V i s h ay I n t e r t e c h n o l o g y, I n c . DIODES Diodes – Reverse Voltages to 1000 V in MBLS Package MBL104S, MBL106S, MBL108S, MBL110S Series Bridge Rectifiers Low-Profile Miniature Glass Passivated Single-Phase SurfaceMount Bridge Rectifiers for Smartphone Charger Applications Key BENEFITS • • • • • • • • Maximum peak reverse voltage ratings to 1000 V Glass passivated chip technology Low typical height of 1.4 mm Surface-mount MBLS package is compatible with the SOPA-4 Ideal for automated placement Maximum operation junction temperature of 150 °C Compliant to RoHS Directive 2011/65/EU Halogen free according to JEDEC JS709A standards APPLICATIONS • General purpose use in AC/DC bridge full-wave rectification for power supplies, lighting ballasts, home appliances, office equipment, and smartphone chargers Resources • Datasheet: MBL104S-M3/I, MBL106S-M3/I, MBL108S-M3/I, MBL110S-M3/I • For technical questions contact [email protected] • Material categorization: For definitions of compliance please see http://www.vishay.com/doc?99912 One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0367-1305 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i sh ay I n tertech n o l o g y, I n c . MBL104S, MBL106S, MBL108S, MBL110S VishayMBL108S, General Semiconductor MBL104S, MBL106S, MBL110S MBL104S, MBL106S, MBL108S, MBL110S MBL104S, MBL106S, MBL108S, MBL110S www.vishay.com www.vishay.com DIODES Vishay General Semiconductor www.vishay.com www.vishay.com Vishay General Semiconductor Vishay General Semiconductor Miniature Glass Passivated Single-Phase MBL104S, MBL106S, MBL108S, MBL110S MiniatureSurface Glass Passivated Single-Phase Mount Bridge Rectifier Miniature Glass Passivated Single-Phase Miniature Glass Passivated Single-Phase Series Bridge Rectifiers Surface Mount Bridge Rectifier Surface Mount Bridge Rectifier Surface Mount Bridge Rectifier FEATURES ~ ~ ~ +- + + ~ ~ ~ FEATURES • Low profilefile - typical height of 1.4 mm • UL recognition number E54214 • UL recognition file number E54214 • UL recognition file number E54214 Ideal•for automated placement • Low• profile -Low typical height of 1.4 mmof 1.4 mm profile - typical height • Low profile - typical height of 1.4 mm + • for High current capability • Ideal automated placement •surge Ideal for automated placement • Ideal for automated placement • Meets MSL level per J-STD-020, • current High surge current1,capability • High• surge capability High surge current capability LF maximum peak of 260 °C - ~ - • Meets 1,J-STD-020, per J-STD-020, • Meets MSL levelMSL 1, level per per •• Meets MSL level 1, J-STD-020, Material categorization: For of compliance LFpeak maximum peak 260definitions °C LF maximum of 260 °C of°C LF maximum peak of 260 please see www.vishay.com/doc?99912 • Material categorization: For definitions of compliance • Material categorization: For For definitions of of compliance • Material categorization: definitions compliance please see www.vishay.com/doc?99912 please see www.vishay.com/doc?99912 TYPICAL please seeAPPLICATIONS www.vishay.com/doc?99912 APPLICATIONS GeneralTYPICAL purpose use in AC/DC bridge full wave rectification ~ ~ + + ~ ~ ~ Case Style (MBLS) TYPICAL APPLICATIONS TYPICAL APPLICATIONS for power supply, lighting batteryfull charger, home General purpose use ballaster, in AC/DC bridge wave rectification + ~ - - ~ • UL recognition file number E54214 FEATURES FEATURES - + ~ ~ Case Style (MBLS) Case(MBLS) Style (MBLS) Case Style PRIMARY CHARACTERISTICS PRIMARY CHARACTERISTICS IF(AV) 1.0 A PRIMARY IF(AV) A V PRIMARY CHARACTERISTICS V CHARACTERISTICS 400 V, 600 V, 800 V, 1.0 1000 General use in AC/DC bridge fulltelecommunication wave rectification appliances, office equipment, and General purpose use in AC/DC bridge full wave rectification forpurpose power supply, lighting ballaster, battery charger, home for power supply, lighting ballaster, battery charger, home applications. appliances, office equipment, and telecommunication for power supply, lighting ballaster, battery charger, home appliances, equipment, telecommunication applications. appliances, officeoffice equipment, andand telecommunication MECHANICAL DATA applications. applications. MECHANICAL DATA Case: MBLS MECHANICAL Case: MBLSDATA MECHANICAL 400 V Epoxy meets DATA 1.0V,A600 V, 800 V, 1000 UL 94 V-0 flammability rating 1.0 A 30 A Case: MBLS Epoxy meets UL 94 V-0 flammability rating 30 A 400 V, 600 V, 800 V, 1000 V Case: MBLS Base P/N-M3 - halogen-free, RoHS-compliant, and 5 μA R VRRM 400 V, 600 V, 800 V, 1000 V Epoxy Base meetsgrade UL 94 V-0- flammability rating P/N-M3 halogen-free, RoHS-compliant, and 5 μA IR 30 AV IIFSM commercial Epoxy meets UL 94 V-0 flammability rating V at = 0.4 A 0.95 F F 30 A IFSM commercial grade VF at IF = 0.4 A 0.95 V Base P/N-M3 halogen-free, RoHS-compliant, 5 μA I R tin platedRoHS-compliant, leads, solderableandand per TJ max. Base Terminals: P/N-M3 -Matte halogen-free, 5 μA 150 °C 150 °C IR Terminals: Matte tin plated leads, solderable per commercial grade VF at IF = 0.4 ATJ max. 0.95 V J-STD-002 and JESD22-B102 commercial J-STD-002 grade and JESD22-B102 VF at IF = 0.4 A 0.95 V Terminals: Matte tin201plated leads, solderable per M3 suffix, meets JESD class 1A whisker test 150 °C TJ max. M3 suffix, meets JESD 201 class 1A whisker testper Terminals: Matte tin plated leads, solderable 150 °C TJ max. J-STD-002 JESD22-B102 Polarity: Asand marked on body Polarity: AsJESD marked body1A whisker test J-STD-002 and JESD22-B102 M3 suffix, meets 201on class RRM IF(AV) IIF(AV) FSM VRRM I VRRM IFSM M3 suffix, meets JESD 201 class 1A whisker test Polarity: As marked on body MAXIMUM RATINGS (TA = 25(T°C unless otherwise Polarity: noted) As marked on body MAXIMUM RATINGS A = 25 °C unless otherwise noted) SYMBOL MBL104S MBL106S MBL108S MBL110S UNITUNIT SYMBOL MBL104S MBL106S MBL108S MBL110S MBL104S, MBL106S, MBL108S, MBL110S PARAMETER PARAMETER MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) 800 800 1000 1000 Maximum repetitive reverse voltage VRRM VRRM 400 400 600 600 Maximumpeak repetitive peak reverse voltage MAXIMUM RATINGS (T °C unless otherwiseSYMBOL noted) A = 25 www.vishay.com PARAMETER MBL104S MBL106S MBL108S MBL110S V V UNIT 280 420 560 700 V V Maximum RMS voltage V 280 420 560 700 Maximum RMS voltage V RMS RMS PARAMETER SYMBOLV MBL104S400 MBL106S UNITV 600 MBL108S 800 MBL110S 1000 Maximum repetitive peak reverse voltage RRM Maximum DC blocking voltage V 400 600 800 1000 V Maximum DC blocking voltage V 400 600 800 1000 DC 600 420 800 560 1000700 V V V MaximumMaximum repetitive RMS peakvoltage reverse voltage VRRM V DC 400 280 RMS ELECTRICAL CHARACTERISTICS (TA current = 25 °C unless otherwise420 noted) Maximum average forward outputcurrent rectified Maximum average forward output rectified (1) F(AV) (1) 560 1.0 7001000 V A MaximumMaximum RMS voltage VRMS IF(AV) 1.0 DC VDC I280 400 600 800 V A (fig.blocking 1, fig. 2) voltage (fig. 1, fig. 2) PARAMETER TEST CONDITIONS SYMBOL MBL104S MBL106S MBL108S MBL110S UNIT MaximumMaximum DC blocking voltage V 400 600 800 1000 V average forward output rectified current Peak forward surge current single sine-wave DC I (1) Peak forward surge current single sine-wave 1.0 A A 30 IFSM F(AV) Maximum 30 A (fig. 1, fig. instantaneous 2)superimposed on ratedIFload = 0.4 A TA = 25 °C IFSMVF (1) 0.95 V superimposed on rated Maximumforward averagevoltage forward output rectified current drop perload diode (1) 1.0 A 2 A2 s IF(AV) Rating fusing < 8.3 sine-wave ms) I2t 3.0 2t Peak surge (fig. 1, fig.Rating 2) forward for fusing (tfor <current 8.3 ms)(tsingle I 3.0 A 305 As TA = 25 °C IFSM (2) Maximum DC reverse current superimposed on rated load and Rated μA -+55 to + 150 Operating junction storageVRtemperature rangeT , T IR TJ, TSTG - 55 to500 150 °C °C Operating and storage temperature range per diode Peak forward surge junction current single sine-wave J STG °C TA = 125 30 3.0 A A2 s IFSM Ratingonforrated fusing (t < 8.3 ms) I2t superimposed Note load www.vishay.com Notes Note (1) TSTG pad areas, 1 oz. PCB 3.0 - 55 to + 150 storage temperature range TJ, copper Device and mounted on 0.47" x 0.47" (12 mm x 12 (1) Operating Rating for fusing (tmounted <junction 8.3 I2t mm) A2s °C Pulse 300ms) μsonpulse 1% Devicetest: 0.47"width, x 0.47" (12duty mmcycle x 12 mm) copper pad areas, 1 oz. PCB (2) Pulse test: Pulse width 40 ms Note - 55 to + 150 °C Operating junction and storage temperature range T ,T Vishay General Semiconductor MBL104S, MBL106S, MBL108S, MBL110S Vishay General Semiconductor (1) J STG Device mounted on 0.47" x 0.47" (12 mm x 12 mm) copper pad areas, otherwise 1 oz. PCB noted) ELECTRICAL CHARACTERISTICS (TA = 25 °C unless Note (1) Device mounted PARAMETER CONDITIONS SYMBOL MBL104S MBL106S on 0.47" x 0.47" (12 mm xTEST 12 mm) pad areas, 1 oz. PCB THERMAL CHARACTERISTICS (Tcopper A = 25 °c unless otherwise noted) Maximum instantaneous PARAMETER forward voltage drop per diode IF = 0.4 A TA = 25 °C SYMBOL VF (1) MBL104S MBL108S MBL110S UNIT MBL106S0.95MBL108S MBL110S UNIT V RJA (2) IRJL R 72 5 25 500 TA = 25 °C °C/W Typical thermal resistance Maximum DC reverse current μA Rated VR per diode TA = 125 °C Note Revision: 12-Apr-13 Document Number: 89959 Notes (1) Device mounted on 0.47" x 0.47" (12 mm x 12 mm) copper pad areas, 1 oz.1PCB (1) Revision: 12-Apr-13 Document Number: 89959 [email protected], [email protected] Forpulse technical questions within your region: [email protected], Pulse test: 300 μs width, 1 % duty cycle 1 (2) Pulse test: Pulse width 40 ms THISquestions DOCUMENT IS SUBJECT [email protected], CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT [email protected], [email protected] For technical within your region: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 12-Apr-13 Document Number: 89959 1 THE PRODUCTS THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TOregion: SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ORDERING INFORMATION (Example) [email protected], [email protected] For technical questions within your [email protected], THERMAL CHARACTERISTICS (TPREFERRED 25 °c unless otherwise noted) THIS DOCUMENT IS SUBJECT TO(g) CHANGE NOTICE. THE PRODUCTS AND THISNumber: DOCUMENT A =WITHOUT PREFERRED P/N UNIT WEIGHT PACKAGE CODE BASEDESCRIBED QUANTITY HEREINDocument DELIVERY MODE89959 Revision: 12-Apr-13 1 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PARAMETER SYMBOL MBL104S MBL106S MBL108S MBL110S UNIT [email protected], [email protected] For technical questions within your region: [email protected], MBL106S-M3/I 0.136 I 4000 13" diameter plastic tape and reel (1) Revision: 12-Apr-13 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE AND THIS DOCUMENT RJAPRODUCTS DESCRIBED HEREIN 72 (1) °C/W Typical thermalARE resistance SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RJL 25 Note RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless (1) Device mounted on 0.47" x 0.47" (12 mm x 12 mm) copper pad areas, 1 oz. PCB otherwise noted) 2/2 1.1 rd Current (A) PRODUCT SHEET rd Current (A) Diodes – Reverse Voltages to 1000 V in MBLS Package - - VMN-PT0367-1305 1.2 RthJL = 25 °C/W ORDERING INFORMATION (Example) This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO 1 0.9 SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 1 0.8 MBL106S-M3/I 0.136 I 0.8 4000 13" diameter plastic tape and reel