Specification for a Sine Output Thru-Hole OCXO MtronPTI P/N: XO5123-LPOCXOs Frequency offering: 10MHz to 40MHz High Stability, Low Aging and Ultra-Low Phase Noise Custom features: Oven Monitor, Oscillator Enable Logic, low g-sens available Applications: Test Equipment, Satcom, RADAR Electrical Specifications: Unless otherwise specified; T= +25°C, VS = +5VDC, VC = +0VDC, Load= 50Ω Symbol Min. Typ. Max. Units FO 10.000000 MHz -0.1 +0.1 ppm Frequency Stabilities -10 +10 ppb -2.0 +2.0 ppb -2.5 +2.5 ppb -0.5 +0.5 ppb -0.1 +0.1 ppm Parameter Nominal Frequency Initial Frequency vs. Temperature Range vs. Supply Voltage vs. Load Aging/Day Aging/Year Short Term Stability (Allan deviation) RF Output Output Type Output Load Level 5 VOH Method Sinewave 50 +10 Frequency Adjustment External Voltage Tuned Tuning Slope Tuning Voltage Modulation Bandwidth SSB Phase Noise (Static) achieved after warmup x10 -12 Ω dBm 0 1 2.5 At time of shipment -20°C to +70°C note1 ±5% change in voltage ±5% change in load After 30-days Power On Per Second. ±5% In a 50Ω load Custom tune slope available Positive VTUNE Conditions/Options +5 VDC kHz Other Parameters Standard Version Phase Noise -105 -137 -155 dBc/Hz -162 -169 -169 Low Phase Noise Version -112 -142 -155 dBc/Hz -162 -170 -170 @ 1Hz Offset @ 10Hz Offset @ 100Hz Offset @ 1kHz Offset @ 10kHz Offset @ 100kHz Offset @ 1Hz Offset @ 10Hz Offset @ 100Hz Offset @ 1kHz Offset @ 10kHz Offset @ 100kHz Offset 1 of 3 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI. Specification for a Sine Output Thru-Hole OCXO MtronPTI P/N: XO5123-LPOCXOs Ultra-low Phase Noise Version -115 -143 -158 dBc/Hz -165 -170 -172 Warm-up Time ΔF/F Harmonics Spurious Supply Voltage VS 5 -30 -80 Supply Voltage & Power Consumption 4.75 5.0 5.25 Minutes @ 1Hz Offset @ 10Hz Offset @ 100Hz Offset @ 1kHz Offset @ 10kHz Offset @ 100kHz Offset To be within ±100ppb, @ 25˚C, referenced to the frequency after 24-hour power on dBc dBc VDC note2 2.5 Watts Steady state @ 25°C, in still air 4.5 Watts In still air @ turn on Max. +70 Units °C +85 °C Power Consumption Environmental Conditions: Parameter Operating Temperature Storage Temperature Symbol OTR Min. -20 STR -55 Typ. Vibration (survival) Per MIL-STD 202G, Method 204, Condition A Shock (survival) Per MIL-STD 202G, Method 213, Condition C Solderability Per EIAJ-STD-002 RoHS Full RoHS Compliance note1: Wider operating temperature options available note2 : 12V and other custom Vcc available Mechanical and Pinout Information: Pin 1 2 3 4 5 6 7 Function VTUNE N/C Supply Voltage Enable / Disable RFOUT Ground Oven Monitor 2 of 3 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI. Conditions Specification for a Sine Output Thru-Hole OCXO MtronPTI P/N: XO5123-LPOCXOs Representative Phase Noise Plot (10MHz): Data Sheet Revision Table: Date Rev. Orig. Details of Revision 09-10-15 A DD Original release 3 of 3 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI.