SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) T10B Series - DO-201 Pb e3 RoHS Description T10B Series are SIDACtor® thyristors designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series provides a robust and cost effective throughhole solution that enables equipment to comply with global regulatory standards Features and Benefits • Low voltage overshoot • High Surge Current Rating • Low on-state voltage Agency • RoHS Compliant • Does not degrade surge capability after multiple surge events within limit. Agency Approvals Agency File Number • Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD609A.01) • Fails short circuit when surged in excess of ratings E128662 Pinout Designation Applicable Global Standards Not Applicable Schematic Symbol • TIA-968-A • GR 1089 Intra-building • TIA-968-B • IEC 61000-4-5 2nd edition • ITU K.20/21/45 Enhanced Level • ITU K.20/21/45 Basic Level • YD/T 1082 • YD/T 993 • YD/T 950 • GR 1089 Inter-building Electrical Characteristics Part Number T10B080Bxx T10B110Bxx T10B140Bxx T10B180Bxx T10B220Bxx T10B270Bxx T10B080Exx T10B110Exx T10B140Exx T10B180Exx T10B220Exx T10B270Exx Marking T10B080B T10B110B T10B140B T10B180B T10B220B T10B270B T10B080E T10B110E T10B140E T10B180E T10B220E T10B270E VDRM @lDRM=5µA VS @100V/µs V Min V Max 70 100 120 170 200 240 70 100 120 170 200 240 125 142 178 220 275 370 125 142 178 220 275 370 IH mA Min mA Max 120 120 120 120 120 120 180 180 180 180 180 180 Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Components are bi-directional. - XX Part Number Suffix: ‘RP’ (Reel Pack), Blank (Bulk Pack), or ‘60’ (Type 60 lead form, Bulk Pack) © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/26/16 IS 800 800 800 800 800 800 800 800 800 800 800 800 IT VT @IT=2.2 Amp Capacitance @1MHZ, 2V Bias A Max V Max pF 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 4 4 4 4 4 4 4 4 4 4 4 4 60 55 48 44 41 36 60 55 48 44 41 36 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Surge Ratings IPP Series ITSM 50/60 Hz di/dt A min A min A/µs max 100 30 500 8/20 1.2/502 5/3101 10/7002 10/10001 10/10002 A min A min 250 125 1 B Notes: - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product that remains in thermal equilibrium. - IPP ratings applicable over temperature range of -40ºC to +85ºC - The component must initially be in thermal equilibrium with -40°C < TJ < +150°C 1 Current waveform in µs 2 Voltage waveform in µs Thermal Considerations Package Symbol DO-201AD TJ TS R0JA Parameter Value Unit Operating Junction Temperature Range -40 to +150 °C Storage Temperature Range -65 to +150 °C 120 °C/W Thermal Resistance: Junction to Ambient V-I Characteristics tr x td Pulse Waveform IT IS IH IDRM -V +V VT VDRM VS IPP – Peak Pulse Current – %IPP +I tr = rise time to peak value td = decay time to half value Peak Value 100 Waveform = tr x td 50 Half Value 0 0 td tr t – Time (µs) -I Normalized VS Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature 8 6 25 °C 4 2 IH (TC = 25ºC) IH 10 Ratio of Percent of VS Change – % 2.0 14 12 0 -4 -6 -8 -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – °C 1.8 1.6 1.4 25°C 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 Case Temperature (TC) - ºC © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/26/16 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Soldering Parameters - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (Min to Max) (ts) Pb-Free assembly (see Fig. 1) +150°C +200°C 60-180 secs. Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reflow - Temperature (TL) (Liquidus) +217°C - Temperature (tL) 60-150 secs. Peak Temp (TP) +260(+0/-5)°C Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed +260°C Physical Specifications Lead Material Copper Alloy Terminal Finish 100% Matte-Tin Plated Body Material UL Recognized epoxy meeting flammability classification V-0 © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/26/16 Figure 1 TP tP Critical Zone TL to TP Ramp-up Temperature Reflow Condition TL TS(max) tL Ramp-down Preheat TS(min) tS 25 time to peak temperature (t 25ºC to peak) Time Environmental Specifications High Temp Voltage Blocking 80% Rated VDRM (VAC Peak ) +125°C or +150°C, 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 Temp Cycling -65°C to +150°C, 15 min. dwell, 10 up to 100 cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased Temp & Humidity 52 VDC (+85°C) 85%RH, 504 up to 1008 hrs. EIA/ JEDEC, JESD22-A-101 High Temp Storage +150°C 1008 hrs. MIL-STD-750 (Method 1031) JEDEC, JESD22-A-101 Low Temp Storage -65°C, 1008 hrs. Thermal Shock 0°C to +100°C, 5 min. dwell, 10 sec. transfer, 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker Test) +121°C, 100%RH, 2atm, 24 up to 168 hrs. EIA/ JEDEC, JESD22-A-102 Resistance to Solder Heat +260°C, 30 secs. MIL-STD-750 (Method 2031) Moisture Sensitivity Level 85%RH, +85°C, 168 hrs., 3 reflow cycles (+260°C Peak). JEDEC-J-STD-020, Level 1 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Part Numbering Part Marking T10B xxx x xx Part Marking Code Blank: Bulk Pack RP: Reel Pack MEDIAN VOLTAGE Dimensions - DO-15 HOLDING CURRENT B: 120mA (Revised 11/14/07) E: 180mA XXXXX (Refer to Electrical Characteristics Table) PACKING OPTIONS T10Bxxxx TYPE T10B: SIDACtor T10B series Date Code Dimensions — DO-201AD B L G L T10B Millimeters MIN MAX MIN MAX B 0.028 0.042 0.711 1.067 D 0.190 0.205 4.826 5.207 G 0.360 0.375 9.146 9.527 L 1 25.4 Tape and Reel Specification — DO-201AD Packing Options Package Type Inches Dimension D Description DO-201AD Tape and Reel Pack DO-201AD Bulk Pack Quantity Added Suffix Industry Standard 1000 RP EIA-RS-296-D 500 N/A N/A Off Center Both Side 0.84 (21.33) 2.55 64.8 2.0 50.8 0.35 8.99 0.085 21.6 0.24 6.1 Direction of Feed Additional Information 2.7 68.6 Top View Datasheet Resources Samples Dimensions are in inches/mm Recess Depth Max. 0.75 (19.55) 86.36 3.4 14 355.6 Front View 0.6 15.24 Label © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/26/16