MARINE Switches, Circuit Protection & ELCI/GFCIs SELECTOR GUIDE ROCKERS NEW V-Series NEW V-Series Rotary V-Charger W-Series Poles 1, 2 1, 2 1 1, 2 Ratings up to 15A 24VDC 15A 125VAC 10A 250VAC up to 15A 24VDC 20A 12VDC 12V/24V DC up to 10A 24VDC Actuator rocker, paddle, locking rocker ergonomic knob sealed spring-loaded access doors bezel-less rocker, paddle & locking rocker Mounting Hole Specifications .830” x 1.450” [21.08mm x 36.83mm] snap-in mount .830” x 1.450” [21.08mm x 36.83mm] snap-in mount .830” x 1.450” [21.08mm x 36.83mm] snap-in mount .830” x 1.450” [21.08mm x 36.83mm] snap-in mount Termination .250 tabs solder lug wire leads solder lugs .250 tabs wire leads .250 tabs .110 tabs Sealing IP66 above panel IP67 above panel IP64 above panel IP68 above and below panel, fully submersible Illumination incandescent, LED, neon incandescent, LED LED LED Approvals UL, CSA, VDE pending n/a n/a TOGGLES LT-Series PUSHBUTTON F-Series G-Series P27-Series Poles 1, 2 1 1, 2 1 Ratings up to 15A 125VAC 10A 250VAC 15A 12-28VDC up to 20A 125VAC 20A 277VAC 2 HP 250VAC up to 20A 125VAC 20A 277VAC 2 HP 250VAC up to 6A 125VAC 3A 277VAC Actuator paddle, toggle (bat) paddle, toggle (bat) paddle, toggle (bat) nylon concave pushbutton Mounting Hole Specifications .500” dia [12.7mm] bushing mount .500” dia [12.7mm] bushing mount .500” dia [12.7mm] bushing mount .500” dia [12.7mm] bushing mount Termination .187 tabs solder lug .250 tabs screw terms wire leads PC terms .187 tabs solder lug .250 tabs screw terms wire leads PC terms .187 tabs solder lug .250 tabs screw terms wire leads PC terms .250 tabs solder lug wire leads Sealing standard bushing o-ring optional bushing o-ring optional bushing o-ring n/a Illumination incandescent, neon n/a n/a n/a Approvals n/a UL, CSA, VDE UL, CSA, VDE UL CSA *Options and approvals shown may apply to specific construction combinations only, consult factory for clarification. Manufacturer reserves the right to change product specifications without prior notice. HYDRAULIC-MAGNETIC CIRCUIT PROTECTION M-Series Number of Poles Actuator Style A-Series E-Series 1-6 sealed metal toggle handle rocker paddle handle rocker sealed metal toggle handle rocker handle AC, DC, AC/DC: instantaneous, ultra-short, short, medium & long AC, DC: high inrushshort, medium & long AC, DC, AC/DC: instantaneous, ultra-short, short, medium & long AC, DC: high inrush-short, medium & long AC, DC, AC/DC: instant, ultrashort, short, medium & long AC, DC: high inrush-short, medium & long AC, DC, AC/DC: instant, short, medium & long AC, DC, AC/DC: high inrush-short, medium & long 0.02-30A@277VAC, 80VDC 02-30A@125/250VAC, 65VDC UL Listed: 0.02-250A@80VDC 0.1-100A@125VDC 0.02-70A@120VAC 0.02-20A@240VAC UL Recognized: 0.02-30A@480WYE/277VAC 2 Pole, 1Ø; 3 Pole, 3Ø 0.02-50A@277VAC 0.02-100A@250VAC, 80VDC 0.02-100A@120V/ 240VAC, 65VDC solid color: angled rocker, paddle, baton, push-toreset pushbutton, push-pull pushbutton two color: visi-rocker illuminated: angled rocker, flat rocker Available Delays AC/DC: instantaneous, short, medium, hi-inrush Max Current & Voltage Ratings 1 Pole: 0.02-15FLA@ 32VDC,125VAC 15.1-25GPA@32VDC,125VAC 0.02-12FLA@250VAC 0.02-7.5GPA@50VDC 0.02-30GPA@65VDC, 80VDC 2 Pole: 0.02-15FLA@65VDC, 250VAC 15.1-25GPA@65VDC, 250VAC Parallel Pole: 31-50GPA@80VDC Max Interrupting Capacity C-Series 1-6 1-2 1 Pole: 1,000A@32VDC 1,000A@125VAC 2 Pole: 1,000A@65VDC 1,000A@250VAC Parallel Pole: 600A@80VDC B-Series 1-6 (handle) 1-3 (rocker & metal toggle) 1-6 (handle) 1-3 (rocker & metal toggle) 0.02-30A@277VAC, 80VDC 31.0-50A@125/250VAC, 65VDC 7500A@80VDC, UL only 3000A@120/250VAC, UL only 5000A@277VAC, with fuse backup 7500A@80 VDC, UL only 3000A@125/250VAC, UL only 5000A@277VAC, with fuse backup UL Listed 50000A@80VDC 10000A@125VDC & 240VAC-5KA 5000A@480WYE/277VAC 10000A@600VAC, listed construction UL Recognized 5000A@125VDC 5000A@600VAC, without fuse backup with fuse backup Auxiliary Switch Rating 7A@250VAC 0.1A@125VAC (gold contacts) 7A (res.)@28VDC 4A (ind.)@28VDC 0.25A@80VDC contacts) contacts) 10.1A@250VAC 0.1A@125VAC (gold contacts) 0.5A@80VDC 10.1A@250VAC 1.0A@65VDC 0.1A@80VDC Available Circuits series and switch only parallel pole series, shunt, relay, switch only, series with remote shutdown, relay & shunt trip dual coil series, shunt, relay, switch only, series with remote shutdown, relay & shunt trip dual coil, mid-trip with alarm switch series, shunt, relay, switch only, series with remote shutdown, relay & shunt trip dual coil, mid-trip with alarm switch series, shunt,relay, switch only, series with remote shutdown Terminal Options .250” QC tabs, 8-32 screw with upturned lugs, 8-32, 10-32 screw (bus type), push in stud terminals .250” QC tabs 8-32 & 10-32 screw (& metric), PCB .250” QC tabs, 8-32 & 1032 screw (& metric), PCB 10-32 stud, 1/4-20 stud, 10-32 screw with saddle clamp, 7/16 clip & push-In 10-32 stud, 1/4-20 stud, 0-32 screw, 1/4-20 screw, box wire connector Mounting Method snap-in front panel threaded bushing threaded inserts: front panel snap-in threaded inserts: front panel snap-in threaded inserts rear or front panel Agency Approvals UL recognized, CSA, VDE, TUV, UL489A listed (rocker), UL1500, UL489A UL, CSA, VDE, TUV UL, CSA, VDE, TUV (rocker), UL1500, UL489, UL489A UL, CSA, VDE, TUV, UL1500, UL489, UL489A UL, CSA, VDE, UL1500, UL489 0.5A@65VDC 0.1A@80VDC 10.1A@125VAC 0.1A@125VAC (gold UL Recognized 0.02-100A@277VAC, 160VDC, 1 pole 0.02-100A@600VAC, 2 Pole 1Ø, 3 pole 3Ø 0.02-120A@125VDC, 1 pole UL Listed: 50000A@80VDC, 1P only 10000A@120VAC 5000A@125VDC/240VAC UL Recognized: 7500A@80VDC 3000A@125/250VAC, UL only 5000A@250VAC with fuse backup 10.1A@125VAC 0.1A@125VAC (gold UL Listed 0.02-100A@240VAC, 80VDC, 125VDC 0.5A@65VDC 0.1A@80VDC *Options and approvals shown may apply to specific construction combinations only, consult factory for clarification. Visit Us On The Web For More Information About Our Products WWW.CARLINGTECH.COM THERMAL CIRCUIT PROTECTION CMB-Series CLB-Series GFCI / ELCI CIRCUIT PROTECTION CLBA/CMBA-Series PB-Series PC-Series Number of Poles 1 1 1 1-3 poles, 3rd pole switched neutral 1-poles (1 circuit breaker + 1 GFCI sensor module), 120V, 2-pole (2 circuit breakers + 1 GFCI sensor module), 120/240V, or 120V with neutral break 2-pole (2 circuit breakers + 1 GFCI sensor module), 240VAC, 3-pole 120/240V with neutral break (sensor module has 2 pole width) Actuator pushbutton pushbutton n/a handle, rocker, flat rocker actuators handle, rocker, flat rocker, pushto-reset actuators Leakage Current Trip Level n/a n/a n/a 30mA & 6mA 30mA & 6mA For 30mA leakage trip: ≤ 22.2mA, shall not trip 30mA, shall trip within .10 seconds, complying with UL-1053 & ABYC E11. For 30mA leakage trip: ≤ 22.2mA, shall not trip 30mA, shall trip within .10 seconds, complying with UL-1053 & ABYC E11. For 6mA leakage trip: ≤25ms For 6mA leakage trip: ≤25ms Leakage Current Trip Time n/a n/a n/a Max Current & Voltage Ratings 3 to 20A, 125-250VAC, 32VDC 3 to 60A, 125-250VAC, 32VDC 3 to 40A, 125-250VAC, 32VDC 0.10-30A@120/240VAC 0.10-50A@120/240VAC - 240VAC Max Interrupting Capacity 2500A@32 VDC 2500A@32 VDC 2500A@32 VDC 5,000A 5,000A Available Circuits series trip manual reset series trip manual reset series trip auto reset series trip series trip Termination .250 tab .250 tab with 90° bend screw terminal screw term with 90º bend .250 tab .250 tab with 90° bend screw terminal screw term with 90º bend .250” tab, .250” tab with 90° bend .250 tab, 8-32, 10-32, M4,M5 screw with upturned lugs 8-32, 10-32, M4, M5 screw, bus type 10-32 threaded stud Mounting Method threaded bushing, front panel snap-in threaded bushing, front panel snap-in plug-in front panel front panel Approvals UL, CUL, CSA, TUV, CE, UL 1500 / ISO 8846 for ignition protection / marine UL, CUL, CSA, TUV, CE, UL 1500 / ISO 8846 for ignition protection / marine UL, CUL, TUV, UL 1500 / ISO 8846 for ignition protection / marine UL489, UL1077, UL1500 CSA Approved, UL 1053, UL 1500 *Options and approvals shown may apply to specific construction combinations only, consult factory for clarification. MARINE_SG_04_2016 60 Johnson Avenue | Plainville, CT 06062 | Phone: (860) 793-9281 | Fax: (860) 793-9231 | Email: [email protected]