CERTIFICATE

CERTIFICATE
No. P15219385
Order No. 278135
Page 1/13
Product
Optocouplers
Applicant
Everlight Electronics Co., Ltd.
No.6-8, Zhonghua Rd., Shulin Dist., New Taipei City
23860
Taiwan
Manufacturer
Everlight Electronics Co., Ltd.
No.6-8, Zhonghua Rd., Shulin Dist., New Taipei City
23860
Taiwan
Factory
Everlight Electronics (China) Co., Ltd.
No. 2135 Zhong Shan North Rd. Wujiang Economy
Development Zone (Yun Xi Area), Songling Town,
Wujiang City, Jiang Su
China
See next page(s)
Ratings
250Vrms
Trade mark
EVERLIGHT
Model / Type Ref.
EL817./EL816./EL819./EL829./EL826./EL827./
EL717./4N25./4N26./4N27./4N28./4N35./4N36./4N37./4N38./MCT2./MCT2E./
MCT210./CNY17-1./CNY17-2./CNY17-3./CNY17-4./MOC8111./MOC8112./
MOC8113./H11A1./H11A2./H11A3./H11A4./H11A5./TIL111./TIL117/CNX35U.
Principal characteristics
Optocoupler. Minimum external creepage distance is measured to 7.7mm,
minimum internal creepage distance is measured to 6.0mm and minimum
distance through insulation is measured to 0.5mm. Tested for reinforced
insulation. Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h
in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test
a humidity test for 48h in 93% relative humidity. Electric strength test between
input and output 4800Vac/1 minute. The symbol "." in type designation may be
blank, A~Z or numbers, and denote different pin shape. Maximum operating
temperature: 110ºC.Tested for 5000m.
See next page(s)
A sample of the product was tested
and found to be in conformity with
TRON
OFF
LITE
HOUS
EN 60065:2002;A1;A11;A2;A12
IEC 60065(ed.7);am1;am2
EN 60950-1:2006;A11;A1;A12;A2
IEC 60950-1(ed.2);am1;am2
EN 62368-1:2014
IEC 62368-1(ed.2)
EN 61347-1:2008;A1;A2
IEC 61347-1(ed.2);am1;am2
EN 60335-1:2012;A11
IEC 60335-1(ed.5);am1
Date of issue 09-02-2015
Nastaran Vadoodi
Certification Department
Nemko AS
Gaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, Norway
TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected]
ENTERPRISE NUMBER NO974404532
nemko.com
CERTIFICATE
No. P15219385
Order No. 278135
Page 2/13
Validity
This certificate documents conformity with the standards shown, and also applies as license for
use of Nemkos name and certification mark. The certificate and license is valid as long as the
applicable conditions are complied with, and provided that any changes to the product are notified
to Nemko for acceptance prior to implementation.
New standards or amendments to the standards may imply that the product design must be
updated and/or that re-testing and re-certification is necessary.
Additional information
This certificate replaces certificates P13217249/A1, P11214765/A5,
P11214766/A4 and P11214503/A4, due to new Test Report has been issued.
See next page(s)
Additional model(s)
See next page(s)
Date of issue 09-02-2015
Nastaran Vadoodi
Certification Department
Nemko AS
Gaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, Norway
TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected]
ENTERPRISE NUMBER NO974404532
nemko.com
CERTIFICATE
No. P15219385
Order No. 278135
Page 3/13
Product
Pos. No
Model / Type Ref.
Trade mark (if different from page 1)
Optocouplers
1
EL451./EL452.
Rating
Principal characteristics
250Vrms
Optocoupler. Minimum external creepage distance is measured to 5.0mm,
minimum internal creepage distance is measured to 4.0mm and minimum
distance through insulation is measured to 0.4mm. Tested for reinforced
insulation. Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree
C, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. After the
cycling test a humidity test for 48h in 93% relative humidity. Electric strength
test between input and output 4800Vac/1 minute. The symbol “.” in type
designation may be blank, A~Z or numbers, and denote different pin shape.
Maximum operating temperature: 110°C. The symbol “X” in type denotes X
= Part no. (0,1,2,3,4).
Product
Pos. No
Model / Type Ref.
Optocouplers
2
ELD3H5./ ELD3H6./ ELD3H7./ ELD3H4./ ELQ3H4./ ELQ3H5./ ELQ3H7./
ELM314.
Trade mark (if different from page 1)
Rating
Principal characteristics
250Vrms
Optocoupler. Minimum external creepage distance is measured to 5.0mm,
minimum internal creepage distance is measured to 4.0mm and minimum
distance through insulation is measured to 0.4mm. Tested for reinforced
insulation. Maximum operating temperature: 110°C. Thermal cycling test, 10
cycles. Each cycle: 68h in 110 degree C, 1h in 25 degree C, 2h in 0 degree
C and 1h in 25 degree C. After the cycling test a humidity test for 48h in 93%
relative humidity. Electric strength test between input and output 4800Vac/1
minute. The symbol "." in type designation may be blank, A~Z or numbers,
and denote different pin shape.
Date of issue 09-02-2015
Nastaran Vadoodi
Certification Department
Nemko AS
Gaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, Norway
TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected]
ENTERPRISE NUMBER NO974404532
nemko.com
CERTIFICATE
No. P15219385
Order No. 278135
Product
Pos. No
Model / Type Ref.
Page 4/13
Optocouplers
3
ELM452./ ELM453./ ELM600./ ELM601./ ELM611./ ELM452L./ ELM453L./
ELM600L./ ELM601L./ ELM611L./ELM454.
Trade mark (if different from page 1)
Rating
Principal characteristics
250Vrms
High Speed Optocoupler. Minimum external creepage distance is measured
to 5.0mm, minimum internal creepage distance is measured to 4.0mm and
minimum distance through insulation is measured to 0.4mm. Tested for
reinforced insulation. Maximum operating temperature: 100°C. Thermal
cycling test, 10 cycles. Each cycle: 68h in 100 degree C, 1h in 25 degree
C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test a humidity
test for 48h in 93% relative humidity. Electric strength test between input and
output 4800Vac/1 minute. The symbol "." in type designation may be blank,
A~Z or numbers, and denote different pin shape.
Product
Pos. No
Model / Type Ref.
Optocouplers
4
ELD851./ELD852./4N29./4N30./4N31./4N32./4N33./H11B1./H11B2./H11B3./
H11B255./TIL113./MOC119./MOC8020./MOC8021./MOC8030./MOC8050./
MOC8080./EL301X./EL302X./EL305X./EL307X./EL303X./EL304X./EL306X./
EL308X./EL3161./EL3162./EL3163./H11L1./H11L2.
Trade mark (if different from page 1)
Rating
Principal characteristics
250Vrms
Optocoupler. Minimum external creepage distance is measured to 7.7mm,
minimum internal creepage distance is measured to 5.5mm and minimum
distance through insulation is measured to 0.5mm.Tested for reinforced
insulation. Thermal cycling test, 10 cycles. Each cycle: 68h in 100 degree
C, 1h in 25degree C, 2h in 0 degree C and 1h in 25 degree C. After the
cycling test a humidity test for 48h in 93% relative humidity. Electric strength
test between input and output 4800Vac/1 minute. The symbol “.” in type
designation may be blank, A~Z or numbers, and denote different pin shape.
Maximum operating temperature: 100°C. The symbol “X” in type denotes X
= Part no. (0,1,2,3,4).
Date of issue 09-02-2015
Nastaran Vadoodi
Certification Department
Nemko AS
Gaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, Norway
TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected]
ENTERPRISE NUMBER NO974404532
nemko.com
CERTIFICATE
No. P15219385
Order No. 278135
Product
Pos. No
Model / Type Ref.
Page 5/13
Optocouplers
5
ELR3602./ELR3603./ELR2602./ELR2603./ELR1602./ELR1603./ELR3502./
ELR3503./ELR2502./ELR2503./ELR1502./ELR1503.
Trade mark (if different from page 1)
Rating
Principal characteristics
250Vrms
Power Triac Optocoupler. Minimum external creepage distance is measured
to 8.2mm, minimum internal creepage distance is measured to 5.1mm and
minimum distance through insulation is measured to 0.5mm. Tested for
reinforced insulation. Thermal cycling test, 10 cycles. Each cycle: 68h in
100 degree C, 1h in 25degree C, 2h in 0 degree C and 1h in 25 degree C.
After the cycling test a humidity test for 48h in 93% relative humidity. Electric
strength tests, between input and output 4800Vac/1 minute. The symbol “.”
in type designation may be blank, A~Z or numbers, and denote different pin
shape. Maximum operating temperature: 100°C
Product
Pos. No
Model / Type Ref.
Optocouplers
6
EL2801./EL354./EL355./EL356./EL357./EL359./EL121./EL124./EL2701./
EL2705./EL357N./EL356N./EL121N./EL124N./EL2701N./EL354N./
EL2705N./EL3H7./EL281./EL3H4./EL280./EL3H71./ELM301X./ELM302X./
ELM305X./ELM307X./ELM303X./ELM304X./ELM306X./ELM308X.
Trade mark (if different from page 1)
Rating
Principal characteristics
250Vrms
Optocoupler. Minimum external creepage distance is measured to 5.0mm,
minimum internal creepage distance is measured to 4.0mm and minimum
distance through insulation is measured to 0.4mm. Tested for reinforced
insulation. Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree
C, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. After the
cycling test a humidity test for 48h in 93% relative humidity. Electric strength
test between input and output 4800Vac/1 minute. The symbol “.” in type
designation may be blank, A~Z or numbers, and denote different pin shape.
Maximum operating temperature: 110°C. The symbol “X” in type denotes X
= Part no. (0,1,2,3,4).
Date of issue 09-02-2015
Nastaran Vadoodi
Certification Department
Nemko AS
Gaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, Norway
TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected]
ENTERPRISE NUMBER NO974404532
nemko.com
CERTIFICATE
No. P15219385
Order No. 278135
Page 6/13
Product
Pos. No
Model / Type Ref.
Trade mark (if different from page 1)
Optocouplers
7
EL847./EL844./EL845.
Rating
Principal characteristics
250Vrms
Optocoupler. Minimum external creepage distance is measured to 8.0mm,
minimum internal creepage distance is measured to 5.1mm and minimum
distance through insulation is measured to 0.5mm. Tested for reinforced
insulation. Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree
C, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. After the
cycling test a humidity test for 48h in 93% relative humidity. Electric strength
tests, between input and output 4800Vac/1 minute. The symbol "." in type
designation may be A to Z, numbers or blank, denote different pin shape.
Maximum operating temperature: 110°C
Product
Pos. No
Model / Type Ref.
Trade mark (if different from page 1)
Optocouplers
8
EL815./ EL814./EL824./ EL825.
Rating
Principal characteristics
250Vrms
Optocoupler. Minimum external creepage distance is measured to 7.9mm,
minimum internal creepage distance is measured to 6.0mm and minimum
distance through insulation is measured to 0.5mm. Tested for reinforced
insulation. Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree
C, 1h in 25degree C, 2h in 0 degree C and 1h in 25 degree C. After the
cycling test a humidity test for 48h in 93% relative humidity. Electric strength
test between input and output 4800Vac/1 minute. The symbol “.” in type
designation may be blank, A~Z or numbers, and denote different pin shape.
Maximum operating temperature: 110º
Date of issue 09-02-2015
Nastaran Vadoodi
Certification Department
Nemko AS
Gaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, Norway
TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected]
ENTERPRISE NUMBER NO974404532
nemko.com
CERTIFICATE
No. P15219385
Order No. 278135
Page 7/13
Product
Pos. No
Model / Type Ref.
Trade mark (if different from page 1)
Optocouplers
9
EL101X./ EL357L./ EL355L./ EL354L./ EL111X./ EL161X./ EL151X.
Rating
Principal characteristics
250Vrms
Optocoupler. Minimum external creepage distance is measured to 8.1mm,
minimum internal creepage distance is measured to 5.2mm and minimum
distance through insulation is measured to 0.4mm. Tested for reinforced
insulation. Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree
C, 1h in 25degree C, 2h in 0 degree C and 1h in 25 degree C. After the
cycling test a humidity test for 48h in 93% relative humidity. Electric strength
test between input and output 4800Vac/1 minute. The symbol “.” in type
designation may be blank, A~Z or numbers, and denote different pin shape.
Maximum operating temperature: 110°C. The symbol “X” in type denotes X
= Part no. (0,1,2,3,4,5,6,7,8,9).Tested for 5000m.
Product
Pos. No
Model / Type Ref.
Optocouplers
10
EL205./EL206./EL207./EL208./EL211./EL212./EL213./EL215./EL216./
EL217./ELD207./ELD208./ELD213./ELD217./ELD205./ELD206./ELD211.
Trade mark (if different from page 1)
Rating
Principal characteristics
250Vrms
Optocoupler. Minimum external creepage distance is measured to 4.4mm,
minimum internal creepage distance is measured to 3.5mm and minimum
distance through insulation is measured to 0.4mm. Tested for basic and
supplementary insulation. Thermal cycling test, 10 cycles. Each cycle: 68h in
110 degree C, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C.
After the cycling test a humidity test for 48h in 93% relative humidity. Electric
strength test between input and output 2400Vac/1 minute. The symbol “.” in
type designation may be blank, A~Z or numbers, and denote different pin
shape. Maximum operating temperature: 110°C
Date of issue 09-02-2015
Nastaran Vadoodi
Certification Department
Nemko AS
Gaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, Norway
TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected]
ENTERPRISE NUMBER NO974404532
nemko.com
CERTIFICATE
No. P15219385
Order No. 278135
Product
Pos. No
Model / Type Ref.
Page 8/13
Optocouplers
11
6N135./6N136./6N137./6N138./6N139./EL2502./EL250L./EL2503./EL4502./
EL4503./EL2530./EL253L./EL2531./EL4534./EL2730./EL2731./EL2601./
EL260L./EL2611./EL261A./EL261N./EL2630./EL263L./EL263A./EL263N./
EL2631./EL4661./EL4504.
Trade mark (if different from page 1)
Rating
Principal characteristics
250Vrms
High Speed Optocoupler. Minimum external creepage distance is measured
to 8.0mm, minimum internal creepage distance is measured to 5.0mm and
minimum distance through insulation is measured to 0.5mm.Tested for
reinforced insulation. Thermal cycling test, 10 cycles. Each cycle: 68h in
100 degree C, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C.
After the cycling test a humidity test for 48h in 93% relative humidity. Electric
strength test between input and output 4800Vac/1 minute. The symbol “.” in
type designation may be blank, A~Z or numbers, and denote different pin
shape. Maximum operating temperature: 100°C.
Product
Pos. No
Model / Type Ref.
Optocouplers
12
H11L3./H11D1./H11D2./H11D3./H11D4./H11G1./H11G2./EL371./
EL725./4N50./4N51./4N52./4N53./4N54./4N55./4N56./4N57./4N58./4N59./
EL852./EL851./H11G3.
Trade mark (if different from page 1)
Rating
Principal characteristics
250Vrms
Optocoupler. Minimum external creepage distance is measured to 7.7mm,
minimum internal creepage distance is measured to 5.5mm and minimum
distance through insulation is measured to 0.5mm.Tested for reinforced
insulation. Thermal cycling test, 10 cycles. Each cycle: 68h in 100 degree
C, 1h in 25degree C, 2h in 0 degree C and 1h in 25 degree C. After the
cycling test a humidity test for 48h in 93% relative humidity. Electric strength
test between input and output 4800Vac/1 minute. The symbol “.” in type
designation may be blank, A~Z or numbers, and denote different pin shape.
Maximum operating temperature: 100°C. The symbol “X” in type denotes X
= Part no. (0,1,2,3,4).
Date of issue 09-02-2015
Nastaran Vadoodi
Certification Department
Nemko AS
Gaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, Norway
TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected]
ENTERPRISE NUMBER NO974404532
nemko.com
CERTIFICATE
No. P15219385
Order No. 278135
Product
Pos. No
Model / Type Ref.
Page 9/13
Optocouplers
13
EL0500./EL0501./EL0452./EL0453./EL0454./EL0600./EL0601./EL0611./
EL0700./EL050L./EL060L./EL0701./EL061A./EL061N./EL0551./EL0530./
EL0531./EL0533./EL063X./EL0661./EL0730./EL0731./EL053L.
Trade mark (if different from page 1)
Rating
Principal characteristics
250Vrms
High Speed Optocoupler . Minimum external creepage distance is measured
to 4.4mm, minimum internal creepage distance is measured to 3.5mm and
minimum distance through insulation is measured to 0.4mm. Tested for
basic and supplementary insulation. Thermal cycling test, 10 cycles. Each
cycle: 68h in 100 degree C, 1h in 25degree C, 2h in 0 degree C and 1h in
25 degree C. After the cycling test a humidity test for 48h in 93% relative
humidity. Electric strength test between input and output 2400Vac/1 minute.
The symbol “.” in type designation may be blank, A~Z or numbers, and
denote different pin shape. Maximum operating temperature: 100°C. The
symbol “X” in type denotes X = Part no. (0,1,L,A,N).
Product
Pos. No
Model / Type Ref.
Optocouplers
14
EL617./CNY75G./CQY80.G/K233.G/TCDT110.G/TCDT111.G/TCDT112.G/
HS817.G/TCET110.G/TCET111.G/ TCET120.G
Trade mark (if different from page 1)
Rating
Principal characteristics
250Vrms
Optocoupler. Minimum external creepage distance is measured to 8.0mm,
minimum internal creepage distance is measured to 6.0mm and minimum
distance through insulation is measured to 0.5mm. Tested for reinforced
insulation. Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree
C, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. After the
cycling test a humidity test for 48h in 93% relative humidity. Electric strength
test between input and output 4800Vac/1 minute. The symbol “.” in type
designation may be blank, A~Z or numbers, and denote different pin shape.
Maximum operating temperature: 110°C
Date of issue 09-02-2015
Nastaran Vadoodi
Certification Department
Nemko AS
Gaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, Norway
TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected]
ENTERPRISE NUMBER NO974404532
nemko.com
CERTIFICATE
No. P15219385
Order No. 278135
Page 10/13
Product
Pos. No
Model / Type Ref.
Trade mark (if different from page 1)
Optocouplers
15
EL2200./EL2212./EL2231./EL2201./EL2202./EL2219./EL2211./ EL2232.
Rating
Principal characteristics
250Vrms
High Speed Optocoupler. Minimum external creepage distance is measured
to 8.2mm, minimum internal creepage distance is measured to 5.1mm and
minimum distance through insulation is measured to 0.5mm. Tested for
reinforced insulation. Thermal cycling test, 10 cycles. Each cycle: 68h in
100 degree C, 1h in 25degree C, 2h in 0 degree C and 1h in 25 degree C.
After the cycling test a humidity test for 48h in 93% relative humidity. Electric
strength tests, between input and output 4800Vac/1 minute. The symbol “.”
in type designation may be blank, A~Z or numbers, and denote different pin
shape. Maximum operating temperature: 100°C
Product
Pos. No
Model / Type Ref.
Optocouplers
16
CNX36U./CNX38U./CNX39U./SL5500./SL5501./SL5504./SL5511./
MOC8100./MOC8101./MOC8102./MOC8103./MOC8104./MOC8105./
MOC8106./MOC8107./MOC8108./EL9001./CNY17F-1./CNY17F-2./
CNY17F-3./CNY17F-4./H11AA1./H11AA2./H11AA3./H11AA4./HS817./
K817P./TCET110.
Trade mark (if different from page 1)
Rating
Principal characteristics
250Vrms
Optocoupler. Minimum external creepage distance is measured to 7.7mm,
minimum internal creepage distance is measured to 6.0mm and minimum
distance through insulation is measured to 0.5mm. Tested for reinforced
insulation. Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree
C, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. After the
cycling test a humidity test for 48h in 93% relative humidity. Electric strength
test between input and output 4800Vac/1 minute. The symbol "." in type
designation may be blank, A~Z or numbers, and denote different pin shape.
Maximum operating temperature: 110ºC.Tested for 5000m.
Date of issue 09-02-2015
Nastaran Vadoodi
Certification Department
Nemko AS
Gaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, Norway
TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected]
ENTERPRISE NUMBER NO974404532
nemko.com
CERTIFICATE
No. P15219385
Order No. 278135
Product
Pos. No
Model / Type Ref.
Page 11/13
Optocouplers
17
TCET111./TCET120./VO610A./VO615A./CNY17G./CNY75./CQY80./K233./
TCDT110./TCDT111./TCDT112./EL2501./EL2561./EL8171./CNY171-1./
CNY171-2./CNY171-4./CNY17F1-1./CNY17F1-2./CNY17F1-3./CNY17F1-4./
EL610./CNY171­3.
Trade mark (if different from page 1)
Rating
Principal characteristics
250Vrms
Optocoupler. Minimum external creepage distance is measured to 7.7mm,
minimum internal creepage distance is measured to 6.0mm and minimum
distance through insulation is measured to 0.5mm. Tested for reinforced
insulation. Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree
C, 1h in 25 degree C, 2h in 0 degree C and 1h in 25 degree C. After the
cycling test a humidity test for 48h in 93% relative humidity. Electric strength
test between input and output 4800Vac/1 minute. The symbol "." in type
designation may be blank, A~Z or numbers, and denote different pin shape.
Maximum operating temperature: 110ºC.Tested for 5000m.
Product
Pos. No
Model / Type Ref.
Optocouplers
18
EL806A./ EL810A./ EL820A./ EL825A./ EL835A./ EL840A./ EL860A./
EL406A./ EL410A./ EL420A./ EL425A./ EL435A./ EL440A./ EL460A./
EL606A./ EL610A./ EL620A./ EL625A./ EL635A./ EL640A./ EL660A.
Trade mark (if different from page 1)
Rating
Principal characteristics
250Vrms
Solid State Relay. Minimum external creepage distance is measured to
7.7mm, minimum internal creepage distance is measured to 6.0mm and
minimum distance through insulation is measured to 0.5mm. Tested for
reinforced insulation. Maximum operating temperature: 85ºC. Thermal
cycling test, 10 cycles. Each cycle: 68h in 85 degree C, 1h in 25 degree C,
2h in 0 degree C and 1h in 25 degree C. After the cycling test a humidity test
for 48h in 93% relative humidity. Electric strength test between input and
output 4800Vac/1 minute. The symbol "." in type designation may be blank,
A~Z or numbers, and denote different pin shape.
Date of issue 09-02-2015
Nastaran Vadoodi
Certification Department
Nemko AS
Gaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, Norway
TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected]
ENTERPRISE NUMBER NO974404532
nemko.com
CERTIFICATE
No. P15219385
Order No. 278135
Product
Pos. No
Model / Type Ref.
Page 12/13
Optocouplers
19
ELT301X./ ELT302X./ ELT305X./ ELT303X./ ELT304X./ ELT306X./
ELT308X./ ELT307X.
Trade mark (if different from page 1)
Rating
Principal characteristics
250Vrms
Triac Optocoupler. Minimum external creepage distance is measured to
7.7mm, minimum internal creepage distance is measured to 6.0mm and
minimum distance through insulation is measured to 0.5mm. Tested for
reinforced insulation. Maximum operating temperature: 110ºC. Thermal
cycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25 degree
C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test a humidity
test for 48h in 93% relative humidity. Electric strength test between input
and output 4800Vac/1 minute. The symbol “X” in type denotes X = Part
no. (0,1,2,3,4). The symbol "." in type designation may be blank, A~Z or
numbers, and denote different pin shape.
Product
Pos. No
Model / Type Ref.
Optocouplers
20
ELW137./ ELW139./ ELW2601./ ELW2611./ ELW136./ ELW135./
ELW4502./ ELW4503./ ELW138./ ELW260L./ ELW250L./ ELW4504.
Trade mark (if different from page 1)
Rating
Principal characteristics
250Vrms
High Speed Optocoupler. Minimum external creepage distance is measured
to 11.85mm, minimum internal creepage distance is measured to 7.72mm
and minimum distance through insulation is measured to 0.9mm. Tested
for reinforced insulation. Maximum operating temperature: 100°C. Thermal
cycling test, 10 cycles. Each cycle: 68h in 100 degree C, 1h in 25 degree
C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test a humidity
test for 48h in 93% relative humidity. Electric strength test between input and
output 4800Vac/1 minute. The symbol "." in type designation may be blank,
A~Z or numbers, and denote different pin shape.
Date of issue 09-02-2015
Nastaran Vadoodi
Certification Department
Nemko AS
Gaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, Norway
TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected]
ENTERPRISE NUMBER NO974404532
nemko.com
CERTIFICATE
No. P15219385
Order No. 278135
Page 13/13
Product
Pos. No
Model / Type Ref.
Trade mark (if different from page 1)
Optocouplers
21
EL3120./ EL3140./ EL3150./ EL3180./ EL3184.
Rating
Principal characteristics
250Vrms
IGBT Gate Drive Optocoupler. Minimum external creepage distance is
measured to 7.7mm, minimum internal creepage distance is measured to
6.0mm and minimum distance through insulation is measured to 0.5mm.
Tested for reinforced insulation. Maximum operating temperature: 110ºC.
Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25
degree C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test a
humidity test for 48h in 93% relative humidity. Electric strength test between
input and output 4800Vac/1 minute. The symbol "." in type designation may
be blank, A~Z or numbers, and denote different pin shape.
Product
Pos. No
Model / Type Ref.
Trade mark (if different from page 1)
Optocouplers
22
ELW3120./ ELW3140./ ELW3150./ ELW3180./ ELW3184.
Rating
Principal characteristics
250Vrms
IGBT Gate Drive Optocoupler. Minimum external creepage distance is
measured to 11.85mm, minimum internal creepage distance is measured to
7.72mm and minimum distance through insulation is measured to 0.9mm.
Tested for reinforced insulation. Maximum operating temperature: 110°C.
Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in 25
degree C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test a
humidity test for 48h in 93% relative humidity. Electric strength test between
input and output 4800Vac/1 minute. The symbol "." in type designation may
be blank, A~Z or numbers, and denote different pin shape.
Date of issue 09-02-2015
Nastaran Vadoodi
Certification Department
Nemko AS
Gaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, Norway
TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected]
ENTERPRISE NUMBER NO974404532
nemko.com