Packing List Before you begin installing your card, please make sure that the following materials have been shipped: • 1 PCM-9372 all-in-one single board computer • 1 startup manual • CD-ROM or disks for utility, drivers, and manual (in PDF format) • 1 3.5" IDE flat cable 40-pin to 40-pin (patr no: 1701400452) • FDD interface: Supports up to two FDDs • Serial ports: Two serial RS-232 ports, COM1: RS-232, COM2: RS-232/422/485 • Parallel port: One parallel port, supports SPP/EPP/ ECP mode • Keyboard/mouse connector: Supports standard PC/ AT keyboard and a PS/2 mouse • 1 keyboard/ PS2 monse cable (part no. 1700060202) • Power management: Supports power saving modes including Normal/Standby/Suspend modes. APM 1.2 compliant • 1 second serial port cable (part no.1701140201) • Watchdog timer: 62 level timer intervals • 1 parallel port cable (part no. 1700260250) • USB: Two USB 1.1 compliant universal serial bus ports • 1 FDD cable for 3.5" FDD only (part no.1701340603) • 1 Audio cable (part no. 1703100152) • Expansion: One PC/104 connector for ISA control board • 1 USB cable (part no. 1703100121) Solid State Disk If any of these items are missing or damaged, contact your distributor or sales representative immediately. • Supports one 50-pin socket for CFC type I/II Note: For detailed contents of the PCM-9372, please refer to the enclosed CD-ROM or disk (in PDF format). VGA/LCD Interface • Chipset: VIA Twister chip with integrated Savage4 2D/ 3D/Video Accelerator • Frame buffer: Supports 4/8/16/32MB frame buffer with system memory Specifications • CPU: Onboard Eden 667MHz MHz (PCM-9372F-M0A1) or VIA Eden 400 MHz processor (PCM-9372F-J0A1) with 128KB L1 cache memory) • BIOS: Award 256 KB Flash memory • System memory: One 144-pin SODIMM socket accepts 64 MB up to 512 MB SDRAM • 2nd cache memory: 64 KB on the processor • Enhanced IDE interface: One channels supports up to two EIDE devices. BIOS auto-detect, PIO Mode 3 or Mode 4, supports up to UDMA 66/100 mode For more information on this and other Advantech products, please visit our website at: • Interface: 4X AGP VGA/LCD interface, Support for 9, 12, 15, 18, 24, 36 bit TFT and optional 16- or 24-bit DSTN panel • Display mode: CRT Modes: 1280 x 1024@16bpp (60Hz), 1024 x 768@16bpp (85Hz); LCD/Simultaneous Modes: 1280 x 1024@16bpp (60Hz), 1024 x 768@16bpp (60Hz) • LVDS: Supports 2 Channel (2 x 18bit) LVDS interface Ethernet interface • Chipset: RTL 8100 • Ethernet interface: IEEE 802.3u 100BASE-T Fast Ethernet compatible • I/O address switchless setting http://www.advantech.com • Built-in boot ROM http://www.advantech.com/epc For technical support and service, please visit our support website at: Audio Function http://support.advantech.com • Chipset: VIA 82C686 This manual is for the PCM-9372 series Rev. A1. Part No. 2006937200 1st Edition Printed in Taiwan Sep., 2002 1 PCM-9372 Startup Manual • Audio controller: AC’97 ver. 2.0 compliant interface • Audio interface: Microphone in, line in, line out PCM-9372 VIA Eden SBC with CPU, VGA/LCD, LVDS, Ethernet, and Audio PCM-9372 VIA Eden SBC with CPU, VGA/ LCD, LVDS, Ethernet, and Audio Startup Manual Mechanical and Environmental • Dimensions 145 x 102 mm (5.9"x 4.2") • Power supply voltage: +5 V ±5% and +12V ±5% • Power requirements: Max 4.5A@+5V, 1.3A@+12V (Within 5ms after power on) typical 2.08A@5V,0.08A@+12V (W/ Eden-400,128MB) 2.33A@5V,0.08A@+12V (W/ Eden-667,128MB) • Operating temperature: 0 ~ 60°C (32 ~ 140°F) • Weight: 0.85 kg (weight of total package) Jumpers and Connectors The board has a number of jumpers and connectors that allow you to configure your system to suit your application. The tables below list the function of each jumper and connector. Label S1 S2 S3 JP1 Jumpers Function System reset button CMOS clear button Panel type select COM2 RS232/422/485 & WDT setting Label CN1 CN2 CN3 CN4 CN5 CN6 CN7 CN8 CN9 CN10 CN11 CN12 CN13 CN14 CN15 CN16 CN17 CN18 CN19 CN20 CN21 CN22 Connectors Function LCD Inverter control connector Flat panel connector LVDS connector Ext. flat panel connector CRT display connector PC/104 expansion ATX feature connector COM 1 port connector Main Power connector Peripheral power connector (-5V, -12V) Power & HDD LED connector Keyboard and PS/2 mouse connector IDE hard drive connector (primary) Audio connector Ethernet connector COM2 port connector USB channel 1, 2 connector ATX power on/off switch connector Parallel port connector Floppy drive connector CFC connector CPU fan power connector PCM-9372 Switches & Jumpers S2 CMOS clear button Condition Result unpressed* Normal pushed Clear CMOS JP1 Watchdog timer action Pins System reset* 7-8 closed 9-10 open JP1 COM2 RS-232/422/485 select Pins RS-232* RS-422 1-2 Open Open 3-4 Open Closed 5-6 Closed Open * default setting 2 PCM-9372 Startup Manual IRQ11 open closed RS-485 Closed Open Open CN10 CN 20 CN19 CN14 CN16 CN12 CN15 CN17 CN11 CN13 CN18 CN6 CN5 CN8 CN7 CN9 CN 2 CN 3 CN 4 CN1 CN22 PCM-9372 Connectors (component side) S1 Panel Type select SW SW SW SW 1-1 1-2 1-3 1-4 Panel type ON ON ON ON DSTN** 640x480 ON ON ON OFF TFT 640x480 ON ON OFF ON TFT 640x480 ON ON OFF OFF (Resvd) ON OFF ON ON (Resvd) ON OFF ON OFF DSTN** 800x600 ON OFF OFF ON TFT* 800x600 ON OFF OFF OFF TFT 800x600 OFF ON ON ON (Resvd) OFF ON ON OFF (Resvd) OFF ON OFF ON DSTN** 1024x768 OFF ON OFF OFF TFT 1024x768 OFF OFF ON ON TFT 1024x768 OFF OFF ON OFF TFT 1024x768 OFF OFF OFF ON TFT 1024x768 OFF OFF OFF OFF TFT 1024x768 * Default setting ** will support in the future PCM-9372 Switches & Connectors (solder side) 18bit 18bit LVDS 18bit 18bit LVDS 36bit 36bit 1Chan LVDS 2Chan LVDS 18bit 24bit PCM-9372 Startup Manual 3 PCM-9372 Mechanical Drawing(component side) PCM-9372 Mechanical Drawing (solder side) 4 PCM-9372 Startup Manual