SIDACtor ® Protection Thyristors Broadband Optimized™ Protection SDP Biased Series - SOT23-6 Pb e3 RoHS Description This new SDP Biased series provides overvoltage protection for applications such as VDSL2, ADSL2, and ADSL2+ with minimal effect on data signals. This silicon design innovation results in a capacitive loading characteristic that is compatible with these high bandwidth applications. This surface mount SOT23-6 package provides a surge capability that exceeds most worldwide standards and recommendations for lightning surge withstand capability of tertiary protectors. Features & Benefits • Compatible with VDSL2 (30MHz) and with G.fast (106MHz) Agency Approvals Agency Agency File Number • Balanced overvoltage protection E133083 • Low insertion loss • Low profile 1 6 2 5 • RoHS Compliant • Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD-609A.01) • Low distortion Pinout Designation & Schematic Symbol • Response time under 500ns Applicable Global Standards • ANSI C62.41 • IEC 61000-4-2 level 4 • IEC 61000-4-12 -- 15kV (air discharge) • IEC 61000-4-5, 30A -- 8kV ( contact discharge) (tP=8/20μs) 2nd edition 3 4 Additional Information Datasheet Resources Samples Absolute Maximum Ratings between pin1 and pin 3, Ta= 25ºC (Unless otherwise noted) Part Number SDP0240T023G6RP Marking Ipp Maximum Junction Temperature Storage Temperature Range ºC ºC 8/20µs A Max 150 -65 to 150 30 1 P24 Notes: 1. The device must be in thermal equilibrium at 25ºC Electrical Characteristics between pin 1 and pin 3, Ta = 25°C Part Number Marking SDP0240T023G6RP P24 VDRM IDRM V @1V/µs @IDRM=100nA @VDRM=19V S IH IS Co@f=1MHz,2V Delta Co@ Line Bias = 1 V to 19 V V min pA typ V max mA typ mA min pF max pF max 19 300 29 40 10 3.0 0.5 © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/24/16 SIDACtor ® Protection Thyristors Broadband Optimized™ Protection Typical capacitance against line voltage (without external bias) V-I: Characteristics Capacitance (pF) 2.0 1.5 1.0 0.5 0.0 0 2 4 6 8 10 12 14 Voltage (Volt) Surge Ratings IPP Series 1.2/50µs 1 / 8/20µs 2 A min G 30 Notes: 1 Voltage waveform in µs 2 Current waveform in µs - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product that remains in thermal equilibrium. - The component must be in thermal equilibrium at 25°C. Thermal Information Parameter Rating Units -65 to 150 ˚C Maximum Junction Temperature 150 ˚C Maximum Lead Temperature (Soldering 10s) 260 ˚C Storage Temperature Range © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/24/16 16 18 20 SIDACtor ® Protection Thyristors Broadband Optimized™ Protection Normalized Holding Current vs. Case Temperature 1.08 1.2 1.06 1.1 Normalized IH Percent of VS Change – % Normalized VS Change vs. Junction Temperature 1.04 1.02 1.00 0.98 0.96 -50 -25 0 25 50 75 100 125 150 Junction Temperature (TJ) – °C 1.0 0.9 0.8 0.7 0.6 -50 -25 0 25 50 75 100 125 150 Case Temperature ºC Soldering Parameters Reflow Condition - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (Min to Max) (ts) Pb-Free assembly 150°C 200°C 60-180 secs. Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reflow - Temperature (TL) (Liquidus) +217°C - Temperature (tL) 60-150 secs. Peak Temp (TP) 250(+0/-5)°C Time within 5°C of actual Peak Temp (tp) 20-40 secs. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed 260°C © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/24/16 SIDACtor ® Protection Thyristors Broadband Optimized™ Protection Physical Specifications Environmental Specifications Temp Cycling Mil-STD-883, Method 1010.8 Condition C, -65°C to +150°C 168 Hrs, 85°C /60%RH+3IR-Reflow, 260°C +5V, -0°C Bias Humidity JESD 22-A101 85°C , 85°CRH. 50V 168 Hrs, 85°C /60%RH+3IR-Reflow, 260°C +5V, -0°C Pressure Cooker JEDEC 22-A102 No Bias, 121°C, 100%RH 96Hrs/192Hrs. 168 Hrs, 85°C /60%RH+3IR-Reflow, 260°C +5V, -0°C High Temp Storage JESD 22-A103 Con B. 150°C, no bias 1000Hrs HTRB JESD 22-108 168 Hrs, 85°C /60%RH+3IR-Reflow, 260°C +5V, -0°C Thermal Shock Mil-STD-883, Method 1011.9 Condition A, 0°C to 100°C 168 Hrs, 85°C /60%RH+3IR-Reflow, 260°C +5V, -0°C C-SAM As per flow, JSTD-020 pre&post preconditioning test. Wet Humidity (Tin only) JESD 201 standard: 55°C/85%RH SOT23: Matte Tin Lead Plating Lead Material Copper Alloy Lead Coplanarity 0.0004 inches (0.102mm) Subsitute Material Silicon Body Material Molded Epoxy Flammability V-0 Notes: 1. All dimensions are in millimeters. 2. Dimensions include solder plating. 3. Dimensions are exclusive of mold flash & metal burr. 4. All specifications comply to JEDEC MO-178 5. Blo is facing up for mold and facing down for trim/form, i.e. reverse trim/form. 6. Package surface matte tine Dimensions - SOT23-6 Dimensions Inches Min M P R O © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/24/16 Max Min Max A 0.041 0.057 1.050 1.450 A1 0.000 0.006 0.000 0.150 A2 0.041 0.051 1.050 1.300 b 0.014 0.020 0.350 0.508 C 0.004 0.008 0.090 0.200 D 0.110 0.118 2.800 3.000 E 0.102 0.118 2.600 3.000 E1 0.057 0.069 1.450 1.750 e Recommended Solder Pad Layout Millimeters 0.037 (BSC) e1 0.071 L (note 4.5) 0.004 N (note 6) 0.950 (BSC) 0.075 1.800 0.023 0.100 6 1.900 0.600 6 0°C 10°C 0°C 10°C M - 0.102 - 2.590 O - 0.027 - 0.690 P - 0.039 - 0.990 R - 0.038 - 0.950 Notes: 1. Dimensioning and tolearances per ANSI 14.5M-1982. 2. Package conforms to EIAJ SC-74 (1992) 3. Dimensions D and E1 are exclusive of mold flash, protrusions, or gate burrs. 4. Foot lenth L measured at reference to seatng plane. 5. “L” is the length of flat foot surface for soldering to substrate. 6. “N” is the number of terminal positions. 7. Controlling dimension: MILLIMETER. Converted inch dimensions are not necessarily exact. SIDACtor ® Protection Thyristors Broadband Optimized™ Protection Part Marking Part Numbering SDP 024 0 T023 G 6 RP 6 5 4 Reel Pack Type SIDACtor DSL Protector P24 Number of pins Nominal Working voltage: Surge Ipp rating Construction variable: Package Type 0=single chip 1 2 Part Marking Code 3 Packing Options Package Type SOT23-6 Description Quantity Tape and Reel 3000 Embossed Carrier Tape & Reel Specification - SOT23-6 14.4mm ACCESS HOLE 13mm 180mm 4.0mm 2.0mm 1.5mm DIA. HOLE 1.75mm CL 8mm 4.0mm 60mm GENERAL INFORMATION 1. 3000 PIECES PER REEL. 2. ORDER IN MULTIPLES OF FULL REELS ONLY. 3. MEETS EIA-481 REVISION "A" SPECIFICATIONS. SOT-23 (8mm POCKET PITCH) 8.4mm USER DIRECTION OF FEED PIN 1 COVER TAPE © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/24/16