES
10/16 A
MECHANICAL DIMENSION
PIN#
Single
1
DC OUT
2
DC OUT
3
Sense
4
DC OUT
5
GND
6
GND
7
DC IN
8
DC IN
10
Trim
11
ON/OFF
Note
1. All dimensions in mm [in.]
Tolerances: x.x ± 0.5 mm [x.xx ± 0.02 in.]
x.xx± 0.25 mm [x.xxx ± 0.010 in.]
2. Tolerances for the lengths, widths of all pins are x.xx ± 0.10 mm [x.xxx ±0.004 in.]
http://www.archcorp.com.tw
TEL: +886-2-26989508 FAX: +886-2-26981319
-3-