Package Information www.vishay.com Vishay Siliconix QFN-16 Lead (3 x 3) D2 D2/2 Terminal Tip D (3) - B- D/2 L E/2 E2/2 e E E2 C 3xe 0.25 - A- Exposed Pad (4) 4xb 0.10 M C A B (3) 0.25 C 3xe TOP VIEW BOTTOM VIEW // 0.10 C 0.08 C A (4) NX A1 SEATING PLANE - C- A3 SIDE VIEW Notes (1) All dimensions are in millimeters. (2) N is the total number of terminals. (3) Dimension b applies to metallized terminal and is measured between 0.25 and 0.30 mm from terminal tip. (4) Coplanarity applies to the exposed heat sink slug as well as the terminal. (5) The pin #1 identifier may be either a mold or marked feature, it must be located within the zone indicated. VARIATION 1 DIM. MILLIMETERS VARIATION 2 INCHES MILLIMETERS INCHES MIN. NOM MAX. MIN. NOM MAX. MIN. NOM MAX. MIN. NOM MAX. A 0.80 0.90 1.00 0.031 0.035 0.039 0.80 0.90 1.00 0.031 0.035 0.039 0.012 b 0.18 0.23 0.30 0.007 0.009 0.012 0.18 0.25 0.30 0.007 0.010 D 2.90 3.00 3.10 0.114 0.118 0.122 2.90 3.00 3.10 0.114 0.118 0.122 D2 1.00 1.15 1.25 0.039 0.045 0.049 1.50 1.70 1.80 0.059 0.067 0.071 E 2.90 3.00 3.10 0.114 0.118 0.122 2.90 3.00 3.10 0.114 0.118 0.122 E2 1.00 1.15 1.25 0.039 0.045 0.049 1.50 1.70 1.80 0.059 0.067 0.071 0.50 0.012 0.020 0.30 0.50 0.012 e L 0.50 BSC 0.30 0.40 0.020 BSC 0.50 BSC 0.016 0.40 0.020 BSC 0.016 0.020 ECN: T16-0233-Rev. D, 09-May-16 DWG: 5899 Revision: 09-May-16 1 Document Number: 72208 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000