GL1506 THRU GL1508 Glass Passivated Single In-Line Bridge Rectifiers Reverse voltage-600V to 800V Forward current-15Amperes FEATURES • • • • • • • • Glass passivated chip junction Thin single in-line package Ideal for printed circuit boards High surge current capability High case dielectric strength of 2500 VRMS Low forward voltage drop Solder dip 260 °C, 10 s Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC MECHANICAL DATA • • • • • Case: GBJ(5S), molded epoxy body,Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22B-106 Polarity: As marked on body Mounting Torque: 10cm-kg(8.8 inches-lbs)maximum Recommended Torque: 5.7cm-kg(5 inches-lbs) PRIMARY CHARACTERISTICS TYPICAL APPLICATIONS IF(AV) 15 A VRRM 600 V,800V IFSM VF at IF=7.5A,TA=125℃ 350A 0.82 IR 5µA TJ max. 150 °C General purpose use in ac-to-dc full wave rectification for switching Power Supply.Home Appliances, Office Equipment, Industrial Automation applications MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL GL1506 GL1508 UNIT Maximum repetitive peak reverse voltage VRRM 600 800 V Maximum RMS voltage VRMS 420 560 V Maximum DC blocking voltage VDC 600 800 V (1) IF(AV) 15 IF(AV) 3.7 Peak forward surge current,8.3 ms single half sine-wave superimposed on rated load(JEDEC Method) IFSM 350 A Dielectric strength (Terminals to case, AC) VISO 2500 Volts TJ, TSTG - 55 to + 150 °C Maximum average forward rectified output current at TC=120℃ TA=25℃ Operating junction and storage temperature range A (2) Notes: (1) Unit case mounted with heatsink (2) Unit case mounted on PCB without heatsink www.goodark.com 1 / 3 rev.1 GL1506 THRU GL1508 Glass Passivated Single In-Line Bridge Rectifiers Reverse voltage-600V to 800V Forward current-15Amperes ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage drop per leg at 7.5A IF=7.5 A Maximum DC reverse current at rated DC blocking voltage Typical time reverse recovery TA=25℃ SYMBOL GL1506 GL1508 0.9 VF UNIT Volts 0.82 TA=125℃ 5 TA=25℃ IR µA 250 TA=125℃ IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A TRR 4.5 us THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL GL1506 GL1508 (1) 1 (2) 25 RθJC Maximum thermal resistance RθJA UNIT ℃/W Notes: (1) Thermal resistance from junction to case, Unit case mounted with heatsink (2) Thermal resistance from junction to ambient, Unit case mounted on PCB without heatsink ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) BASE QUANTITY GL1506 7.141 20 Tube DELIVERY MODE GL1506 7.141 40 Paper tray RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) Figure 1. Derating Curve Output Rectified Current www.goodark.com 2 / 3 Figure 2. Maximum Non‐Repetitive Peak Forward Surge Current Per Leg rev.1 GL1506 THRU GL1508 Glass Passivated Single In-Line Bridge Rectifiers Reverse voltage-600V to 800V Forward current-15Amperes Pulse width=300us 1% Duty Cycle,TJ=25℃ Figure 3. Typical Forward Characteristics Per Leg Figure 4. Typical Reverse Characteristics Per Leg Figure 5. Typical Junction Capacitance Per Leg PACKAGE OUTLINE DIMENSIONS in inches (millimeters) www.goodark.com 3 / 3 rev.1