Download Data Sheet

PSB40FMA42 SERIES
Up to 46 Watts
AC/DC LED Driver
Single Outputs
Rev A
FEATURES
•
•
•
•
Input Voltage Range of 108~305VAC • Over Temperature, Over Current, Over
Voltage and Short Circuit Protection
Up to 46 Watts of Output Power
• High Efficiency
Built-In Active PFC Function
Suitable for LED lighting applications • UL8750 and UL60950 Safety Approvals
DESCRIPTION
The PSB40FMA42 series of AC/DC LED drivers offers up to 46 watts of output power in
a 4.33” x 2.74” x 1.3” package. This series has an input voltage range of 108~305VAC
and single outputs ranging from 32V to 42V. Features of this series include high
efficiency and built in active PFC function. This series has over temperature, over
current, over voltage, and short circuit protection and meets UL8750 and UL60950
safety approvals. Please call factory for order details.
Size: 4.33in x 2.74in x 1.3in (110mm x 69.5mm x 33mm)
MODEL SELECTION TABLE
Model Number
PSB40FMA42-0850C
PSB40FMA42-1100C
Input Voltage Range
108~305VAC
Output Voltage
32~42V
32~42V
Rated Current
850mA ±5%
1100mA ±5%
Ripple & Noise
4.2V max.
4.2V max.
Rated Power
35.7W
46.0W
Efficiency
88% typ.
88% typ.
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
INPUT SPECIFICATIONS
Input Voltage Range
108
305
VAC
Normal Voltage
120
277
VAC
Frequency Range
47
63
Hz
AC Current
@120VAC/60Hz, Rated Power
0.58
A
Inrush Current
@277VAC/60Hz (For Lighting)
30
A
Power Factor
@277VAC/60Hz (For Lighting)
0.90
Leakage Current
@230VAC/50Hz (For Lighting)
0.5
mA
Input THD
@277VAC/60Hz (For Lighting)
20
%Athd
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Output Power
See Table
Output Current
See Table
Ripple & Noise
4.2
V
Start Up Time
@120VAC/60Hz (Lighting)
1000
mS
PROTECTION
Short Circuit Protection
Hiccup Mode
Recovers after fault conditions disappears
Over Current Protection
Constant Current Limit
Recovers after fault condition is removed
Over Voltage Protection
Constant Voltage Limit
Over Temperature Protection
Hiccup or shut down output voltage
Recovers after fault condition disappears
No Load Operation
No parts damaged on power supply
ENVIRONMENTAL SPECIFICATIONS
Operating Case Temperature
-40
90
ºC
(Tcase)
Storage Temperature
-40
90
ºC
Operating Humidity
Non-Condensing
10
90
%RH
Storage Humidity
5
90
%RH
Cooling
Free Air Convection
Vibration
10~500Hz, 2G 10min./1 cycle, period for 60 min. each along X, Y, Z axes
GENERAL SPECIFICATIONS
Efficiency
@230VAC/60Hz (Rated Power)
88
%
I/P-O/P
4242
VDC
Withstand Voltage
I/P-FG
2121
VDC
O/P-F/G
500
VAC
Isolation Resistance
@25ºC
>100MΩ/500VDC
5/31/2016
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 1 of 3
PSB40FMA42 SERIES
Up to 46 Watts
AC/DC LED Driver
Single Outputs
Rev A
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
PHYSICAL SPECIFICATIONS
4.33in x 2.47in x 1.3in
(110mm x 69.5mm x 33mm)
10.58oz (300g)
Dimensions (L x W x H)
Weight
SAFETY
Safety Standards
EMI Conduction and Radiation
UL8750, UL60950
FCC Part 15: Class B
*Due to advances in technology, specifications subject to change without notice.
INPUT & OUTPUT WIRES
Port Name
Specifications Description
Length (mm)
GROUND
GREEN,UL 1316 (Solid) 18AWG PVC (NYLON). Ring Terminal
180±15
NEUTRAL
WHITE, UL 1316 (Solid) 18AWG PVC (NYLON)
210±15
LINE
BLACK, UL 1316 (Solid) 18AWG PVC (NYLON)
210±15
POSITIVE
RED, UL 1316 (Solid) 18AWG V PVC (NYLON)
180±15
NEGATIVE
YELLOW, UL 1316 (Solid) 18AWG PVC (NYLON)
180±15
MECHANICAL DRAWINGS
5/31/2016
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 2 of 3
Rev A
PSB40FMA42 SERIES
Up to 46 Watts
AC/DC LED Driver
Single Outputs
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
5/31/2016
(603)778-2300
(888)597-9255
(603)778-9797
[email protected]
www.wallindustries.com
37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 3 of 3