PSMAF150 SERIES Up to 150 Watts Medical AC/DC Power Supplies Single Outputs Rev D Open Frame (Suffix “O”) U-Chassis (Suffix “U”) Enclosed Case (Suffix “C”) Size: 4.00 x 2.00 x 1.16 inches Size: 4.60 x 2.44 x 1.54 inches Size: 4.60 x 2.44 x 1.54 inches Enclosed w/ External Fan (Suffix “F”) Din Rail (Suffix “D”) Din Rail with External Fan (Suffix “DF”) Size: 4.60 x 2.44 x 1.94 inches Size: 4.60in x 2.44in x 1.54in Size: 4.60in x 2.44in x 1.54in FEATURES • • • • • • • Protection Type Class I or Class II Active Power Factor Correction 2 x 4 Inch Footprint High Efficiency up to 92% Adjustable Output Voltage Built-in EMI Filter 5000M Operating Altitude • • • • • • Low Leakage Current under 100µF Low Standby Power Consumption under 0.3W -25°C to +80°C Operating Temperature Range Up to 150W with 10CFM Forced Air 4000VAC Input to Output 2 MOPP Insulation Over Voltage, Over Load, and Short Circuit Protection • Designed to Meet Energy Efficiency Level VI • • • • 85~264 VAC (120~370 VDC) Input Voltage Range Compliant to RoHS EU Directive 2011/65/EU CE Marked ANSI/AAMI ES60601-1, EN60601-1, and IEC60601-1 3rd Edition Medical Approvals • Open Frame, U-Chassis, Enclosed Case, Enclosed Case with External Fan, DIN Rail and DIN Rail with External Fan Mechanical Options DESCRIPTION The PSMAF150 series of AC/DC medical power supplies provides up to 150 Watts of output power with 10CFM forced air and up to 110 Watts with convection cooling in a compact 2 x 4 inch footprint. These supplies feature a universal 85-264VAC (120~370 VDC) input, enabling them to be used anywhere in the world. The off load power draw is less than 0.3 Watts, which complies with many energy-saving initiatives. 12V, 15V, 24V, 28V, 36V, and 48VDC single output voltages are available for this series, all of which have a ±10% adjustment range. These supplies also feature a low leakage current of less than 100μA at 264VAC and are designed to withstand 4000VAC, input to output. The PSMAF150 series has an operating temperature range of -25°C to +80°C, power factor correction, and a high efficiency up to 92%. These supplies are also protected against short circuit, over voltage, and over current conditions. The PSMAF150 series has ANSI/AAMI ES60601-1, EN60601-1, and IEC60601-1 3rd edition medical approvals, are CE Marked, are designed to meet Efficiency Level VI and meet the conducted and radiated EMI requirements of EN55011, EN55022 and FCC Part 18. Open frame, U-chassis, enclosed case, enclosed case with external fan, DIN rail and DIN rail with external fan mechanical options are available. Class I and Class II protection types are also available. 01/05/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 12 PSMAF150 SERIES Up to 150 Watts Medical AC/DC Power Supplies Single Outputs Rev D MODEL SELECTION TABLE Model Number (1) PSMAF150-12S-O PSMAF150-15S-O PSMAF150-24S-O PSMAF150-28S-O PSMAF150-36S-O PSMAF150-48S-O PSMAF150-12S-U PSMAF150-15S-U PSMAF150-24S-U PSMAF150-28S-U PSMAF150-36S-U PSMAF150-48S-U PSMAF150-12S-C PSMAF150-15S-C PSMAF150-24S-C PSMAF150-28S-C PSMAF150-36S-C PSMAF150-48S-C PSMAF150-12S-F PSMAF150-15S-F PSMAF150-24S-F PSMAF150-28S-F PSMAF150-36S-F PSMAF150-48S-F PSMAF150-12S-D PSMAF150-15S-D PSMAF150-24S-D PSMAF150-28S-D PSMAF150-36S-D PSMAF150-48S-D PSMAF150-12S-DF PSMAF150-15S-DF PSMAF150-24S-DF PSMAF150-28S-DF PSMAF150-36S-DF PSMAF150-48S-DF NOTES Input Voltage 85 - 264 VAC (120 - 370 VDC) 85 - 264 VAC (120 - 370 VDC) 85 - 264 VAC (120 - 370 VDC) 85 - 264 VAC (120 - 370 VDC) 85 - 264 VAC (120 - 370 VDC) 85 - 264 VAC (120 - 370 VDC) Output Current Output Voltage 10CFM Forced Air Convection 12 VDC 12.5A 8.34 A 15 VDC 10A 7.34 A Ripple & Noise 120mVp-p 150mVp-p 24 VDC 28 VDC 36 VDC 48 VDC 12 VDC 15 VDC 24 VDC 28 VDC 36 VDC 48 VDC 12 VDC 15 VDC 24 VDC 28 VDC 36 VDC 48 VDC 12 VDC 15 VDC 24 VDC 28 VDC 36 VDC 48 VDC 12 VDC 15 VDC 24 VDC 28 VDC 36 VDC 48 VDC 12 VDC 15 VDC 24 VDC 28 VDC 36 VDC 48 VDC 220mVp-p 220mVp-p 250mVp-p 250mVp-p 120mVp-p 150mVp-p 220mVp-p 220mVp-p 250mVp-p 250mVp-p 120mVp-p 150mVp-p 220mVp-p 220mVp-p 250mVp-p 250mVp-p 120mVp-p 150mVp-p 220mVp-p 220mVp-p 250mVp-p 250mVp-p 120mVp-p 150mVp-p 220mVp-p 220mVp-p 250mVp-p 250mVp-p 120mVp-p 150mVp-p 220mVp-p 220mVp-p 250mVp-p 250mVp-p 6.25A 5.36A 4.17A 3.13A 12.5A 10A 6.25A 5.36A 4.17A 3.13A 12.5A 10A 6.25A 5.36A 4.17A 3.13A 12.5A 10A 6.25A 5.36A 4.17A 3.13A 12.5A 10A 6.25A 5.36A 4.17A 3.13A 12.5A 10A 6.25A 5.36A 4.17A 3.13A 4.59 A 3.93 A 3.06 A 2.09 A 8.34 A 7.34 A 4.59 A 3.93 A 3.06 A 2.09 A 10.84 A 9A 5.63 A 4.83 A 3.75 A 2.71 A 10.84 A 9A 5.63 A 4.83 A 3.75 A 2.71 A 10.84 A 9A 5.63 A 4.83 A 3.75 A 2.71 A 10.84 A 9A 5.63 A 4.83 A 3.75 A 2.71 A Output Power 10CFM Forced Air Convection 150W 100W 150W 110W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 110W 110W 110W 100W 100W 110W 110W 110W 110W 100W 100W 110W 110W 110W 110W 100W 100W 110W 110W 110W 110W 100W 100W 110W 110W 110W 110W 100W 100W 110W 110W 110W 110W 100W Efficiency 91% 92% 92% 92% 92% 92% 91% 92% 92% 92% 92% 92% 91% 92% 92% 92% 92% 92% 91% 92% 92% 92% 92% 92% 91% 92% 92% 92% 92% 92% 91% 92% 92% 92% 92% 92% 1. The “X” in the model number represents the package type. It can be “O” for open frame, “U” for U-chassis, “C” for enclosed case, “F” for enclosed case with external fan, “D” for DIN rail or “DF” for DIN rail with external fan. DIN rail is only available for enclosed case type models. 2. Class I and Class II protection types are also available for this series. Class I comes standard and for Class II add the suffix “B” to the model number. 01/05/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 12 PSMAF150 SERIES Up to 150 Watts Medical AC/DC Power Supplies Single Outputs Rev D SPECIFICATIONS: PSMAF150 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit 264 370 63 1.7 0.8 VAC VDC Hz INPUT SPECIFICATIONS Operating Input Voltage Range Input Frequency Input Current No load Input Power Power Factor Input Inrush Current Input Protection AC input DC input AC input 115VAC and full load 230VAC and full load 230VAC 230VAC 85 120 47 Option -F (With Fan) Others 0.6 0.3 A W 0.95 230VAC Internal fuse in line and neutral 60 T3.15A / 250VAC A OUTPUT SPECIFICATIONS Output Voltage Initial Set Voltage Accuracy Line Regulation Load Regulation 230VAC and full load Low line to high line at full load No load to full load 10% load to 90% load See Table +1.0 +0.2 +0.5 +0.4 +10 150 110 100 See Table -1.0 -0.2 -0.5 -0.4 -10 Voltage Adjustability 10CFM forced air cooling (-F) Convection cooling for 15V, 24V, 28V, and 36V output models Convection cooling for 12V and 48V output models Output Power Output Current Minimum Load Ripple & Noise (20MHz BW) With 1µF/25V 1206 X7R MLCC capacitor With 1µF/25V 1206 X7R MLCC capacitor With 1µF/50V 1206 X7R MLCC capacitor With 1µF/50V 1206 X7R MLCC capacitor With 1µF/50V 1206 X7R MLCC capacitor With 0.1µF/100V 1206 X7R MLCC capacitor Transient Response Load step from 50~75% change at 2.5A/µs Start-Up Time Rise Time Hold-up Time Temperature Coefficient Fan Power Supply 0 120 150 220 220 250 250 12V output model 15V output model 24V output model 28V output model 36V output model 48V output model Peak Deviation Recovery Time % W mVp-p 3 500 1000 16 -0.02 % % 20 115VAC and full load % % +0.02 12V at 500mA % Vout µs ms ms ms %/°C PROTECTION Over Voltage Protection Over Load Protection Short Circuit Protection % of Vout (nom); latch mode % of Iout rated; hiccup mode 115 115 130 % 150 % Continuous, automatic recovery GENERAL SPECIFICATIONS Switching Frequency 60 Isolation Voltage 1 minute (2MOPP insulation) Isolation Resistance Leakage Current 500VDC 264VAC 01/05/2016 Input to Output Input to FG Output to FG kHz 4000 1500 1500 0.1 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] VAC 100 GΩ µA Page 3 of 12 PSMAF150 SERIES Up to 150 Watts Medical AC/DC Power Supplies Single Outputs Rev D SPECIFICATIONS: PSMAF150 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit ENVIRONMENTAL SPECIFICATIONS Operating Ambient Temperature Storage Temperature Range Operating Altitude Shock Thermal Shock Vibration Relative Humidity MTBF 10CFM forced air cooled: 150W (with derating) Convection cooled: 100~110W (with derating) 10CFM forced air cooled: 150W (with derating) Convection cooled: 100~110W (with derating) -25 -25 -40 -40 Non-condensing MIL-HDBK-217F, Ta=25°C, full load 5 786,100 +80 +85 +75 +85 5000 meters IEC68-2-27 MIL-STD-810F IEC68-2-6 95 °C °C % RH hours PHYSICAL SPECIFICATIONS Open Frame Models (Suffix “-O”) U-Chassis Models (Suffix “-U”) Enclosed Case Models (Suffix “-C”, “-D”) Enclosed Case with External Fan Models (Suffix “-F”, “-DF”) Weight Dimensions (L x W x H) Input Connector (CON1) Output Connector (CON2) Fan Connector (CON3) 6.60oz (187g) 8.29oz (235g) 9.03oz (256g) 9.03oz (256g) 4.00 x 2.00 x 1.16 inches Open Frame Models (Suffix “-O”) (101.6 x 50.8 x 29.5 mm) 4.60 x 2.44 x 1.54 inches U-Chassis Models (Suffix “-U”) (116.8 x 62.0 x 39.2 mm) 4.60 x 2.44 x 1.54 inches Enclosed Case Models (Suffix “-C”, “-D”) (116.8 x 62.0 x 39.2 mm) 4.60 x 2.44 x 1.94 inches Enclosed Case with External Fan Models (Suffix “-F”, “-DF”) (116.8 x 62.0 x 49.2 mm) Mates with JST housing VHR-3N and JST Series SVH-21T-P1.1 crimp terminals Mates with JST housing VHR-6N and JST Series SVH-21T-P1.1 crimp terminals Mates with Molex housing 22-01-1022 and 2759 crimp terminals SAFETY & EMC Safety Approvals EMI Conducted Radiated Harmonic Currents Voltage Flicker ESD Radiated Immunity Fast Transient Surge Conducted Immunity Power Frequency Magnetic Field Dip and Interruptions 01/05/2016 ANSI/AAMI ES60601-1, IEC60601-1, EN60601-1 Conducted Class B Radiated Class A Class A and D EN55011, EN 55022 and FCC Part 18 EN61000-3-2 EN61000-3-3 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 EN61000-4-11 Full load Air±8kV and Contact ±6kV 10 V/m ±2kV DM ±1kV and CM ±2kV 20 Vrms 10 A/m 30% 60% 230VAC 50Hz >95% >95% 30% 60% 100VAC 50Hz >95% >95% 500mS 100mS 10mS 5000mS 500mS 100mS 10mS 5000mS Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria B Perf. Criteria A Perf. Criteria B Perf. Criteria A Perf. Criteria B Page 4 of 12 PSMAF150 SERIES Up to 150 Watts Medical AC/DC Power Supplies Single Outputs Rev D DERATING CURVES Derating Curve vs Ambient Temperature Vin=115VAC Derating Curve vs. Ambient Temperature Vin=230VAC Derating Curve vs. Input Voltage 01/05/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 5 of 12 Rev D PSMAF150 SERIES Up to 150 Watts Medical AC/DC Power Supplies Single Outputs EFFICIENCY CURVES Efficiency vs. Output Load MAF150-24S-x Efficiency vs. Input Voltage MAF150-24S-x MECHANICAL DRAWING OPEN FRAME (SUFFIX “-O”) 01/05/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 6 of 12 Rev D PSMAF150 SERIES Up to 150 Watts Medical AC/DC Power Supplies Single Outputs MECHANICAL DRAWING U-CHASSIS (SUFFIX “-U”) 01/05/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 7 of 12 Rev D PSMAF150 SERIES Up to 150 Watts Medical AC/DC Power Supplies Single Outputs MECHANICAL DRAWING ENCLOSED CASE (SUFFIX “-C”) 01/05/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 8 of 12 Rev D PSMAF150 SERIES Up to 150 Watts Medical AC/DC Power Supplies Single Outputs MECHANICAL DRAWING ENCLOSED CASE WITH EXTERNAL FAN (SUFFIX “-F”) 01/05/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 9 of 12 Rev D PSMAF150 SERIES Up to 150 Watts Medical AC/DC Power Supplies Single Outputs MECHANICAL DRAWING DIN RAIL (SUFFIX “-D”) 01/05/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 10 of 12 Rev D PSMAF150 SERIES Up to 150 Watts Medical AC/DC Power Supplies Single Outputs MECHANICAL DRAWING DIN RAIL WITH EXTERNAL FAN(SUFFIX “-DF”) 01/05/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 11 of 12 PSMAF150 SERIES Up to 150 Watts Medical AC/DC Power Supplies Single Outputs Rev D MODEL NUMBER SETUP PSMAF Series Name 150 - 12 S Output Power Ouptut Voltage Output Quantity 150: 150 Watts 12: 12 VDC S: Single Output - O B Package Type Protection Type O: Open Frame 15: 15 VDC U: U-Chassis 24: 24 VDC C: Enclosed Case 28: 28 VDC F: Enclosed with External Fan 36: 36 VDC D: DIN Rail (1) 48: 48 VDC None: Class I B: Class II DF: Din Rail with External Fan (1) DIN Rail is only available for enclosed case models COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, welldocumented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 01/05/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Rd. Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 12 of 12