V i shay I n t e r t e ch n o l o g y, I n c . I INNOVAT AND TEC O L OGY FC Series N HN THIN FILM RESISTORS O 19 62-2012 Resistors - High Frequency up to 20 GHz High-Frequency Thin Film Chip Resistors Key Benefits • • • • Small size (20 mil x 40 mil min) Frequency response: 20 GHz Tolerances to 0.1 % Termination solder (lead or lead (Pb)-free), ribbon- or wire-bondable APPLICATIONS • • • • Low-noise amplifiers High-speed routers Attenuation circuitry High-frequency line termination Resources • Datasheet: FC Series - http://www.vishay.com/doc?60093 • For technical questions contact [email protected] One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT9121-1208 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i shay I n t e r t e ch n o l o g y, I n c . AND TEC FC O L OGY INNOVAT I N HN THIN FILM RESISTORS O Dale Thin Film FC FCVishay Series Vishay Dale Thin Film High Frequency (up to 20 GHz) Resistor, Film Surface Mount High Thin Frequency (up to 20 GHz)Chip Resistor, High-Frequency Thin Film Chip Resistors FEATURES 19 62-2012 Thin Film Surface Mount Chip • Small standard size 0402 case size FC series chip resistors are designed with low internal reactance. They function as almost pure resistors on a very FC series resistors are The designed with low high range chip of frequencies. specialized laserinternal edge reactance. They for function as almost pure to resistors trimming allows precision tolerances 0.1 %. on a very high range of frequencies. The specialized laser edge trimming allows for precision tolerances to 0.1 %. TEST • • • • • • • • • • • • • • Edge trimmed block resistors Small standard size 0402 case size Alumina substrate high purity (99.6 %) Edge trimmed block resistors Ohmic range (10 to 1000 ) Alumina substrate high purity (99.6 %) Small internal reactance (< 10 m) Ohmic range (10 to 1000 ) Low TCR (down to ± 25 ppm/°C) Small internal reactance (< 10 m) Epoxy bondable termination available Low TCR (down to ± 25 ppm/°C) Compliant to RoHS Directive 2002/95/EC Epoxy bondable termination available •APPLICATIONS Compliant to RoHS Directive 2002/95/EC • Low noise amplifiers APPLICATIONS • • • • Attenuation Low noise amplifiers Line termination Attenuation • Line termination STANDARD ELECTRICAL SPECIFICATIONS SPECIFICATIONS CONDITIONS Passivated nichrome SPECIFICATIONS 10 to 1000 Passivated nichrome ± 25 ppm/°C (standard) ( 50 ) to ± 100 ppm/°C 10 to 1000 ± 0.1 % to ± 5.0 % ± 25 ppm/°C (standard) ( 50 ) to ± 100 ppm/°C R ± 0.02 % ± 0.1 % to ± 5.0 % R ± 0.02 % 0.1 ppm/V 30 V to 75 V 0.1 ppm/V - 55 °C to + 125 °C 30 V to 75 V - 55 °C to + 150 °C - 55 °C to + 125 °C < - 35 dB - 55 °C to + 150 °C R ± 0.01 % < - 35 dB CONDITIONS Case size dependent - 55 °C to + 125 °C Case size dependent + 25 °C - 55 °C to + 125 °C 2000 h at 70 °C + 25 °C 2000 h at 70 °C 1 year at + 25 °C - R ± 0.01 % 1 year at + 25 °C STANDARD ELECTRICAL SPECIFICATIONS Material TEST Resistance Range Material TCR: Absolute Resistance Range Tolerance: Absolute TCR: Absolute Stability: Absolute Tolerance: Absolute Stability: Ratio Stability: Absolute Voltage Coefficient Stability: Ratio Working Voltage Voltage Coefficient Operating Temperature Range Working Voltage Storage Temperature Range Operating Temperature Range Noise Storage Temperature Range Shelf Life Stability: Absolute Noise Shelf Life Stability: Absolute COMPONENT RATINGS CASE SIZE POWER RATING (mW) WORKING VOLTAGE (V) RESISTANCE RANGE () 0402 CASE SIZE 0505 0402 0603 0505 0805 0603 1005 0805 1206 1005 50 POWER RATING (mW) 125 50 125 125 200 125 250 200 330 250 30 WORKING VOLTAGE (V) 37 30 50 37 50 50 75 50 75 75 10 to 1000 RESISTANCE RANGE () 20 to 1000 10 to 1000 10 to 1000 20 to 1000 10 to 1000 10 to 1000 10 to 1000 10 to 1000 10 to 1000 10 to 1000 330 75 10 to 1000 COMPONENT RATINGS Revision 05-Dec-11 Resistors - High Frequency up to 20 GHz FEATURES 1206 * Pb containing terminations are not RoHS compliant, exemptions may apply ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 * Pb containing terminations exemptions may apply [email protected] Document Number: 60093 are not RoHS compliant, For technical questions, contact: www.vishay.com ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 Revision: 05-Dec-11 73 PRODUCT SHEET 2/2 VMN-PT9121-1208 This document is subject to change without notice. Document Number: 60093 For technical questions, contact: [email protected] www.vishay.com THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 05-Dec-11 73 document subject to change without notice. This document is subject to change withoutThis notice. THEisPRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000