PCM-9388 Celeron® M 3.5” SBC with PC/104, VGA/ TTL/LVDS Ethernet/USB 2.0 and SSD Startup Manual Specifications Packing List Before installation, please make sure that you have received the following: 1. 1 PCM-9388 SBC 2. 1 Startup Manual 3. 1 Utility CD 4. 1 Mini jumper pack 5. 1 Audio cable p/n: 1703100152 6. 1 IDE 44 pin connector p/n: 1701440504 7. 1 USB 2 port cable p/n: 1703100121 8. 1 Parallel port cable p/n: 1700260250 9. 1 Keyboard/Mouse cable p/n: 1700060202 10. 1 Second serial port cable p/n: 9689000002 p/n: 1701140201 If anything is missing or damaged, contact your distributor or sales representative immediately. Note1: For detailed contents or the PCM-9388, please refer to the enclosed CD Disc (in PDF format). Note2: Acrobat Reader is required to view any PDF file. Acrobat Reader can be downloaded at: http://www.adobe.com/products/acrobat/readerstep2.html (Acrobat is a trademark of Adobe). Standard PC functions • CPU: ‑Embedded Intel ULV Celeron M 600 MHz (512 K L2 cache) ‑Embedded Intel ULV Celeron M 1.0 GHz (0 K L2 cache ) • System Memory: 1 x SODIMM socket, supports Double Data Rate (DDR) 128 MB to 1 GB, DDR 200/266 DRAM • 2nd Cache Memory: Depends on CPU type from 0 to 512 KB • System Chipset: Intel 852GM GMCH/ICH4 chipset • BIOS: Award 4-Mbit Flash BIOS • Watchdog Timer: 255 level timer interval • Expansion Interface: PC/104 • Battery: Lithium 3 V/210 mAH • Enhanced IDE interface: One channel supports up to two EIDE devices. BIOS auto-detect, PIO Mode 3 or Mode 4, supports UDMA 33 mode • Serial ports: Two serial RS-232 ports, COM1: RS-232, COM2: RS-232/422/485 • Parallel port: One parallel port, supports SPP/EPP/ECPmode, shared with FDD • Keyboard/mouse connector: Supports one standard PC/AT keyboard and a PS/2 mouse • Audio: Supports AC97 Audio stereo sound • USB: Two USB 2.0 compliant universal serial bus ports • IrDA: 115Kbps, SIR, IrDA 1.0 complaint (optional) • GPIO: 8-bit general purpose Input/Output Solid State Disk • Supports one 50-pin socket for CFC type I VGA/LVDS Interface For more information on this and other Advantech products, please visit our website at: http://www.advantech.com http://www.advantech.com/eplatform For technical support and service, please visit our support website at: http://www.advantech.com/support/ This manual is for the PCM-9388 Series Rev. A2. Part No. 2006938803 Printed in China • Chipset: Intel 852GM GMCH • Memory Size: Optimized Shared Memory Architecture, supports up to 64 MB frame buffer using system memory • Resolution: ‑CRT display Mode: pixel resolution up to 1600 x 1200 @85 Hz; up to 1920 x 1440 @ 60 Hz ‑LVDS display mode: up to UXGA panel resolution with frequency range from 25 MHz to 112 MHz • TTL LCD: supports 18-bit TTL LCD • LVDS LCD: supports 2 channel (2 x18-bit) LVDS LCD Panel (2 x 24-bit optional) • Dual Independent Display: ‑CRT + LVDS ‑CRT + TTL 4th Edition, April 2009 PCM-9388 Startup Manual Specifications (cont.) Connectors Label Function CN1 AT power connector CN2 ATX POWER Standby Connector CN3 SMBus CN4 FAN Connector (SPEED Detect) CN5 ATX Power Button Connector Audio Function CN6 GPIO • Chipset: Intel(r) 82801DB I/O Controller Hub 4 (ICH4) and ALC203 codec • Audio controller: Supports AC97 3D Audio stereo sound • Audio interface: line in, line out, Microphone in CN7 AUDIO Connector CN8 IDE Connector CN9 CompactFlash CN10 HDD & PWR LED CN11 VGA CN12 COM1 CN13 LPT Connector CN14 IR Connector CN15 COM2 RS-232/RS-422/RS-485 Connector CN16 USB Connector CN17 PS2 (KB & MS) CN19 LAN Connector CN20 PC/104 SOLDER Connector CN21 Negative POWER Input CN22* LVDS LCD 40-Pin HIROSE CN23 Invert Power Connector CN24* TTL LCD 40-Pin HIROSE Ethernet Interface • Chipset supports: 10/100 Mbps - Realtek RTL8100CL (With Wake on LAN) • Ethernet interface: IEEE 802.3u (100 BASE-T) protocol compatible • Built-in boot ROM • Temperature: 0 ~ 40° C (32 ~ 104° F) Mechanical Environment • Dimensions: 145 x 102 mm (5.9” x 4.2”) Mechanical Drawing (dxf file) is available. • Power Supply Type: AT/ATX • Power Requirement: +5 V ±5%, +12 V ±5% (Optional), 5 V standby for ATX mode, or supports single +5 V only • Power Consumption: ULV Celeron M 600 MHz@ 256 MB DDR 266 Max (HCT): +5 V@ 2.21 A, +12 V@ 0.17 A • Operating Temperature: 0 ~ 60° C (32 ~ 140° F) • Weight: 0.85 kg (reference weight of total package) Jumpers and Connectors The board has a number of jumpers that allow you to configure your system to suit your application. The table below lists the function of each of the jumpers and connectors. Jumpers Label Function J1 AT/ATX selector J2 Audio power selector J3/J5/J4 COM2 J6 LCD power selector *Note: Please do not put more than 15 kg pressure on top of the LVDS connector during the LVDS cable assembly with PCM-9388. J1 AT/ATX selector Description PIN HEADER 2*1P 180D (M) SQUARE 2.0 mm DIP W/O Pb Setting Function (1-2) AT Power none ATX Power 1 PCM-9388 Startup Manual 2 1 2 J2 Audio Power Source Description PIN HEADER 3*1P 180D (M) SQUARE 2.0 mm Setting Function 1-2 (*) Audio Power from 12 V-input & 5 Voutput LDO 2-3 Audio Power from 5 V *: Default 1 2 3 1 2 3 J3/J4/J5 COM2 Setting (RS-232 Default) Description PIN HEADER 2*1P 180D (M) SQUARE 2.0 mm Setting Function J3(1-2) RS-422 J4(1-2) RS-485 J5(1-2) RS-232 J6 LCD Power Pin Signal 1-2 +5 V 2-3 (*) +3.3 V *: Default 1 2 3 1 2 3 PCM-9388 Startup Manual Figure 1: PCM-9388 Layout (Component Side) Figure 2: PCM-9388 Layout (Solder Side) PCM-9388 Startup Manual Figure 3: PCM-9388 Mechanical Drawing (Component Side) Figure 4: PCM-9388 Mechanical Drawing (Solder Side) PCM-9388 Startup Manual