Model X0060L5050AHF Rev A Ultra Low Profile 0603 RF Crossover Description The (patent pending) X0060L5050AHF is an ultra-small low profile crossover that enables the transition of two intersecting RF traces in an easy to use industry standard SMT package. The 0603 crossover is ideal for any critical applications where layout and available space are a premium and resorting to addition PWB layers and larger overall footprints are unacceptable. With low insertion loss and high isolation packaged with cost in mind, this novel component delivers. Detailed Electrical Specifications*: Specifications subject to change without notice. ROOM (25°°C) Features: • • • • • • • • • • • Parameter 0 –6000 MHz. 0.7mm Height Profile 50 Ohm RF-RF Crossover All Wireless Frequencies Low Insertion Loss High Isolation Surface Mountable Tape & Reel Non-conductive Surface RoHS Compliant Halogen Free Min. Frequency Port Impedance Return Loss Insertion Loss Isolation (cross-talk) 0 – 700 MHz 700 - 1700 MHz 1700 - 2200 MHz 2200 - 3000 MHz 3000 - 6000 MHz Power Handling Operating Temperature Typ. 0 Max Unit 6000 0.15 MHz Ω dB dB 2 +85 dB dB dB dB dB Watts ºC 50 19 0.1 16 45 40 39 37 27 53 47 46 43 31 -55 Outline Drawing TOP VIEW (Near Side) 1.59±0.10 SIDE VIEW BOTTOM VIEW (Far Side) 0.67±0.07 1 2 4x 0.29 3 Orientation Marker Denotes Pin Location 2x 0.16 6 Orientation Marker Denotes Pin Location Mechanical Outline -Dimensions are in Millimeters 6x 0.20 6x 0.52 0.84±0.10 4x 0.50 Pin 1 2 3 4 5 6 5 4 6x 0.25 Designation GND RF 2 In/Out GND RF 1 In/Out RF 2 In/Out RF 1 In/Out Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model X0060L5050AHF Rev A Typical Broadband Performance: 0 GHz. to 4.5GHz. S11 S12 0 0 -3 -0.1 -6 -0.2 -9 -0.3 -12 -0.4 [dB] [dB] -15 -18 -21 -0.5 -0.6 -24 -0.7 -27 Frequency [MHz] Frequency [MHz] Isolation 0 -5 -10 -15 -25 -30 -35 -40 -45 6000 5500 5000 4500 4000 3500 3000 2500 2000 1500 1000 -50 500 [dB] -20 Frequency [MHz] Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 6000 5500 5000 4500 4000 3500 3000 2500 2000 1500 1000 6000 5500 5000 4500 4000 3500 3000 2500 2000 1500 -1 1000 -0.9 -36 500 -33 500 -0.8 -30 Model X0060L5050AHF Rev A Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from ceramic filled PTFE composites which possess excellent electrical o and mechanical stability having X and Y thermal coefficient of expansion (CTE) of 17 ppm/ C. An example of the PCB footprint used in the testing of these parts is shown on below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. Dimensions are in Millimeters Mounting Footprint Circuit Pattern Footprint Pad (s) Solder Resist 3x Transmission lines 12x .04 Plated thru holes to ground 6x .31 3x .21 PART ORIENTATION TOP DOWN 12x .04 6x .36 4x .14 Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model X0060L5050AHF Rev A Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. See Model Numbers below for further ordering information. Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282