MBR7Hxx, MBRF7Hxx, MBRB7Hxx Datasheet

MBR7Hxx, MBRF7Hxx, MBRB7Hxx
www.vishay.com
Vishay General Semiconductor
Schottky Barrier Rectifier
High Barrier Technology for Improved HighTemperature Performance
FEATURES
ITO-220AC
TO-220AC
Power pack
Guardring for overvoltage protection
Low power loss, high efficiency
Low forward voltage drop
Low leakage current
High forward surge capability
High frequency operation
Meets MSL level 1, per J-STD-020, LF maximum peak of
245 °C (for TO-263AB package)
• Solder bath temperature 275 °C maximum, 10 s, per
JESD 22-B106 (for TO-220AC and ITO-220AC package)
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
2
2
1
1
MBR7Hxx
•
•
•
•
•
•
•
•
MBRF7Hxx
PIN 1
PIN 1
CASE
PIN 2
PIN 2
TO-263AB
K
2
TYPICAL APPLICATIONS
1
MBRB7Hxx
PIN 2
For use in low voltage, high frequency rectifier of switching
mode power supplies, freewheeling diodes, DC/DC
converters, and polarity protection application.
K
PIN 1
HEATSINK
PRIMARY CHARACTERISTICS
MECHANICAL DATA
IF(AV)
7.5 A
VRRM
35 V, 45 V, 50 V, 60 V
IFSM
150 A
VF
0.55 V, 0.61 V
IR
50 μA
TJ max.
175 °C
Package
TO-220AC, ITO-220AC,
TO-263AB
Diode variations
Single
Case: TO-220AC, ITO-220AC, TO-263AB
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
MBR7H35
MBR7H45
MBR7H50
MBR7H60
Maximum repetitive peak reverse voltage
VRRM
35
45
50
60
Working peak reverse voltage
VRWM
35
45
50
60
Maximum DC blocking voltage
VDC
35
45
50
60
Maximum average forward rectified current (fig.1)
IF(AV)
7.5
A
Non-repetitive avalanche energy at 25 °C, IAS = 4 A, L =10 mH
EAS
80
mJ
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load
IFSM
150
Peak repetitive reverse surge current at tp = 2.0 μs, 1 kHz
IRRM
1.0
0.5
Peak non-repetitive reverse energy (8/20 μs waveform)
ERSM
20
10
Electrostatic discharge capacitor voltage human body model:
C = 100 pF, R = 1.5 kW
Operating junction and storage temperature range
Voltage rate of change (rated VR)
Isolation voltage (ITO-220AC only) from terminal to heatsink 
t = 1 min
Revision: 13-Aug-13
UNIT
V
A
mJ
VC
25
TJ, TSTG
- 65 to + 175
°C
dV/dt
10 000
V/μs
VAC
1500
V
kV
Document Number: 88796
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBR7Hxx, MBRF7Hxx, MBRB7Hxx
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Maximum instantaneous forward voltage
Maximum reverse current
VF (1)
IR (2)
MBR7H35
MBR7H45
TEST CONDITIONS
TYP.
MAX.
MBR7H50
MBR7H60
UNIT
TYP.
MAX.
IF = 7.5 A
TC = 25 °C
-
0.63
-
0.73
IF = 7.5 A
TC = 125 °C
0.50
0.55
0.58
0.61
IF = 15 A
TC = 25 °C
-
0.75
-
0.87
IF = 15 A
TC = 125 °C
0.61
0.66
0.68
0.72
TC = 25 °C
-
50
-
50
μA
TC = 125 °C
3.0
10
2.0
10
mA
Rated VR
V
Note
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width  40 ms
THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance, junction to case
SYMBOL
MBR
MBRF
MBRB
UNIT
RJC
3.0
5.0
3.0
°C/W
ORDERING INFORMATION (Example)
PACKAGE
PREFERRED P/N
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
TO-220AC
MBR7H45-E3/45
1.80
45
50/tube
Tube
ITO-220AC
MBRF7H45-E3/45
1.94
45
50/tube
Tube
TO-263AB
MBRB7H45-E3/45
1.33
45
50/tube
Tube
TO-263AB
MBRB7H45-E3/81
1.33
81
800/reel
Tape and reel
TO-220AC
MBR7H45HE3/45 (1)
1.80
45
50/tube
Tube
ITO-220AC
MBRF7H45HE3/45 1)
1.94
45
50/tube
Tube
TO-263AB
MBRB7H45HE3/45 (1)
1.33
45
50/tube
Tube
TO-263AB
MBRB7H45HE3/81 (1)
1.33
81
800/reel
Tape and reel
Note
(1) AEC-Q101 qualified
Revision: 13-Aug-13
Document Number: 88796
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBR7Hxx, MBRF7Hxx, MBRB7Hxx
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
10
Instantaneous Reverse Leakage
Current (mA)
Average Forward Current (A)
10
MBR, MBRB
8
6
MBRF
4
2
TJ = 150 °C
1
TJ = 125 °C
0.1
0.01
MBR7H35, MBR7H45
MBR7H50, MBR7H60
0.001
TJ = 25 °C
0.0001
0
0
25
50
75
100
125
150
0
175
40
60
80
100
Fig. 4 - Typical Reverse Characteristics Per Leg
Fig. 1 - Forward Current Derating Curve
175
1000
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
TJ = TJ max.
8.3 ms Single Half Sine-Wave
150
Junction Capacitance (pF)
Peak Forward Surge Current (A)
20
Percent of Rated Peak Reverse Voltage (%)
Case Temperature (°C)
125
100
75
50
100
10
MBR7H35, MBR7H45
MBR7H50, MBR7H60
1
0.1
25
1
10
100
1
10
100
Number of Cycles at 60 Hz
Reverse Voltage (V)
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
Per Leg
Fig. 5 - Typical Junction Capacitance Per Leg
10
10
TJ = 150 °C
1
TJ = 25 °C
TJ = 125 °C
0.1
MBR7H35, MBR7H45
MBR7H50, MBR7H60
0.01
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2
Transient Thermal Impedance (°C/W)
Instantaneous Forward Current (A)
100
1
0.1
0.01
0.1
1
10
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 3 - Typical Instantaneous Forward Characteristics
Per Leg
Fig. 6 - Typical Transient Thermal Impedance Per Leg
Revision: 13-Aug-13
Document Number: 88796
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBR7Hxx, MBRF7Hxx, MBRB7Hxx
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-220AC
ITO-220AC
0.404 (10.26)
0.384 (9.75)
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.154 (3.91) DIA.
0.148 (3.74) DIA.
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
1
PIN
0.350 (8.89)
0.330 (8.38)
0.160 (4.06)
0.140 (3.56)
0.057 (1.45)
0.045 (1.14)
0.603 (15.32)
0.573 (14.55)
0.671 (17.04)
0.651 (16.54)
0.600 (15.24)
0.580 (14.73)
PIN
0.560 (14.22)
0.530 (13.46)
0.057 (1.45)
0.045 (1.14)
0.205 (5.20)
0.195 (4.95)
TO-263AB
0.411 (10.45)
0.380 (9.65)
0.190 (4.83)
0.160 (4.06)
0.245 (6.22)
MIN.
Mounting Pad Layout
0.42 (10.66) MIN.
0.055 (1.40)
0.045 (1.14)
0.33 (8.38) MIN.
0.360 (9.14)
0.320 (8.13)
K
2
0.624 (15.85)
0.591 (15.00)
Revision: 13-Aug-13
0.055 (1.40)
0.047 (1.19)
0.670 (17.02)
0.591 (15.00)
0 to 0.01 (0 to 0.254)
0.110 (2.79)
0.090 (2.29)
0.021 (0.53)
0.014 (0.36)
0.037 (0.940)
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
0.028 (0.71)
0.020 (0.51)
0.205 (5.21)
0.195 (4.95)
K
1
0.110 (2.79)
0.100 (2.54)
0.035 (0.89)
0.025 (0.64)
0.025 (0.64)
0.015 (0.38)
0.022 (0.56)
0.014 (0.36)
7° REF.
0.191 (4.85)
0.171 (4.35)
CASE
0.037 (0.94)
0.027 (0.68)
7° REF.
2
1
0.560 (14.22)
0.530 (13.46)
PIN 1
0.135 (3.43) DIA.
0.122 (3.08) DIA.
0.350 (8.89)
0.330 (8.38)
0.110 (2.79)
0.100 (2.54)
PIN 2
0.105 (2.67)
0.095 (2.41)
0.140 (3.56) DIA.
0.125 (3.17) DIA.
1.148 (29.16)
1.118 (28.40)
2
7° REF.
0.076 (1.93) REF.
45° REF.
0.635 (16.13)
0.625 (15.87)
0.190 (4.83)
0.170 (4.32)
0.110 (2.79)
0.100 (2.54)
0.076 (1.93) REF.
0.205 (5.20)
0.195 (4.95)
0.140 (3.56)
0.110 (2.79)
0.15 (3.81) MIN.
0.08 (2.032) MIN.
0.105 (2.67)
0.095 (2.41)
Document Number: 88796
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000