Package Information Vishay Siliconix DFN-10 LEAD (3 X 3) D e Terminal Tip 3 D/2 3 NXb 0.10 M C A B 5 0.15 C E2 NXL Exposed Pad Index Area D/2 E/2 D2 0.15 5 BOTTOM VIEW // 0.10 E/2 ÉÉÉÉ ÉÉÉÉ ÉÉÉÉ ÉÉÉÉ 2x Index Area D/2 E/2 C E 2x TOP VIEW C A 4 NX 0.08 SEATING PLANE C A1 A3 SIDE VIEW MILLIMETERS NOTES: 1. All dimensions are in millimeters and inches. 2. N is the total number of terminals. 3. 4. 5. Dimension b applies to metallized terminal and is measured between 0.15 and 0.30 mm from terminal tip. Coplanarity applies to the exposed heat sink slug as well as the terminal. The pin #1 identifier may be either a mold or marked feature, it must be located within the zone iindicated. INCHES Dim Min Nom Max Min Nom Max A 0.80 0.90 1.00 0.031 0.035 0.039 A1 0.00 0.02 0.05 0.000 0.001 0.002 A3 b D D2 E E2 e L 0.20 BSC 0.18 0.23 0.008 BSC 0.30 0.007 2.48 0.087 3.00 BSC 2.20 2.38 1.64 0.40 0.094 0.098 0.118 BSC 1.74 0.059 0.50 BSC 0.30 0.012 0.118 BSC 3.00 BSC 1.49 0.009 0.065 0.069 0.020 BSC 0.50 0.012 0.016 0.020 *Use millimeters as the primary measurement. ECN: S-42134—Rev. A, 29-Nov-04 DWG: 5943 Document Number: 73181 29-Nov-04 www.vishay.com 1