2N4212 2N4216, 2N4219.aspx?ext=

2N4212-2N4216,
2N4219
1.6A SILICON CONTROLLED RECTIFIERS
High-reliability discrete products
and engineering services since 1977
FEATURES


Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix.
MAXIMUM RATINGS
Rating
Symbol
Peak repetitive forward and reverse blocking voltage
2N4212
2N4213
2N4214
2N4215
2N4216
2N4219
Value
Unit
(1)
25
50
100
150
200
400
VDRM or VRRM
Forward current RMS
(All conduction angles)
IT(RMS)
Volts
Amps
1.6
Peak surge current
(One cycle, 60Hz)
No repetition until thermal equilibrium is restored
ITSM
15
Amps
Forward peak gate power
PGFM
0.1
Watt
Forward average gate power
PGF(AV)
0.01
Watt
IGFM
0.1
Amp
Forward peak gate voltage
VGFM
6
Volts
Reverse peak gate voltage
VGRM
6
Volts
Operating junction temperature range
TJ
-65 to 125
°C
Storage temperature range
Tstg
-65 to 150
°C
-
230
°C
Forward peak gate current
Lead solder temperature
(> 1/16” from case, 10 s max.)
Note 1: VDRM and VRRM can be applied for all types on a continuous dc basis without incurring damage.
ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted, RGK = 1000 ohms)(1))
Characteristic
Peak forward or reverse blocking current
(Rated VDRM or VRRM, gate open)
TJ = 25°C
TJ = 125°C
Forward “on” voltage
(ITM = 1Adc peak)
Gate trigger current (continuous dc)(2)
(VD = 7V, RL = 100ohms)
Min
Max
Unit
IDRM, IRRM
-
10
200
µA
-
1.5
-
100
300
µAdc
0.1
0.8
1
-
Volts
-
3
7
mA
VTM
TC = 25°C
TC = -65°C
Gate trigger voltage (continuous dc)
(VD = 7V, RL = 100ohms, TC = 25°C)
(VD = 7V, RL = 100ohms, TC = -65°C)
(VD = rated VDRM, RL = 100ohms, TJ = 125°C)
Holding current
(VD = 7V)
Symbol
IGT
VGT
TC = 25°C
TC = -65°C
IHX
Volts
Note 1: Thyristor devices shall not be tested with a constant current source for forward or reverse blocking capability such that the voltage applied exceeds the rated blocking voltage. Thyristor devices shall
not have a positive bias applied to the gate concurrently with a negative potential applied to the anode.
Note 2: RGK current is not included in the measurement.
Rev. 20131210
High-reliability discrete products
and engineering services since 1977
2N4212-2N4216,
2N4219
1.6A SILICON CONTROLLED RECTIFIERS
MECHANICAL CHARACTERISTICS
Case
TO-39
Marking
Alpha-numeric
Pin out
See below
CASE TEMPERATURE VS. CURRENT
AMBIENT TEMPERATURE VS. CURRENT
Rev. 20131210