FL Switch SFNB 5(8)TX

FL SWITCH SFNB…
Five- and Eight-Port Standard Function Ethernet
Switch with Narrow Housing
AUTOMATION
Data Sheet
2642_en_H
1
© PHOENIX CONTACT 2011-07-10
Description
The FL SWITCH SFNB… Factoryline switches can be used
for quick and cost-effective Ethernet network expansion to
the field level. Due to the narrow housing design, the
switches are suitable for use in control cabinets and junction
boxes. The switch supports the auto negotiation function
and offers transmission speeds of 10/100 Mbps across
RJ45 ports and 100 Mbps across fiber optic ports. Mixed
operation for the connection of segments with different data
transmission speeds is also supported.
The RJ45 ports offer an autocrossing function, which means
it is not necessary to make a distinction between 1:1 and
crossover cables.
2
–
–
–
Switches are available with either SC or ST multi-mode fiber
optic ports. For longer distance, a single-mode fiber optic
switch extends the segment to 20 km typical.
–
–
Features and Benefits
Increased network performance
– Switched Ethernet networks reduce traffic and nonpredictable timing
Easy network expansion
– No configuration of the switch
– Auto-negotiation and autocross simplify cabling
– Couple copper network segments with different bit
rates with automatic detection of the data
transmission speed of 10 or 100 Mbps.
Easy maintenance
– Individual LEDs at each port indicate
communication activity and data rate
– Removable power connector
– Internal, resettable fuse
– NS 35 DIN rail (EN 60715) compatible
Fiber optic ports extend distance and provide electrical
noise immunity
– SC multi-mode, SC single-mode and ST multimode versions available
Industrial rated
– Rugged metal housing for industrial applications
– -10 to 60°C operating range
– Meets IEC 61000-6-2 electrical noise immunity
– Meets IEC 60068-2-6 vibration test standards
– Meets IEC 60068-2-27 shock test standards
Make sure you always use the latest documentation.
It can be downloaded at www.phoenixcontact.net/catalog.
This data sheet is valid for all products listed on the following page:
FL SWITCH SFNB…
3
Ordering Data
Description
Type
Order No.
Pcs./Pkt.
Ethernet switch with 5 RJ45 ports
FL SWITCH SFNB 5TX
2891001
1
1
Ethernet switch with 8 RJ45 ports
FL SWITCH SFNB 8TX
2891002
Ethernet switch with 4 RJ45 ports and 1 SC format fiber optic port
FL SWITCH SFNB 4TX/FX
2891027
1
Ethernet switch with 4 RJ45 ports and 1 ST format fiber optic port
FL SWITCH SFNB 4TX/FX ST
2891028
1
Ethernet switch with 4 RJ45 ports and 1 SC format single-mode
fiber optic port
FL SWITCH SFNB 4TX/FX SM20
2891029
1
Accessories
Description
Type
Order No.
Pcs./Pkt.
Universal end clamp
E/NS 35 N
0800886
50
Patch angle with 2 ports in CAT 5e
FL PF 2TX CAT5E
2891165
1
Patch angle with 8 ports in CAT 5e
FL PF 8TX CAT5E
2891178
1
Patch angle with 2 ports in CAT 6
FL PF 2TX CAT6
2891068
1
Patch angle with 8 ports in CAT 6
FL PF 8TX CAT6
2891071
1
Patch angle with security elements for 2 ports in CAT 5e
FL PF SEC 2TX
2832687
1
Patch angle with security elements for 8 ports in CAT 5e
FL PF SEC 8TX
2832690
1
Patchbox 8 x RJ45 CAT 5e, pre-assembled, can be retrofitted
FL PBX 8TX
2832496
1
Patch cable, CAT 5, pre-assembled, 0.3 m long
FL CAT5 PATCH 0,3
2832250
10
Patch cable, CAT 5, pre-assembled, 0.5 m long
FL CAT5 PATCH 0,5
2832263
10
Patch cable, CAT 5, pre-assembled, 1.0 m long
FL CAT5 PATCH 1,0
2832276
10
Patch cable, CAT 5, pre-assembled, 1.5 m long
FL CAT5 PATCH 1,5
2832221
10
Patch cable, CAT 5, pre-assembled, 2.0 m long
FL CAT5 PATCH 2,0
2832289
10
Patch cable, CAT 5, pre-assembled, 3.0 m long
FL CAT5 PATCH 3,0
2832292
10
Patch cable, CAT 5, pre-assembled, 5.0 m long
FL CAT5 PATCH 5,0
2832580
10
Patch cable, CAT 5, pre-assembled, 7.5 m long
FL CAT5 PATCH 7,5
2832616
10
Patch cable, CAT 5, pre-assembled, 10.0 m long
FL CAT5 PATCH 10
2832629
10
Lockable security element for FL PATCH…
FL PATCH GUARD
2891424
20
Key for FL PATCH GUARD
FL PATCH GUARD KEY
2891521
1
Color marker for FL PATCH GUARD, black
FL PATCH GUARD CCODE BK
2891136
12
Color marker for FL PATCH GUARD, blue
FL PATCH GUARD CCODE BU
2891233
12
Color marker for FL PATCH GUARD, orange
FL PATCH GUARD CCODE OG
2891330
12
Color marker for FL PATCH GUARD, yellow
FL PATCH GUARD CCODE YE
2891437
12
Color marker for FL PATCH GUARD, turquoise
FL PATCH GUARD CCODE TQ
2891534
12
Color marker for FL PATCH GUARD, green
FL PATCH GUARD CCODE GN
2891631
12
Color marker for FL PATCH GUARD, red
FL PATCH GUARD CCODE RD
2891738
12
Color marker for FL PATCH GUARD, violet
FL PATCH GUARD CCODE VT
2891835
12
2642_en_H
PHOENIX CONTACT
2
FL SWITCH SFNB…
4
Technical Data
General Data
Function
Switch/repeater; conforms to standard IEEE 802.3
Latency of the communication processor
FL SWITCH SFNB 5(4)TX…
FL SWITCH SFNB 8TX
8 µs plus frame time
9 µs plus frame time
Housing dimensions (width x height x depth)
FL SWITCH SFNB 5(4)TX…
FL SWITCH SFNB 8TX
28 x 110 x 70 mm
50 x 110 x 70 mm
Weight
FL SWITCH SFNB 5(4)TX…
FL SWITCH SFNB 8TX
205 g
291 g
Operating temperature
All models except FL SWITCH SFNB 4TX/FX
FL SWITCH SFNB 4TX/FX
Storage temperature
-10°C … 60°C
0°C … 60°C
-20°C … 85°C
Degree of protection
IP20, DIN 40050, IEC 60529
Protection class
Class 3 VDE 0106; IEC 60536
Humidity (operation and storage)
5% to 95%, no condensation
Air pressure (operation)
86 kPa to 108 kPa, 1500 m above sea level
Air pressure (storage)
66 kPa to 108 kPa, 3500 m above sea level
Mounting rail
NS 35 (EN 60715)
Preferred mounting position
Perpendicular to a standard mounting rail
Connection to protective earth ground
Snapped onto a grounded mounting rail
Supply Voltage (US)
Connection type
Removable, screw-clamp connector
Wire size (solid/stranded/AWG)
0.2 to 2.5 mm² / 0.2 to 2.5 mm² / 24 to 12 AWG
Recommended PE wire size
2.5 mm2
Nominal power supply
24 V DC
Permissible ripple
3.6 Vpp within the permissible voltage range
Permissible voltage range
FL SWITCH SFNB 5(4)TX…
FL SWITCH SFNB 8TX
12 V DC …48 V DC
9 V DC …32 V DC
Current consumption, nominal
FL SWITCH SFNB 5TX
FL SWITCH SFNB 8TX
FL SWITCH SFNB 4TX/FX
FL SWITCH SFNB 4TX/FX ST
FL SWITCH SFNB 4TX/FS SM20
180 mA@24 V DC; 340 mA@12 V DC
138 mA@24 V DC; 272 mA@12 V DC
185 mA@24 V DC; 385 mA@12 V DC
185 mA@24 V DC; 385 mA@12 V DC
185 mA@24 V DC; 385 mA@12 V DC
Inrush current maximum
FL SWITCH SFNB 5TX
FL SWITCH SFNB 8TX
FL SWITCH SFNB 4TX/FX
FL SWITCH SFNB 4TX/FX ST
FL SWITCH SFNB 4TX/FX SM20
15 A for 35 µs
9.1 A for 40 µs
7.2 A for 80 µs
7.7 A for 80 µs
7.7 A for 80 µs
Test voltage
500 V DC for one minute
Protection against polarity reversal
Present
Interfaces
Total number of Ethernet interfaces (RJ45)
FL SWITCH SFNB 5TX
FL SWITCH SFNB 8TX
FL SWITCH SFNB 4TX…
MAC Address Table Size (Entries)
5
8
4
2K
Properties of RJ45 Ports
Connection format
2642_en_H
8-pos. RJ45 female connector on the switch
PHOENIX CONTACT
3
FL SWITCH SFNB…
Interfaces (Continued)
Connection medium
Twisted-pair cable with a conductor cross section of 0.14 mm2 to 0.22 mm2
Cable impedance
100 Ω
Transmission speed
10/100 Mbps
Maximum network segment length
100 m
Properties of Fiber Optic Ports
Connection format
SC duplex or ST female connector
Fiber type
Glass
Laser protection
Class 1 according to DIN EN 60825-1:2001-11
Properties of 100 Mbps Multimode
Transmission rate
100 Mbps full duplex
Wavelength
1300/1310 nm
Fiber optic segment length
12.1 km with glass fiber 62.5/125 0.7 dB/km F1000
3.3 km with glass fiber 62.5/125 2.6 dB/km F600
7.1 km glass fiber with F-G 50/125 0.7 dB/km F1200
3.1 km glass fiber with F-G 50/125 1.6 dB/km F800
Transmission power (medium type) dynamic (average)
Minimum
Maximum
-23.5 dBm (50/125 µm) / -20 dBm (62.5/125 µm)
-14 dBm (50/125 µm) / -14 dBm (62.5/125 µm)
Transmission power (medium type) static
Minimum
Maximum
-22.5 dBm (50/125 µm) / -19 dBm (62.5/125 µm)
-14 dBm (50/125 µm) / -14 dBm (62.5/125 µm)
Receiver sensitivity
Minimum
Maximum
-31 dBm (dynamic) / -31 dBm (static)
-14 dBm (dynamic) / -14 dBm (static)
Properties of 100 Mbps single mode
Transmission rate
100 Mbps full duplex
Fiber type
9/125 µm
Wavelength
1310 nm
Maximum transmission length
25 km with glass fiber 9/125 µm 0.5 dB/km
Transmission power
Minimum
Maximum
-15 dBm
-3 dBm
Receiver sensitivity
Minimum
Maximum
-32 dBm
-3 dBm
Mechanical Tests
Shock test according to IEC 60068-2-27
Operation: 25g, 11 ms period, half-sine shock pulse
Storage/transport: 50g, 11 ms period, half-sine shock pulse
Vibration resistance according to IEC 60068-2-6
Operation/storage/transport: 5g, 150 Hz, Criterion 3
Free fall according to IEC 60068-2-32
1m
Conformance With EMC Directives
Developed according to IEC 61000-6-2
IEC 61000-4-2 (ESD)
Contact: ±4 kV, Criterion B
Air: ±8 kV, Criterion B
IEC 61000-4-3 (radiated-noise immunity)
10 V/m, Criterion A
IEC 61000-4-4 (burst)
Ports: ±1 kV, Criterion B
DC power: ±2 kV, Criterion B
IEC 61000-4-5 (surge)
Ports: ±1 kV, Criterion B
DC power: ±500 V, Criterion B
IEC 61000-4-6 (conducted noise immunity)
10 V/m, Criterion A
IEC 61000-4-8 (noise immunity against magnetic fields)
30 A/m, Criterion A
EN 55022 (noise emission)
Class A
2642_en_H
PHOENIX CONTACT
4
FL SWITCH SFNB…
Approvals
c u ROHS EEE 2002/95/EC, WEEE 2002/96/EC
U Class 1, Division 2, Groups A, B, C, D Temp Code T5
General
Hazardous location
installed in minimum IP54 enclosure
5
Overview
5.1
1
FL SWITCH SFNB 5TX
Ord.No.2891001
US
1
Des.
Color
Status
US
Green
ON
Supply voltage US in the
tolerance range
OFF
Supply voltage US too
low
2
2
US
K/
LN
T
AC
Diagnostic and Status Indicators
3
X1
0
10
K/
LN
T
AC
4
X2
0
10
K/
LN
T
AC
X3
10
0
K/
LN
T
AC
X4
10
0
K/
LN
T
AC
K/
LN
T
AC
K/
LN
T
AC
X1
X2
0
10
K/
LN
T
AC
0
10
K/
LN
T
AC
X3
X4
10
0
1
2
3
4
Figure 1
2642_en_H
10
0
K/
LN
T
AC
K/
LN
T
AC
X5
X6
K/
LN
T
AC
0
10
K/
LN
T
AC
X7
X8
10
10
0
0
X5
10
Meaning
10
0
3
5.2
Data Transmission Speed LEDs (2 LEDs/Port)
4
10 Mbps
100 Mbps
LNK/ACT
ON/blinking
ON/blinking
100
OFF
ON
LNK/ACT LED:
ON: indicates an electrical link
Flashing: indicates network traffic (at high data
rates the blinking is in a constant rate)
0
Power connector
Power LED (US) - green
LNK/ACT LED - green
100 LED - yellow
Housing
PHOENIX CONTACT
5
FL SWITCH SFNB…
6
Installation
by an additional low-impedance connection to functional
earth ground (see Figure 2).
CAUTION:
– +
Only qualified personnel may start up and operate
this device. Qualified personnel are persons
authorized to start up, ground and mark devices,
systems, and equipment according to the
standards of safety technology.
GND US
NOTE:
NOTE:
Connect the mounting rail to protective earth
ground using a grounding terminal block. The
modules are grounded when they are snapped
onto the rail. Connect protective earth ground
with low impedance.
6.1
1.
2.
3.
6.2
1.
2.
3.
Assembly
Place the module onto the rail from above. The upper
holding keyway must be hooked onto the top edge of
the rail.
Push the module from the front towards the mounting
surface.
Once the module has been snapped on properly, check
that it is fixed securely on the rail.
X6
The FL SWITCH SFNB… module is designed for
SELV and PELV operation according to
IEC 61140/EN 61140.
Install the FL SWITCH SFNB… on a clean mounting rail. To
avoid contact resistance only use clean, corrosion-free
mounting rails that meet the EN 60715 standard. End
clamps can be mounted on both sides of the module to stop
the modules from slipping on the rail.
Figure 2
Power connections
Use power conductors between 0.2 - 2.5 mm²
(24 - 12 AWG). Torque connection screws to 0.5 - 0.6 Nm
(5 - 7 lb-in.).
6.4
Ethernet Interface
The FL SWITCH SFNB… has either five or eight Ethernet
ports on the front in RJ45 format to which only twisted-pair
cables with an impedance of 100 Ω can be connected. The
data transmission speed is 10/100 Mbps. In addition, every
port has an auto crossing function: it is not necessary to
make a distinction between 1:1 or crossover Ethernet
cables.
RJ45
Removal
Insert a suitable tool (e.g., needle-nose pliers) into the
arresting latch and pull it down.
Pull the module slightly away from the mounting
surface.
Lift the module from the rail.
8 7 6 5
4 3 2 1
n.c. TDn.c. RDn.c. n.c.
TD+ RD+
Figure 3
6.3
24 V DC
RJ45 pin assignment
Power Connection
The switch is designed for SELV and PELV operation at
+24 V DC according to IEC 61140/EN 61140. Only SELV
and PELV according to the defined standards may be used
for supply purposes.
Snapping the switch onto a grounded mounting rail
connects it to the ground potential. In an environment
particularly prone to EMI, noise immunity can be increased
2642_en_H
PHOENIX CONTACT
6
FL SWITCH SFNB…
Fiber Optic Connection
8
Two different types of fiber optic connection are available.
– The ST connectors are typically individual round
connectors and use a 1/4-turn connection.
– The SC connectors have a square interface and the
“conductors” are typically locked together through the
connector.
Dimensions
14 mm
FL SWITCH SFNB 5TX
Ord.No.2891001
US
US
K/
LN
T
AC
X1
0
10
K/
LN
T
AC
K/
LN
T
AC
K/
LN
T
AC
SC Connectors
ST Connectors
X6
X6
X2
100
100
K/
LN T
AC
TD
100
K/
LN T
AC
0
10
K/
LN
T
AC
TD
TD
X3
X5
X5
RD
RD
10
RD
0
/
K
LN
T
AC
X4
10
0
K/
LN
T
AC
K/
LN
T
AC
X1
X2
K/
LN
T
AC
0
10
K/
LN
T
AC
X3
X4
10
110 mm
6.5
0
K/
LN
T
AC
0
10
K/
LN
T
AC
X5
X6
10
0
LN
T
AC
0
10
K/
LN
T
AC
X7
X8
10
0
K/
Figure 4
Fiber optic ports
K/
LN
T
AC
10
0
10
0
X5
7
–
–
Switching Characteristics
Store and Forward
All data telegrams received by the switch are saved and
their validity checked. Invalid or faulty data packets
(> 1522 bytes or CRC errors) and fragments
(< 64 bytes) are rejected. Valid data telegrams are
forwarded by the switch. The switch always forwards
the data using the data transmission speed that is used
in the destination network segment.
Multi-Address Function
The switch independently learns the addresses for
termination devices, which are connected via a port, by
evaluating the source addresses in the data telegrams.
Only packets with unknown addresses, with a source
address of this port or with a multicast/broadcast
address in the destination address field are forwarded
via the corresponding port. The switch can store
addresses in its address table with an aging time of
5 minutes. This is important when more than one
termination device is connected to one or more ports. In
this way, several independent subnetworks can be
connected to one switch.
10
0
28 mm
50 mm
Depth = 70 mm
Figure 5
Housing dimensions
A restart deletes the entire address table.
2642_en_H
PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany • Phone: +49-(0) 5235-3-00
PHOENIX CONTACT • P.O. Box 4100 • Harrisburg • PA 17111-0100 • USA • Phone: +717-944-1300
www.phoenixcontact.com
7