Specifications Packing List Before you begin installing your card, please make sure that the following materials have been shipped: • 1 PCE-5120 Dual Intel® Pentium® D/Pentium® 4/ Celeron® D processor-based single board computer • 1 PCE-5120 Startup Manual • 1 CD with driver utility and manual (in PDF format) • 1 FDD cable p/n: 1700340640 • 1 Ultra ATA 66/100 HDD cables p/n: 1701400452 • 2 Serial ATA HDD data cable p/n: 1700071000 • 2 Serial ATA HDD power cable p/n: 1703150102 • 1 Printer (parallel) port & COM port cable kit p/n: 1701260305 • 1 Dual COM port cable kit p/n: 1701092300 • 1 Y cable for PS/2 keyboard and PS/2 mouse p/n: 1700060202 • 1 CPU cooler p/n: 1750000400 • 1 USB cable with 4 ports p/n: 1700002314 • Warranty card Standard SBC Functions • CPU: Supports Intel® LGA 775 Pentium® D/ Pentium® 4/ Celeron® D processors up to 3.2/3.8/3.06 GHz, FSB 533/800 MHz. • BIOS: Award® 4 Mb Flash memory BIOS • Chipset: Intel® 945G with ICH7R • System Memory: Dual Channel; Four 240-pin DIMM sockets accepts up to 4 GB DDR2 533/667 SDRAM Note: Due to inherent limitations of the PC architecture, the system may not fully detect 4 GB RAM if 4 GB RAM is installed. • SATA/IDE interface: Supports up to four independent SATA2 hard drives (up to 300MB/s) with software RAID 0,1, 5,10 functions; supports up to one IDE hard disk drives, or two enhanced IDE devices. The IDE port may be altered to a Type II CF socket. • FDD interface: Supports up to two FDDs • Serial ports: Four serial RS-232 ports; COM2 can be configured to RS-232/422/485 thru pin header • Parallel port: One parallel port, supports SPP/EPP/ ECP mode • Keyboard/mouse connector: Supports one standard PS/2 keyboard and mouse connector and one external 6-pin pin header. • Watchdog timer: 255 level timer intervals • USB (2.0): Four Universal Serial Bus ports to Backplane and four ports on board If any of these items are missing or damaged, contact your distributor or sales representative immediately. Note 1: For detailed contents of the PCE-5120, please refer to the enclosed CD-ROM (in PDF format). Note 2: Acrobat Reader is required to view any PDF file. Acrobat Reader can be downloaded at: www.adobe.com/Prodindex/acrobat/readstep.html (Acrobat is a trademark of Adobe.) VGA Interface • • • • Chipset: Intel® 945G integrated Display memory: Shared with 224 MB system memory Video Output: Up to 2048 x 1536 @ 75 Hz refresh External Card: PCI Express X16 Graphic Card interface to back plane Ethernet Interface • Chipset: LAN1: Intel 82573V (PCIe GbE) LAN2: Intel 82573V (PCIe GbE) • Connection: On-board RJ-45 connector x 2 For more information on this and other Advantech products, please visit our website at: http://www.advantech.com http://www.advantech.com/eplatform For technical support and service, please visit our support website at: http://www.advantech.com/support This manual is for the PCE-5120 series Rev. A1. Part No. 2002512010 Printed in Taiwan 1st. Edition July 2006 Mechanical and Environmental • Dimensions: (L x W): 338 x 122 mm • Power supply voltage: +5 V ± 12 V • Power requirements: CPU: Intel® Pentium® D 3.2 GHz/2M/800/130W MEMORY: DDR2 667 MHz 1 GB x 4 Test program,Intel Max power 100% + BurnIn Test 4.0 +12V 15 A +5V 2A +3.3V 20 A +5VSB 0.7 A -12V 0A -5V 0A • Operating temperature: 0 ~ 55 °C (depending on CPU) • Weight: 0.5 kg (weight of board) PCE-5120 Startup Manual 1 PCE-5120 LGA775 Intel® Pentium® D / Pentium® 4 / Celeron® D Processor Card with PCI Express / IPMI / VGA / Dual Gigabit LAN PCE-5120 LGA775 Intel® Pentium® D / Pentium® 4 / Celeron® D Processor Card with PCI Express / IPMI / VGA / Dual Gigabit LAN Connectors and Jumpers The board has a number of connectors and jumpers that allow you to configure your system to suit your application. JWDT1: Watchdog timer output option Closed Pins Result 1-2 Reserved 2-3 System reset * The table below lists the function of each of the connectors and jumpers. 1 2 3 Connectors Label IDE1 FDD1 LPT1 VGA1 COM1 COM2 COM3 COM4 KBMS1 KBMS2 JIR1 CPUFAN1 JFP1 JFP2 JFP3 JOBS1 Function Primary IDE connector Floppy drive connector Parallel port VGA connector Serial port:COM1 ( 9-pin connector) Serial port:COM2 ( 9-pin connector) Serial port:COM3 ( 9-pin connector) Serial port:COM4 ( 9-pin connector) PS/2 keyboard and mouse connector External keyboard/mouse connector Reserved CPU1 FAN connector Power and Reset Button connector HDD LED/SNMP SMbus/Speaker connector Power LED and keyboard lock connector HW Monitor Alarm Close: Enable OBS Alarm Open: Disable OBS Alarm LAN1 Giga LAN RJ45 connector LAN2 Giga LAN RJ45 connector AC97 AC’97 Link connector SATA1 Serial ATA1 SATA2 Serial ATA2 SATA3 Serial ATA3 SATA4 Serial ATA4 LANLED1 LAN1 and LAN2 LED connector BMC1 BMC connector USB12 Two USB port pin headers USB34 Two USB port pin headers EXPCI1 HIROSA Extended PCI connector (Optional) Jumpers Label CMOS1 JWDT1 JSETCOM2 Function CMOS clear Watchdog timer output selection COM2 RS232/422/485 selection CMOS1: CMOS clear function Closed Pins Result 1-2 Keep CMOS data* 2-3 Clear CMOS 1 2 * default setting * default setting JSETCOM2: COM2 RS232 / 422 / 485 selection COM2 Port FunctionJumper Configuration RS-232* RS-422 RS-485 17 15 13 11 9 7 5 3 1 18 16 14 12 10 8 6 4 2 17 15 13 11 9 7 5 3 1 18 16 14 12 10 8 6 4 2 17 15 13 11 9 7 5 3 1 18 16 14 12 10 8 6 4 2 * default setting Software Installation • The CD disc contains a driver installer program that will lead you through the installation of various device drivers needed to take full advantage of your CPU card. Caution The computer is provided with a battery-powered Real-time Clock circuit. There is a danger of explosion if battery is incorrectly replaced. Replace only with same or equivalent type recommended by the manufacturer. Discard used batteries according to manufacturer's instructions Safety Information 3 This device complies with the requirements in Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. 2 PCE-5120 Startup Manual Board Layout The location of all connectors and jumpers: Board Layout: Jumper and Connector Location PCE-5120 Startup Manual 3 CPU Cooler Installation Please ensure that the CPU cooler included with the PCE-5120 is installed as follows: CPU Cooler Installation 4 PCE-5120 Startup Manual