QIS4506002 Preliminary Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com HV Single Discrete IGBT 60 Amperes/4500 Volts A C N D F G B E (3) H J G (2) C (BASE) E (1) K R Description: Powerex Single Non-isolated Discrete is designed specially for customer high voltage switching and pulse power applications. L E M Q P E (1) C (BASE) E (3) G (2) Features: Low Drive Requirement Low VCE(sat) Molybdenum Mounting Plate Outline Drawing and Circuit Diagram DimensionsInches Millimeters DimensionsInches Millimeters A 2.35 59.7 J 0.93 23.6 B 0.98 25.0 K 0.14 3.6 C 1.98 50.3 L 0.20 5.2 D 0.197 5.0 M 0.40 1.0 E 0.22 5.5 N 0.43 11.0 F 0.22 5.6 P 0.20 0.5 G 0.465 11.8 Q 0.12 3.0 H 0.27 6.9 R 0.208 Dia. 5.3 Dia. Information presented is based upon manufacturers testing and projected capabilities. This information is subject to change without notice. The manufacturer makes no claim as to the suitability of use, reliability, capability, or future availability of this product. 11/14 Rev. 4 1 Preliminary Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com QIS4506002 HV Single Discrete IGBT 60 Amperes/4500 Volts Maximum Ratings, Tj = 25 °C unless otherwise specified Ratings SymbolQIS4506002Units Collector Emitter Voltage VCES 4500Volts Gate Emitter Voltage VGES ±20Volts Collector Current (DC, TC = 127°C) IC Peak Collector Current (Pulsed) ICM 60Amperes 120*Amperes Junction Temperature Tj -55 to 150 Storage Temperature °C Tstg -55 to 125 °C Mounting Torque, M5 Mounting Screws — 30 in-lb Weight (Typical) — 20 Grams Static Electrical Characteristics, Tj = 25 °C unless otherwise specified Characteristics Symbol Collector Cutoff Current Gate Leakage Current Test Conditions ICESVCE = VCES, VGE = 0V IGESVGE = VGES, VCE = 0V Gate-Emitter Threshold Voltage VGE(th)IC = 7mA, VCE = 10V Collector-Emitter Saturation Voltage Min. Typ. Max. Units — — 1.0 mA — — 0.5 µA 4.5 6.0 7.5 Volts VCE(sat)IC = 60A, VGE = 15V, Tj = 25°C — 3.0 3.9** Volts IC = 60A, VGE = 15V, Tj = 125°C — 3.6 — Volts Total Gate Charge — 450 — nC Min. Typ. Max. Units QGVCC = 2250V, IC = 60A, VGE = 15V Dynamic Electrical Characteristics, Tj = 25 °C unless otherwise specified Characteristics Symbol Test Conditions Input Capacitance Cies —9.0— nF Output Capacitance CoesVGE = 0V, VCE = 10V — 0.65 — nF Reverse Transfer Capacitance Cres —0.2— nF Resistive Turn-on Delay Time td(on)VCC = 2250V, — Load Rise Time Switching Turn-off Delay Time Times Fall Time tr IC = 60A, td(off)VGE1 = VGE2 = 15V, tfRG = 120Ω — 2.4 µs — — 2.4 µs — — 6.0 µs — — 1.2 µs Turn-on Switching Energy EonTj = 125°C, IC = 60A, VCC = 2250V, — 250 — mJ/P Turn-off switching Energy EoffVGE = ±15V, RG = 120Ω, LS = 180nH — 170 — mJ/P Min. Typ. Max. Units Thermal and Mechanical Characteristics, Tj = 25 °C unless otherwise specified Characteristics Symbol Thermal Resistance, Junction to Case Rth(j-c) Thermal Resistance, Case to Sink Rth(c-s) Test Conditions IGBT λgrease = 1W/mK — 0.10 TBD°C/W — 0.10 — °C/W Thermal Grease Applied * Pulse width and repetition rate should be such that device junction temperature (Tj) does not exceed device rating. **Pulse width and repetition rate should be such that device junction temperature rise is negligible. Information presented is based upon manufacturers testing and projected capabilities. This information is subject to change without notice. The manufacturer makes no claim as to the suitability of use, reliability, capability, or future availability of this product. 2 11/14 Rev. 4 Preliminary Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com QIS4506002 HV Single Discrete IGBT 60 Amperes/4500 Volts OUTPUT CHARACTERISTICS (TYPICAL) 875 14V 12V 10V 75 50 25 8V Tj = 25°C 2 4 8 6 625 500 375 250 125 0 10 0 4 COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTAGE) IC = 100A IC = 50A IC = 25A 2 0 20 4 8 12 16 0 25 50 75 100 360 300 200 100 0 25 50 75 300 240 180 120 60 0 100 VCC = 2250V VGE = 15V RG = 120Ω LS = 180nH Tj = 125°C Inductive Load Integrated Over Range of 10% 0 25 50 75 COLLECTOR CURRENT, IC, (AMPERES) COLLECTOR CURRENT, IC, (AMPERES) GATE CHARGE CHARACTERISTICS (TYPICAL) CAPACITANCE CHARACTERISTICS (TYPICAL) TURN-ON SWITCHING SAFE OPERATING AREA (RBSOA) (TYPICAL) 102 VCC = 2250V IC = 60A 12 8 4 Cies 100 Coes Cres 0 250 500 750 GATE CHARGE, QG, (nC) 1000 10-1 100 100 125 VGE = 15V Tj = 25°C Cies, Coes: f = 100kHz Cres: f = 1MHz 101 10-1 125 TURN-OFF SWITCHING ENERGY CHARACTERISTICS (TYPICAL) VCC = 2250V VGE = 15V RG = 120Ω LS = 180nH Tj = 125°C Inductive Load Integrated Over Range of 10% 400 0 20 16 0 1 GATE-EMITTER VOLTAGE, VGE, (VOLTS) CAPACITANCE, Cies, Coes, Cres, (nF) GATE-EMITTER VOLTAGE, VGE, (VOLTS) TURN-ON SWITCHING ENERGY, Eon, (mJ/P) COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) 8 0 2 COLLECTOR CURRENT, IC, (AMPERES) 500 4 3 TURN-ON SWITCHING ENERGY CHARACTERISTICS (TYPICAL) Tj = 25°C 6 4 0 20 16 VGE = 15V Tj = 25°C Tj = 125°C 5 GATE-EMITTER VOLTAGE, VGE, (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) 10 12 8 TURN-OFF SWITCHING ENERGY, Eoff, (mJ/P) 0 750 COLLECTOR CURRENT, IC, (VOLTS) 0 6 VCE = 10V Tj = 25°C Tj = 125°C COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) VGE = 20V 15V COLLECTORCURRENT, IC, (AMPERES) COLLECTOR CURRENT, IC, (AMPERES) 100 COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) TRANSFER CHARACTERISTICS (TYPICAL) 101 102 COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) 100 75 50 VCC = 3000V VGE = 15V RG = 120Ω LS = 100nH Tj = 125°C 25 0 0 1000 2000 3000 4000 5000 COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) Information presented is based upon manufacturers testing and projected capabilities. This information is subject to change without notice. The manufacturer makes no claim as to the suitability of use, reliability, capability, or future availability of this product. 11/14 Rev. 4 3