Packing List Specifications Before you begin installing your card, please make sure that the following materials have been shipped: Standard SBC Functions • CPU: Socket 479 Intel® Core™ 2 Duo/Core™ Duo/ Core™ Solo up to 2.16GHz 533/667 MHz FSB • AIMB-554 Core™ 2 Duo/Core™ Duo/Core Solo processor based industrial motherboard • BIOS: Award 4 Mb flash memory BIOS • 1 AIMB-554 startup manual • System Memory: Up to 2 GB; two 240-pin DIMM sockets. Supports single channel DDR2 400/533/667 SDRAM. • 1 CD with driver utility and manual • Chipset: Intel 945GM with ICH7M-DH • 1 FDD cable p/n:1700340640 • 2 Ultra ATA 66/100 HDD cables p/n: 1701400452 • 2 Serial ATA HDD data cable p/n: 1700071000 • 2 Serial ATA HDD power cable p/n: 1703150102 • SATA / IDE Interface: Two onboard serial ATA connectors with a data transmission rate of up to 150 MB/s, and supports up to two devices with software Serial ATA RAID 0,1. One on-board IDE connector supporting up to two enhanced IDE devices. Supports PIO mode 4 (16.67 MB/s data transfer rate) and ATA 33/66/100 (33/ 66/100 MB/s data transfer rate) BIOS enabled/disabled. • 1 ATX 12 V power converter cable p/n:170304015K • FDD interface: Supports one FDD • 1 COM port cable kit p/n: 1701090401 • 1 I/O port bracket p/n: 1962015680 • Parallel port: One parallel port, supports SPP/EPP/ ECP mode • 1 jumper package p/n: 9689000068 • Keyboard/mouse connector: Supports one standard PS/2 keyboard and mouse • 1 warranty card p/n: 2190000902 • 1 Fan sink for Socket 479 p/n:1750000348 If any of these items are missing or damaged, contact your distributor or sales representative immediately. Note: Acrobat Reader is required to view any PDF file. Acrobat Reader can be downloaded at: www.adobe.com/Prodindex/acrobat/readstep.html (Acrobat is a trademark of Adobe). • Serial ports: Two serial ports, COM1 is of RS 232; COM2 is of RS 232/422/485. • Watchdog timer: 255 level timer intervals • USB 2.0: Supports up to eight USB 2.0 ports, 4 external ports and 4 onboard pin headers Graphic Interface • Controller: Chipset integrated VGA controller • Display memory: Dynamically shared system memory up to 224 MB. • CRT: Up to 2048x1536 resolution, 400MHz RAMDAC • LVDS interface: Support up to UXGA(1600X1200) • TV-Out: NTSC/PAL • PCI-Express X16 slot For more information on this and other Advantech products, please visit our website at: The AIMB-554 can provide a LVDS display, and you can use the relative accessories to install LVDS display as below. • 15” 1024X768 Panel p/n: 1330000018 • Inverter p/n: 1250000007 http://www.advantech.com/eplatform • LCD cable p/n: P-CBIV105204202 For technical support and service, please visit our support website at: • Power cable p/n: P-CBLC320140501 http://www.advantech.com Ethernet Interface http://www.advantech.com/support This manual is for the AIMB-554 series Rev. A1 Part No. 2002055410 Printed in Taiwan 1st Edition August 2006 • Single 10/100/1000Base-T: Intel® 82573 • Dual 10/100/1000Base-T: Intel® 82573 x 2 Mechanical and Environmental • Dimensions (L x W): 244 x 244 mm • Power supply voltage: +5 V, ± 12 V AIMB-554 Startup Manual 1 AIMB-554 Socket 479 Intel Core™ 2 Duo/Core™ Duo/Core™ Solo Processor-based 533/667 MHz FSB Micro ATX AIMB-554 Socket 479 Intel Core™ 2 Duo/Core™ Duo/ Core™ Solo Processor-based 533/667 MHz FSB Micro ATX Motherboard with PCI-E, DDR2, and Dual GbE LAN • Power requirements: Maximum: +5 V at 2.4A, +3.3V at 3A, +12V at 1.3A Intel Core Duo 2GHz (667 MHz FSB), 2 x 1GB DDR2 667 SDRAM) • Operating temperature: 0 ~ 60° C (depending on CPU) J1: Clear CMOS Pins Result 1-2 Keep CMOS data* 2-3 Clear CMOS data • Weight: 0.5 kg (weight of board) Connectors and Jumpers The board has a number of connectors and jumpers that help to configurethe system to suit your application requirements. The tables below lists the function of each of the connectors and jumpers. Connectors Label CN1 CN3 CN4 CN6 CN7 CN9 CN10 CN11 CN12 CN13 CN14 CN15 CN16 CN17 CN18 CN19 CN21 CN22 CN29 CN31 CN32 CN37 CN55 CN56 CN57 CN59 CN62 CN63 CN64 CN65 SMBUS2 SA0 SA1 VCN1 VCN2 VP1 ATX1 ATX2 Function Primary IDE connector Floppy drive connector Parallel port, Parallel port x 1, supports SPP/EPP/ECP mode USB 4,5 (to Front Panel) VGA connector Serial port: COM1; RS-232 (D-sub 9-pin connector) Serial port: COM2; RS-232 (9-pin connector) PS/2 keyboard / mouse connectors External PS/2 keyboard / mouse connectors Infrared connector CPU FAN connector System FAN connector Power LED / keyboard lock connector External speaker connector Reset connector HDD LED connector ATX soft power switch (PS_ON) "HW Monitor Alarm Close: Enable OBS Alarm Open: Disable OBS Alarm SNMP-1000 SM Bus connector LAN1; USB ports 0, 1 LAN2; USB ports 2, 3 System FAN connector 2 Line Out, Mic IN connector CD IN (Audio input from CD-ROM) AUX-IN connector Front Panel audio connector Alarm board connector USB ports 6, 7 (to Front Panel) Caseopen Pin Header Front LAN LED connector SMBus Extend connector Serial ATA1 Serial ATA2 TV-OUT connector LVDS connector LCD Inverter Power connector ATX 12 V auxiliary power connector (for CPU) 24-pin ATX power connector J13: COM2 RS 232/422/485 Mode Selector Users can use JP1 to select among RS 232/422/485 modes for COM2 (CN10). The default setting is RS 232. J16: LCD Power 3.3V/5V Selector Closed pins Result 1-2 3.3V 2-3 5V 3.3V 1 - 2 closed 5V 2 - 3 closed J12: ATX, AT mode selector Closed Pins Result 1-2 AT Mode 2-3 ATX Mode AT Mode 1 - 2 closed ATX Mode 2 - 3 closed 2 AIMB-554 Startup Manual CN32 CN31 CN55 CN7 CN9 CN11 CN59 CN4 PCI2 PCI1 J16 CN37 VCN1 VP1 CN56 VCN2 CN57 CN65 PCIE-4X PCIE-16X DIMM2 DIMM1 CN6 CN63 J11 SMBUS2 CN14 J1 SA0 CN13 CN10 J2 CN22 CNX1 J13 SA1 CN12 CPU1 CN1 CN15 CN3 ATX2 ATX1 J12 CN62 Board Layout: Jumper and Connector Locations AIMB-554 Startup Manual 3 Software Installation The CD disc contains a driver installer program that will lead you through the installation of various device drivers needed to take full advantage of your motherboard Caution The computer is supplied with a battery-powered Real-time Clock circuit. There is a danger of explosion if battery is incorrectly replaced. Replace only with same or equivalent type recommended by the manufacturer. Discard used batteries according to manufacturer's instructions. 4 AIMB-554 Startup Manual Specifications This device complies with the requirements in Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference 2. This device must accept any interference received, including interference that may cause undesired operation