PCM-3362 PC/104-plus SBC w/Intel® Atom N450, VGA, LVDS, LAN, USB2.0, SATA, and on-board flash Startup Manual Specifications Packing List Before you begin installing your card, please make sure Standard SBC functions that the following materials have been shipped: • CPU: Intel Atom N450 processor, up to 1.67 GHz • System memory: supports Double Data Rate (DDR) DDR2 667 SDRAM up to 2 GB Note: PCM-3362 does not support DDR2 533 SDRAM • • • • • • • • • • • • • • 1 x PCM-3362 SBC 1 x SATA data cable (p/n: 1700071000) 1 x SATA power cable (p/n: 1703150102) 1 x Keyboard/Mouse cable (p/n: 1703060053) 1 x Y cable for KB/MS extension (p/n: 1700060202) 1 x Ethernet RJ-45 conn. cable (p/n: 1700017863) 1 x VGA cable (p/n: 1700000898) 1 x USB cable (p/n: 1703100260) (bracket type with two USB ports) 1 x RS-422/485 COM cable (p/n: 1703040157) 1 x RS-232 COM cable (p/n: 1701200220) 1 x ATX power cable (p/n: 1700002332) 1 x AT power cable (p/n: 1700003491) 1 x Startup Manual (this manual) 1 x CD-ROM (Manual, Driver, Utility) If any of these items are missing or damaged, please contact your distributor or sales representative immediately. • • • • • • • • • • • • 2nd cache memory: 512 KB on the processor System chipset: Intel® ICH8M BIOS: AMI 16 Mbit Flash BIOS Watchdog timer: 255 levels timer interval Expansion interface: PC/104-Plus (ISA and PCI bus) Battery: Lithium 3 V/210 mAH Power management: ACPI supported Serial ATA: One Serial ATA2 interface, speed up to 300MB/s Flash: On board 2 GB flash (IDE interface) Serial ports: Two serial RS-232 ports, one RS-422/485 ports Keyboard/mouse connector: Supports one standard PC/AT keyboard and a PS/2 mouse USB: Four USB 2.0 ports compliant universal serial bus ports High definition audio: PCM-3362 can provide audio function with the optional audio extension module PCAAUDIO-HDA1E and specific audio cable Model No.List Description • PCM-3362N-S6A1E Intel Atom N450 PC/104-Plus SBC, VGA, LVDS, LAN, USB,SATA and on-board flash VGA/TTL Interface Optional Accessary 1 x heatspreader Note: (p/n:1960047106T001) Acrobat Reader is required to view PDF files. Acrobat Reader can be downloaded at: www.adobe. com/Prodindex/acrobat/read-step.html (Acrobat is a trademark of Adobe). • Controller: Integrated graphic core of Embedded en3.5+ technology • VRAM: 224 MB shared system memory • Output interfaces: – VGA: Supports up to SXGA 1400 x 1060 @ 60 Hz – LVDS: Singe channel 18-bit LVDS up to WXGA 1366 x 768 – Dual display: CRT + LVDS, supports extended mode and clone mode Ethernet Interface For more information on this and other Advantech products, please visit our website at: • Supports Single 10/100/1000 Mbps Ethernet networking • Controller: Intel® 82567V http://www.advantech.com OS Support http://www.advantech.com/eplatform http://service.advantech.com/support • This board supports Win 7, Win XP, Win CE and Win XPe • For further information about OS support in your PCM3362, please visit the Adventech website: www.advantech.com, or contact your technical support center. This manual is for the PCM-3362 Series Rev. A1. Mechanical and Environmental Part No. 2006336200 Printed in China • Dimensions: 96 x 90 mm (3.8” x 3.5”) • Power supply type: AT/ATX For technical support and service, please visit our support website at: 1st Edition Decmber 2009 PCM-3362 Startup Manual Specifications • Power requirement: +5 V ± 5%, +12 V ± 5% (Optional), 5 V only, 12 V optional for PC104 add on card and LCD inverter) • Power consumption: (Geode LX800, 512 MB DDR333) - Power on Load: +5 V@ 1.79 A, +12 V@ 0.02 A - Max load: +5 V@ 2.37 A, +12 V@ 7 mA - Idle mode: +5 V@ 2 A, +12 V@ 5 mA • Power consumption Conditions: - Test software: Maxpower + 3DMark 2005 - Power on - Boot: Measure the maximum current value of between system power on and boot-up to O.S. - Max. load: Measure the maximum current value which system under maximum load (CPU: Top speed , RAM & Graphic: Full loading) - Idle mode: Measure the current value when system in windows mode and without running any program • Operating temperature: 0 ~ 60° C (32 ~ 140° F) ( operation humidity: 40°C @ 85% RH Non-Condensing) • Weight: 0.85 kg (reference weight of total package) Jumpers and Connectors The board has a number of jumpers that allow you to configure your system to suit your application. The table below lists the functions of each of the jumpers and connectors. Jumpers and Connectors CN17 RS422/485 Connecter CN18 LAN Connecter CN19 LAN LED Connecter CN20 PS2 Keyboard/Mouse Connecter CN21 GPIO Connecter CN23 ATX Power In Connecter CN24 Power In Connecter CN25 I2C BUS Connecter CN26 -12V & -5V power connecter P1 PC104-plus Connecter BH1 RTC Battery Connecter Clear CMOS (JP1) Setting Function 1~2 Normal (default) 2~3 Clear CMOS 1 Jumpers Label Function JP1 CLEAR CMOS JP2 LVDS Panel Power Select JP3 COM3 RS422/RS485 Select JP4 PCI I/O Voltage Select Connectors 2 3 1 3 Warning! To avoid damaging the computer, always turn off the power supply before clearning CMOS. LVDS Panel Power Select (JP2) Setting Function 1~2 5V 2~3 3.3 V (default) Label Function CN1 HD Audio Connecter CN4 SO-DIMM Connector CN6 LVDS Connecter CN7 Panel Inverter Connecter CN8 VGA Connecter COM3 RS422/RS485 Select (JP3) CN9 USB Port0/1 Connecter Setting Function CN10 USB Port2/3 Connecter 1~2 RS-485 (default) CN12 Front Panel Connecter 2~3 CN13 Buzzer Connecter CN15 SATA Connecter CN16 COM1~COM2 Connecter PCM-3362 Startup Manual 2 1 2 3 1 2 3 2 3 RS-422 1 2 3 1 Jumpers and Connectors Locating Connectors and Jumpers PCI I/O Voltage Select (JP4) Setting Function 1~2 5 V (default) 2~3 3.3 V 1 2 3 1 2 3 Software Installation The CD disc contains a driver installer program that will guide you through the installation of various device drivers needed to take full advantage of your CPU card. Caution! The computer is provided with a battery-powered Real-time Clock circuit. There is a danger of explosion if the battery is incorrectly replaced. Replace only with same or equivalent type recommended by the manufacturer. Discard used batteries according to manufacturer’s instructions. Figure 1: PCM-3362 Location Connectors & Jumpers (component side) Safety Information This device complies with the requirements in Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Figure 2: PCM-3362 Location Connectors & Jumpers (solder side) PCM-3362 Startup Manual Mechanical Drawings Figure 3: PCM-3362 Mechanical Drawing (component side) Figure 4: PCM-3362 Mechanical Drawing (solder side) PCM-3362 Startup Manual