DATA SHEET NEC's 1 W UPG2030TK ULTRA SMALL SPDT SWITCH FEATURES DESCRIPTION • NEC's UPG2030TK is a GaAs MMIC L, S-band SPDT (Single Pole Double Throw) switch for mobile phone and L, S-band applications. SWITCH CONTROL VOLTAGE: Vcont (H) = 2.7 to 3.0 V (2.8 V TYP.) Vcont (L) = −0.2 to +0.2 V (0 V TYP.) • This device has low insertion loss and high isolation, and can operate from 0.5 to 3 GHz at 2.7 to 3.0 V. LOW INSERTION LOSS: 0.25 dB TYP. @ 0.5 to 1.0 GHz This device is housed in a 6-pin low profile, Pb-Free minimold package and this package is also suitable for high-density surface mounting. 0.30 dB TYP. @ 1.0 to 2.0 GHz 0.35 dB TYP. @ 2.0 to 2.5 GHz • HIGH ISOLATION: 27 dB TYP. @ 0.5 to 2.0 GHz 24 dB TYP. @ 2.0 to 2.5 GHz • POWER HANDLING: Pin (0.1 dB) = +27.0 dBm TYP. @ 2.0 GHz, Vcont = 2.8 V/0 V Pin (1 dB) = +30.0 dBm TYP. @ 2.0 GHz, Vcont = 2.8 V/0 V (Reference value) APPLICATIONS • CELLULAR AND CORDLESS HANDSETS • PCS, BLUETOOTH™, WLAN, AND WLL • SHORT RANGE WIRELESS • HIGH-DENSITY SURFACE MOUNTING: 6-pin minimold package (1.5 × 1.1 × 0.55 mm) • PB-FREE ORDERING INFORMATION PART NUMBER PACKAGE MARKING UPG2030TK-E2-A 6-pin lead-less minimold (1511) G3R SUPPLYING FORM • Embossed tape 8 mm wide • Pin 1, 6 face the perforation side of the tape • Qty 5 kpcs/reel Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: UPG2030TK-A California Eastern Laboratories UPG2030TK PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM (Top View) 2 3 G3R 1 (Top View) 6 1 5 6 2 4 (Bottom View) 5 3 4 6 1 5 2 4 3 PIN NO. PIN NAME 1 OUTPUT1 2 GND 3 OUTPUT2 4 Vcont2 5 INPUT 6 Vcont1 TRUTH TABLE VCONT1 VCONT2 INPUT−OUTPUT1 INPUT−OUTPUT2 Low High ON OFF High Low OFF ON ABSOLUTE MAXIMUM RATINGS (TA =+25ºC, unless otherwise specified) PARAMETER Switch Control Voltage SYMBOL RATINGS UNIT Vcont 6.0 V Input Power Pin +33 dBm Operating Ambient Temperature TA −45 to +85 °C Storage Temperature Tstg −55 to +150 °C RECOMMENDED OPERATING RANGE (TA =+25ºC, unless otherwise specified) SYMBOL MIN. TYP. MAX. UNIT Switch Control Voltage (H) PARAMETER Vcont (H) 2.7 2.8 3.0 V Switch Control Voltage (L) Vcont (L) −0.2 0 0.2 V UPG2030TK ELECTRICAL CHARACTERISTICS (TA = +25°C, Vcont = 2.8V/0 V , DC blocking capacotors = 56 pF, unless otherwise specified) MIN. TYP. MAX. UNIT Insertion Loss 1 PARAMETER SYMBOL LINS1 f = 0.5 to 1.0 GHz − 0.25 0.45 dB Insertion Loss 2 LINS2 f = 1.0 to 2.0 GHz − 0.30 0.50 dB Insertion Loss 3 LINS3 f = 2.0 to 2.5 GHz − 0.35 0.55 dB Isolation 1 ISL1 f = 0.5 to 2.0 GHz 23 27 − dB Isolation 2 ISL2 f = 2.0 to 2.5 GHz 20 24 − dB Input Return Loss RLin f = 0.5 to 2.5 GHz 15 20 − dB Output Return Loss RLout f = 0.5 to 2.5 GHz 15 20 − dB +25.5 +27.0 − dBm +25.5 +27.0 − dBm − 4 20 μA − 50 500 ns 0.1 dB Gain Compression Input Power Note Pin (0.1 dB) f = 2.0 GHz f = 2.5 GHz Switch Control Current Icont Switch Control Speed Notes TEST CONDITIONS No signal tSW Pin (0.1 dB) is the measured input power level when the insertion loss increases 0.1 dB more than that of linear range. STANDARD CHARACTERISTICS FOR REFERENCE (TA = +25°C, Vcont = 2.8 V/0 V, DC blocking capacitors = 56 pF, unless otherwise specified) PARAMETER SYMBOL 1 dB Gain Compression Input Power Note Notes Pin (1 dB) TEST CONDITIONS f = 2.0 GHz MIN. TYP. MAX. UNIT − +30.0 − dBm Pin (1 dB) is the measured input power level when the insertion loss increases 1 dB more than that of linear range. Caution It is necessary to use DC blocking capacitors with this device. The value of DC blocking capacitors should be chosen to accommodate the frequency of operation, bandwidth, switching speed and the condition with the actual board of your system. The range of recommended DC blocking capacitor value is less than 100 pF for frequencies above 0.5 GHz, and 1,000 pF for frequencies below 0.5 GHz. UPG2030TK EVALUATION CIRCUIT (Vcont = 2.8 V/0 V, DC blocking capacitors = 56 pF) Vcont1 INPUT Vcont2 56 pF 1000 pF 1000 pF 6 5 4 1 2 3 56 pF OUTPUT1 56 pF OUTPUT2 The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. UPG2030TK G3R ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD USING THE NEC EVALUATION BOARD SYMBOL C1, C2, C3 C4, C5 VALUES 56 pF 1000 pF UPG2030TK TYPICAL CHARACTERISTICS (TA = +25°C, Vcont = 2.8 V/0 V, DC blocking capacitors = 56 pF, unless otherwise specified) INPUT-OUTPUT2 INSERSION LOSS vs. FREQUENCY 0.5 0.4 0.4 0.3 0.3 Insersion Loss LINS (dB) 0.5 0.2 0.1 0 -0.1 -0.2 -0.3 0.2 0.1 0 -0.1 -0.2 -0.3 -0.4 -0.4 -0.5 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 -0.5 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 Frequency f (GHz) Frequency f (GHz) INPUT-OUTPUT1 ISOLATION vs. FREQUENCY INPUT-OUTPUT2 ISOLATION vs. FREQUENCY 50 40 40 30 30 Isolation ISL (dB) 50 20 10 0 -10 -20 20 10 0 -10 -20 -30 -30 -40 -40 -50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 -50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 Frequency f (GHz) Frequency f (GHz) INPUT-OUTPUT1 INPUT RETURN LOSS vs. FREQUENCY INPUT-OUTPUT2 INPUT RETURN LOSS vs. FREQUENCY 50 50 40 40 Input Return Loss RLin (dB) Input Return Loss RLin (dB) Isolation ISL (dB) Insersion Loss LINS (dB) INPUT-OUTPUT1 INSERSION LOSS vs. FREQUENCY 30 20 10 0 -10 -20 -30 30 20 10 0 -10 -20 -30 -40 -40 -50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 -50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 Frequency f (GHz) Remark The graphs indicate nominal characteristics. Frequency f (GHz) UPG2030TK TYPICAL CHARACTERISTICS (TA = +25°C, Vcont = 2.8 V/0 V, DC blocking capacitors = 56 pF, unless otherwise specified) INPUT-OUTPUT2 OUTPUT RETURN LOSS vs. FREQUENCY 50 50 40 40 Output Return Loss RLout (dB) Output Return Loss RLout (dB) INPUT-OUTPUT1 OUTPUT RETURN LOSS vs. FREQUENCY 30 20 10 0 -10 -20 -30 -40 -50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 30 20 10 0 -10 -20 -30 -40 -50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 Frequency f (GHz) Frequency f (GHz) OUTPUT POWER vs. INPUT POWER OUTPUT POWER vs. INPUT POWER 40 40 f = 1.0 GHz f = 2.5 GHz 35 Output Power Pout (dBm) Output Power Pout (dBm) 35 30 25 20 15 10 5 0 10 30 25 20 15 10 5 15 20 25 30 35 40 Input Power Pin (dBm) Remark The graphs indicate nominal characteristics. 0 10 15 20 25 30 Input Power Pin (dBm) 35 40 UPG2030TK PACKAGE DIMENSIONS 0.48±0.05 0.48±0.05 6-PIN LEAD-LESS MINIMOLD (1511) (UNIT:mm) Remark ( ) : Reference value UPG2030TK RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Soldering Conditions Condition Symbol Infrared Reflow Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220°C or higher Preheating time at 120 to 180°C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) : 260°C or below : 10 seconds or less : 60 seconds or less : 120±30 seconds : 3 times : 0.2%(Wt.) or below IR260 VPS Peak temperature (package surface temperature) Time at temperature of 200°C or higher Preheating time at 120 to 150°C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) : 215°C or below : 25 to 40 seconds : 30 to 60 seconds : 3 times : 0.2%(Wt.) or below VP215 Wave Soldering Peak temperature (molten solder temperature) Time at peak temperature Preheating temperature (package surface temperature) Maximum number of flow processes Maximum chlorine content of rosin flux (% mass) : 260°C or below : 10 seconds or less : 120°C or below : 1 time : 0.2%(Wt.) or below WS260 Partial Heating Peak temperature (pin temperature) Soldering time (per side of device) Maximum chlorine content of rosin flux (% mass) : 350°C or below : 3 seconds or less : 0.2%(Wt.) or below HS350 Caution Do not use different soldering methods together (except for partial heating). 08/30/2004 A Business Partner of NEC Compound Semiconductor Devices, Ltd.