TNC Series TNC Type Connectors ●TNC series is screw coupling type connectors produced by modifying the connection method of BNC series. ●Connection is strong mechanically and strong against outer vibration, and less high frequency leakage, as the connection is made by screw coupling. ●Electrical and mechanical performance are based on BNC series. Note : TNC series is intermateable with TNC75 series.(75Ω group) CONFORMING STANDARD MIL-C-39012 SPECIFICATION Characteristic Impedance 50Ω Dielectric withstanding voltage 1500V AC (rms) for 1 minute Insulation resistance 1000MΩmin. at 500V DC Contact resistance 3mΩ max. VSWR 1.3max. at 2GHz Specifications depends on each connector although these are basic specifications. MATERIAL/FINISH Shell (Body) Copper alloy/Silver or Nickel plating Contact (male) Copper alloy/Silver or Gold plating Contact (female) Copper alloy/Silver or Gold plating Insulators PTFE Gaskets Silicone rubber The performance may differ depending on the specification. ● 1 ● TNC Series Unit : mm ■ Plug Clamp Type P/N TNC-P-3 (L) TNC-P-58U φA P/N TNC-SP-5 (L) TNC-SP-5D2W φ17.5 TNC-SP-5DSFA P/N TNC-SP-5DFAE Applicable Cable 3D-2V 3D-QEV RG-58/U RG-55/U Applicable Cable 5D-2V 5D-QEV 5D-2W 5D-2BW1 5D-SFA 5D-SFA(PE) (L) Finish Shell Contact 25.0 Ag Ag 26.0 Ag Ag φA (L) 17.5 Finish Shell Contact 34.0 Ni Au 19.0 37.3 Ni Au 17.5 34.0 Ni Au Finish Applicable Cable Shell Contact 5D-FAE Ni Au Applicable Cable Shell Contact 8D-SFA Ni Au Applicable Cable Shell Contact 5D-FB Ni Ag φ19.5 (34) P/N TNC-SP-8DSFA Finish φ17.5 (50) P/N TNC-P-5DFB-1 (50) ● 2● Finish TNC Series Unit : mm ■ Plug Crimp Type Applicable Cable φA P/N TNC-P-1.5D2V-CR10 Ｌ TNC-P-1.5DQEW TNC-P-2.5D2V-CR10 TNC-P-2.5D2W-CR10 1.5D-2V 1.5D-QEV 1.5D-2W 1.5D-QEW 2.5D-2V 2.5D-QEV 2.5D-2W 2.5D-QEW 3D-2V TNC-P-3D2V-CR10 TNC-P-3D2W-CR10 3D-QEV 3D-2W 3D-QEW TNC-P-5D2V-CR10 5D-2V φA P/N TNC-P-2DFB-1 L φA P/N 23.3 Ni Ag CR-H-1120A Deltamate 5.5 22.3 Ni Au CR-H-1100 ー 5.5 24.3 Ni Ag CR-H-1119 Deltamate 6.3 24.3 Ni Ag CR-H-1115 Deltamate 7.1 24.3 Ni Ag CR-H-1116 Deltamate 7.9 24.3 Ni Ag CR-H-1135 Deltamate 9.5 28.7 Ni Ag CR-H-1130 Deltamate 4.0 Applicable Cable φA L 2D-FB 6.2 Finish Shell Contact Hand Crimp Tool P/N 29.7 Ni Au CR-H-1105 4.8 30 Ni Au CR-H-1156A 1.5D-HQ SUPER 4.8 30 Ni Au CR-H-1156A Applicable Cable φA L Shell Contact Hand Crimp Tool P/N 6.2 24.0 Ni Au CR-H-13982 2.4DS-FXLV Finish TNC-SP-2DFU-CR1 2D-FU 6.2 24.0 Ni Au CR-H-13982 TNC-SP-3DFXL-CR1 3D-FXL 7.0 28.0 Ni Au CR-H-14451 9.5 28.5 Ni Au CR-H-16768 P/N φ9.5 Note 2D-FB TNC-SP-2DFB-CR1 TNC-SP-5DSQFB-CR1 33.8 Hand Crimp Tool P/N 1.5D-QEW TNC-SP-1.5DHQS-CR1 L Contact L 1.5D-2W TNC-SP-1.5DW-CR1 Finish Shell φA TNC-SP-5DSFA-CR1 5D-SQFB CECX-5D-FB Applicable Cable 5D-SFA 5D-SFA(PE) ● 3● Finish Shell Contact Hand Crimp Tool P/N Ni Au CR-H-16768 TNC Series Unit : mm ■ Plug φ7 φ14.5 Semi-Rigid and Semi-Flexible Cable Type (21) P/N TNC-SP-141-SO TNC-SP-141-SO-D1 Applicable Cable UT-141A FCCAVGO UT-141A FCCAVGO ● 4 ● Finish Shell Contact Ag Ag Ni Au TNC Series Unit : mm ■ Right Angle Plug 27.5 P/N TNC-LP-58U-CR1 Finish Applicable Cable Shell Contact RG-58/U Ag Ag Applicable Cable Shell Contact Hand Crimp Tool P/N Ni Au CR-H-16768 φ6.3 (27.5) 27 P/N TNC-LP-5DSQFBCR1 5D-SQFB CECX-5D-FB φ9.5 (29) ● 5 ● Finish TNC Series Unit : mm ■ Jack φ17.5 Clamp Type P/N TNC-SJ-5DSFA φ19.5 (36.6) P/N TNC-SJ-8DSFA Applicable Cable 5D-SFA 5D-SFA(PE) Finish Shell Contact Ni Au Finish Applicable Cable Shell Contact 8D-SFA Ni Au (49) ● 6 ● TNC Series Unit : mm ■ Jack Crimp Type φA φC P/N TNC-J-1.5D-CR10 L TNC-J-1.5DXW-CR10-120 TNC-J-1.5DQEW-CR10 TNC-SJ-2DFB-CR1 TNC-J-2.5DV-CR1 TNC-J-2.5D2W-CR10 TNC-SJ-3DFXL-CR1 P/N φA φC TNC-SJ-5DSQFB-CR1 TNC-J-3D2V-CR10 5.0 17.0 L φ12 φ8 φ3.4 TNC-J-3D2W-CR10 21 P/N TNC-SJ-188AU-CR1 φA 28 P/N 11 L Applicable Cable 1.5D-2V 1.5D-QEV 1.5D-XWTA 1.5D-2W 1.5D-QEW 2D-FB 2D-FBV 2.5D-XFV 2.5D-QEV 2.5D-2W 2.5D-QEW 3D-FXL 3D-SQFB 5D-SQFB CECX-5D-FB Applicable Cable 3D-2V 3D-QEV 3D-2W 3D-QEW Applicable Cable RG-188A/U F-MF Applicable Cable φA φC L 4.0 12.0 5.5 Finish Hand Crimp Tool P/N Shell Contact 26.8 Ni Ag CR-H-1101 12.0 26.8 Ni Ag CR-H-1142 5.5 12.0 26.8 Ni Ag CR-H-1100 6.2 12.0 26.2 Ni Au CR-H-13982 5.9 12.0 25.0 Ni Au CR-H-1163 6.25 14.6 25.0 Ni Ag CR-H-1105 7.0 14.5 27.8 Ni Au CR-H-14451 9.5 14.5 31.0 Ni Au CR-H-16768 φA φC L Shell Contact Hand Crimp Tool P/N 7.1 14.6 25.42 Ni Ag CR-H-1102 7.9 14.6 25.42 Ni Ag CR-H-1135 Finish Finish Shell Contact Ni Au φA L Finish Shell Contact Hand Crimp Tool P/N TNC-SJ-2.5DVS-CR1 2.5D-2VS 5.9 28 Ni Au CR-H-1163 TNC-SJ-5DSFA-CR1 5D-SFA(PE) 9.5 33 Ni Au CR-H-16768 ● 7 ● TNC Series Unit : mm ■ Bulkhead Jack 13 Hex. Applicable Cable φB φA P/N 2 16.8 TNC-BJ-2.5DQEW B L Shell Hand Crimp Contact Tool P/N 14.0 6.25 27.9 Ni Ag CR-H-1105 14.0 26.8 Ni Au CR-H-1163 TNC-BJ-58U-CR10 RG-58A/U 14.0 6.25 28.3 Ni Ag CR-H-1105 10.2 L TNC-BJ-2.5DVS-CR1 Mounting Hole 2.5D-2W Finish A 2.5D-QEW 2.5D-2VS 2.5DS-QEHV(TA) 5.9 -0 φ1 1.2 + 0 . 1 ※ Panel Thickness 2.7mm Max. +0.1 15 2 9.7 13 16.8 Applicable Cable P/N TNC-BJ-1.5DW-CR1 30.1 1.5D-2W 1.5D-QEW ※ Panel Thickness 2.7mm Max. 11 .2 +0 0 .1 Mounting Hole φ φ14 φ4.8 10.4 -0 +0.1 9.9 0 ● 8 ● Finish Shell Contact Hand Crimp Tool P/N Ni Au CR-H-1156A TNC Series Unit : mm ■ Panel Jack Crimp Type 4-φ3.0 φ5.5 12.7 P/N TNC-PJ-1.5DQEW-CR10 2.3 12.7 15.8 Applicable Cable 1.5D-QEW 1.5D-2W Finish Shell Contact Hand Crimp Tool P/N Ni Ag CR-H-1142 □ 17.5 26.8 Mounting Hole 12.7 4-φ3 φ12.0 12.7 4-M2.5 × 0.45 18.2 φ5.5 P/N 2.3 15.8 TNC-PJ-1.5DXW-CR10-M Applicable Cable 1.5D-XW 1.5D-XWTA Finish Shell Contact Hand Crimp Tool P/N Ni Ag CR-H-1100 Shell Contact Hand Crimp Tool P/N Ni Ag CR-H-1101 18.2 30.8 □ 25.4 Mounting Hole 18.2 4-φ3.0 φ12.0 18.2 2-φ3.2 2.3 23.4 18 φ4 P/N TNC-PJ-2H-1.5D-CR10 14.7 12 24.4 Mounting Hole 18.0 2-φ3.2 φ6.0 ● 9● Applicable Cable 1.5D-QEV 1.5D-2V Finish TNC Series Unit : mm ■ Panel Jack Semi-Rigid and Semi-Flexible Cable Type 4- φ 3 28 φ 15.24 φ12.64 φ10 P/N 2.4 14.6 3.5 28.35 TNC-PJ-85-SO-3 15.24 □ 21.5 Mounting Hole 15.24 ± 0.1 4-φ3.0± 0.1 ± 0.2 φ10.5 15.24 ± 0.1 ● 10 ● Applicable Cable FCCAVG1 UT-85 Finish Shell Contact Ni Au Note with flange and O ring TNC Series Unit : mm ■ Receptacle 4-M2.6 × P0.45 12.7 φ1.4 P/N 2.3 15.8 12.7 Finish Shell Contact TNC-R Ag Au TNC-R-NiAU Ni Au □ 17.5 26.3 Mounting Hole ± 0.15 12.7 ± 0.2 4-φ2.8 +0.2 φ11.0-0 12.7 ± 0.2 4-φ3.0 12.7 φ1.4 P/N 15.8 2.3 12.7 □ 17.5 26.3 Contact TNC-R2 Ag Ag TNC-R2-Ni Ni Ag TNC-R2-NiCAu Ni Au Mounting Hole 12.7 4-φ3.0 φ11.1 Finish Shell 12.7 ● 11 ● TNC Series Unit : mm ■ Receptacle 2-φ3.0 18 26.3 23.3 φ1.4 P/N TNC-R2-2H-Ni Finish Shell Contact Ni Ag 11 Mounting Hole 18.0 2-φ3.1 φ9.0 4-φ3 4 9.6 2.3 TNC-SR-3 Finish Shell Contact Ni Au 12.7 □ 17.5 15.8 27.7 Mounting Hole +0.1 12.7 ± 0.05 4-φ3 -0 +0.1 φ12.0 -0 12.7 ± 0.05 4φ 3 12.7 P/N TNC-SR-6 φ1.27 φ4 2 17.8 6.8 12.7 2 26.6 □ 17.5 Mounting Hole 4-φ3.1 +0.1 -0 12.7 ± 0.05 φ1.7 12.7 φ5.4 P/N +0.1 φ4.1 -0 12.7 ± 0.05 ● 12 ● Finish Shell Contact Ni Au TNC Series Unit : mm ■ Receptacle 4-φ3 TNC-SR-9 φ12.7 φ4 12.7 P/N 8.5 Shell Contact Ni Au 12.7 2 17.8 Finish □ 17.5 2 28.3 Mounting Hole 4-φ3.1 +0.1 φ4.1 12.7 ± 0.05 -0 +0.1 -0 12.7 ± 0.05 ■ Plug Receptacle 2.3 P/N 12.7 φ14.6 φ2.29 φ1.1 4-φ3 TNC-PR 18.0 Finish Shell Contact Ag Ag 12.7 28.5 □ 17.5 Mounting Hole 12.7 4-φ3.1 φ11.1 12.7 ■ Right Angle Receptacle 23 14.3 12.7 2.3 23 □ 17.5 12.7 φ1.1 φ2.27 P/N Finish Shell Contact TNC-LR Ag Au TNC-LR-Ni Ni Ag 4-φ3 21.6 2.3 5 4-M2.6 P/N 12.7 φ1.1 φ2.29 23.1 14.3 TNC-LR-1 12.7 □ 17.5 ● 13 ● Finish Shell Contact Ag Ag