Primary

Startup Manual
Packing List
Specifications
Before you begin installing your card, please make sure
that the following materials have been shipped:
Standard SBC Functions
• 1 PCA-6003 socket 370 Pentium® III processorbased single board computer
• CPU:Socket 370 for Intel ® Pentium® III/Celeron
processor
• 1 FDD cable
p/n: 1701340703
• BIOS: Award 2 Mb Flash memory BIOS
• 2 UDMA 66 HDD cables
p/n: 1701400452
• System memory: Two 168-pin DIMM sockets
accepts up to 1 GB SDRAM
• 1 printer (parallel port) and COM port cable kit
p/n: 1701260305
• 1 ATX-to-PS/2 power cable
p/n: 1700000450
• 1 ivory cable for PS/2 keyboard and PS/2 mouse
p/n: 1700060202
• 1 USB cable (optional)
p/n: 1700100170
• This startup manual
• 1 driver CD-ROM with user's manual (in PDF format)
• Enhanced IDE interface: Supports up to four EIDE
devices. BIOS auto-detect, PIO Mode 3 or Mode 4,
UDMA 33/66/100 transfer
• FDD interface: Supports up to two FDDs
• Serial ports: Two serial RS-232 ports,
• Parallel port: One parallel port, supports
SPP/EPP/ECP mode
• Keyboard/mouse connector: Supports a standard
PS/2 keyboard and a PS/2 mouse
• Warranty certificate
• Power management: Supports power saving modes
including Normal/Standby/Suspend modes.
If any of these items are missing or damaged, contact
your distributor or sales representative immediately.
• Watchdog timer: 63 level timer intervals
• USB: Two Universal Serial Bus ports
Note 1:
Note 2:
For detailed contents of this product, please
refer to the enclosed CD-ROM or disk (in
PDF format).
Acrobat Reader is acquired to view any PDF
file. Acrobat Reader can be downloaded at:
www.adobe.com/Prodindex/acrobat/
readstep.html
(Acrobat is a trademark of Adobe.)
VGA/LCD Interface
• Controller: Chipset integrated high performance
VGA controller
• Display memory: Share system SDRAM up to 8 MB
VGA Interface
• Chipset: Realtek™ RTL8139 C
• Ethernet interface: PCI 10/100 Mbps Ethernet, IEEE
802.3U protocol compatible
• Connection: On-board RJ-45 connector
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
For technical support and service, please visit our
support website at:
PCA-6003 Socket 370 Pentium® III/Celeron SBC with VGA and Ethernet
PCA-6003 Socket 370 Pentium® III/Celeron
SBC with VGA and Ethernet
http://support.advantech.com
This manual is for the PCA-6003 series Rev. A1
Part No. 2002600310
Printed in Taiwan
1st. Edition
November 2001
PCA-6003 Startup Manual
1
Specifications Cont.
Mechanical and Environmental
• Dimensions (L x W): 338 x 122 mm
• Power supply voltage: +5 V, ± 12 V
• Power requirements: 6.8 A @ +5 V, 400mA @ + 12
V (typical, with Pentium® III 1 GHz and 256 MB
SDRAM)
• Operating temperature: 0 ~ 60° C (Depending on
CPU)
• Weight: 0.5 kg (weight of board)
Jumpers and Connectors
The board has a number of jumpers that allow you to
configure your system to suit your application.
The table below lists the function of each of the
jumpers and connectors.
Label
Function
J1
J2
CMOS clear
Watchdog timer output
Label
CN1
CN2
CN3
CN4
CN6
CN7
CN8
CN9
CN10
CN11
CN12
CN13
CN14
CN16
CN17
CN18
CN19
CN20
CN21
CN22
CN24
CN29
Function
Primary IDE connector
Secodary IDE connector
Floppy drive connector
Parallel port
USB port
VGA connector
10/100 LAN connector
Serial port: COM1
Serial port: COM2
PS/2 keyboard and mouse
External keyboard connector
Infrared (IR) connector
CPU FAN connector
POWER LED and keyboard lock
External speaker
Reset connector
HDD LED connector
ATX feature connector
ATX soft power switch
Reserved (default close)
Chassis fan
External SM bus connector
J1: CMOS clear function
Closed pins
1-2
2-3
Result
Keep CMOS data*
Clear CMOS
3
2
2
1
PCA-6003 Startup Manual
J2: Watchdog timer output
Closed pins
Result
1-2
IRQ11
2-3
System reset *
* denotes default setting
PCA-6003 Locating connectors
PCA-6003 Startup Manual
3