CLAMP ON HiTESTER 3280-10/-20 Field measuring instruments Dual Action m .38") 9.5m (0 Actual-size Jaw ✓Slim body design ✓Easy clamping in narrow locations 2 Safe & Easy Operation! Features 3280-10/-20 3282 100g 16mm Light 39mm (1.54") , Slim (3.5 oz.) 400g (14.1oz.) (0.63" ) Right / Left hand ●Independent-opening double-lever design ●Slim body to allow easy clamping even for narrow conductors ●Eliminates magnetization-induced heat and noise, even in heavy-current measurement ●No metal (iron core) exposure, ensuring enhanced safety capability True RMS ● Test Lead Holder for convenient voltage measurement Prevents The 3280-20 performs accurate measurements of even small currents in the AC 42.00 A range. It also guarantees accuracy of True RMS measurements for frequencies from 40 Hz to 1 kHz. removable TEST LEADS HOLDER 9209 careless mistakes Current waveform of the switching power supply (primary side) (optional) ● Auto-power save No Fuse E S to conserve battery life FU ● PTC Protected (Non-fuse type) Required protects up to 250 V AC/DC MEAN value method 3280-10 True RMS method 3280-20 ●Crest factor: 2.5 max. (Applies to input of at least 60% of the range.) ■ 3280-10/-20 Specifications (accuracy at 23˚C±5˚C (73˚F±9˚F), 80% RH or less) Function Range (Accuracy) AC current (0.06 ) - 42.00 / 420.0 / 1000 A (50 to 60Hz: ±1.5%rdg.±5dgt. (3280-10)) (45 to 66Hz: ±1.5%rdg.±5dgt. (3280-20)) (40 to 45Hz or 66 to 1kHz: ±2.0%rdg.±5dgt. (3280-20)) DC voltage 420.0 m / 4.200 / 42.00 / 420.0 / 600 V (±1.3%rdg.±4dgt.) AC voltage 4.200 / 42.00 / 420.0 / 600 V Resistance 420.0 / 4.200 k / 42.00 k / 420.0k / 4.200 M / 42.00 MΩ (±2.0%rdg.±4dgt.*2) Continuity 420.0 Ω (±2.0%rdg.±6dgt.) (Buzzer sounds at approx 50 Ω or less ) (50 to 500 Hz) (open terminal voltage 3.4 V max.*1) (open terminal voltage 3.4 V max.) (±2.3%rdg.±8dgt.) *1. at 420 Ω. (4.2k 0.7V (typ.) 42k to 42M 0.5V (typ.) ) *2. at 420 to 420kΩ. (4.2MΩ ±5.0%rdg.±4dgt. 42MΩ ±10.0%rdg.±4dgt.) ●AC measurement: mean value ●Ancillary functions: auto ranging, data hold function, auto power save function, battery life warning function ● Display: Max.4199-count LCD ●Sampling rate: 2.5 times/sec (Fast), 1 times/3sec (Slow) ●Measurable conductor diameter: ø33mm (1.30") max. ●Maximum rated voltage to earth: CAT III 600 V (Current measurement section), CAT III 300 V, CAT II 600 V (Voltage measurement section) ●Max.input current: 2000 A rms cont. ●Max.input voltag: 600 V rms ●Effect of conductor position: within ±5.0 % in any direction from the center of sensor ●Overload protection: DCV/ACV - 600 V DC /AC rms; ohms/continuity - 250 V AC rms ●Applicable standards: Safety - EN61010, CAT III 600V(AC A), CAT III 300V, CAT II 600V(AC/DC V) Type A current sensor, UL 61010B ; EMC - EN61326●Drop-proof: 3280-10/-20 can with-stand a 1m drop onto a concrete floor ●Location for use: Indoors, altitude up to 2000 m ●Ambient temperature of use: 0 to 40˚C(32˚F to 104˚F), 80%rh (no condensation) ●Storage temperature range: -10 to 50˚C (14˚F to 122˚F), (no condensation) ●Power source: CR2032 battery✕1 (3V DC) ●Continuous operating time: approx. 150 hours (3280-10), 50 hours (3280-20) ●Dimensions and mass: Approx. 57 W✕175 H✕16 D mm, 100 g (Approx 2.2" (W )✕ 6.9" (H)✕ 0.6" (D), 3.5 oz.) ●Accessories: battery, carrying case, test leads and manual WARNING Inspect the unit and check that it is operating correctly before use. When carrying out measurement on live lines, wear proper protective gear, insulating rubber gloves, insulating rubber boots and safety helmet, and use extreme caution to avoid electric shock accidents. DANGER In order to prevent short-circuits and injury, use the clamp product on electrical circuits with a voltage less than the maximum operation circuit oltage. ●Options TEST LEAD HOLDER 9209 Includes TEST LEAD 9208 and CARRYING CASE 9398 HIOKI (Shanghai) Sales & Trading Co., Ltd. : 1608-1610 Shanghai Times Square Office, 93 Huai Hai Zhong Road, Shanghai, P.R.China POSTCODE: 200021 TEL +86-21-6391-0090/0092 FAX +86-21-6391-0360 E-mail: [email protected] HEAD OFFICE : 81 Koizumi, Ueda, Nagano, 386-1192, Japan TEL +81-268-28-0562 / FAX +81-268-28-0568 E-mail: [email protected] HIOKI USA CORPORATION : 6 Corporate Drive, Cranbury, NJ 08512 USA TEL +1-609-409-9109 / FAX +1-609-409-9108 E-mail: [email protected] DISTRIBUTED BY Beijing Office : A-2602 Freetown, 58 Dong San Huan Nan Road Beijing, P.R.China POSTCODE: 100022 TEL +86-10-5867-4080/4081 FAX +86-10-5867-4090 E-mail: [email protected] Guangzhou Office : Room A-3206, Victory PlazaServices Center, No.103, Tiyuxi Road, Guangzhou, P.R.China POSTCODE:510620 TEL +86-20-38392673/2676 FAX +86-20-38392679 E-mail: [email protected] All information correct as of Jun. 30, 2009. All specifications are subject to change without notice. 3280sE6-96E-08U Printed in Japan