Renewable Energy Catalog [pdf]

RENEWABLE
ENERGY
Circuit Breakers & Disconnects
CATALOG
• Rocker
• Toggle
• Pushbutton
• Rotary
CIRCUIT
PROTECTION
• Hydraulic-Magnetic
• Thermal
• GFCI / ELCI
CUSTOM
SOLUTIONS
• PDU’s
• Keypads
• Control Modules
STRATEGIC MARKETS SERVED:
On/Off Highway
Marine
Telecom/Datacom
Military
Renewable Energy
GLOBAL LOCATIONS:
ISO9001:2008
ISO/TS16949:2009
ISO9001:2008
ISO/TS16949:2009
ISO9001:2008
ISO/TS16949:2009
ISO14001:2004
ISO9001:2008
ISO/TS16949:2009
ISO14001:2004
ISO9001:2008
ISO/TS16949:2009
ISO14001:2004
ISO9001:2008
ISO/TS16949:2009
COMPETITIVE ADVANTAGES +
Vertical
Integration
Reliable &
On-Time Delivery
Excellent
Customer Service
MULTIPLEXED
POWER SYSTEMS
• HMI Devices & I/O Modules
• Programmable Displays
• Data Communication Interfaces
• Electrical Systems Monitoring
.....................................................................................................................
SWITCHES &
CONTROLS
...................
Since its founding, Carling
Technologies has continually
forged a tradition of leadership in
quality and product innovation.
...................
1920
There are few products that Carling Technologies hasn’t
turned “ON” and fewer industries that haven’t turned to
Carling for solutions. With ISO and TS registered
manufacturing facilities and technical sales offices
worldwide, Carling ranks among the world’s largest
manufacturers of circuit breakers, switches, power distribution
units, digital switching systems and electronic controls.
...................
FOUNDED IN
Innovative &
Eco-Friendly Products
OTHER SERVED
INDUSTRIES:
Medical
Industrial Control
Audio / Visual
Commercial Food
HVAC
Floor Care
Generators
Small Appliances
Security Systems
Test & Measurment
WORLDWIDE
NUMBERS:
2200+ 150+
EMPLOYEES
ENGINEERS
70 +
50+
DISTRIBUTORS
REP FIRMS
Renewable Energy
Circuit Breakers & Disconnects
When you integrate Carling Technologies circuit
breakers into your renewable energy generating systems,
you are guaranteed maximum protection against
harmful overcurrent. Further, Carling’s circuit breakers
utilize the hydraulic/magnetic principal offering
many advantages over other thermal magnetic circuit
breakers and fuses currently available. In other words,
using Carling Technologies circuit breakers protects not
only the power system itself, but it also safeguards the
structure where these systems are installed by eliminating
the fire hazard that can be caused by overcurrent.
Table of Contents
page
Product Selector Guide.......................................................2
CX-Series............................................................................... 3
C-Series............................................................................... 13
E-Series............................................................................... 34
F-Series................................................................................ 43
Time Delay Values.............................................................. 53
Within This Catalog, you will find comprehensive product information for each product series including
applications, specifications and ordering schemes.
Available Online are tools such as part configurator, product selectors and stock checks. For the latest information
on all our products, please visit www.carlingtech.com
Application Solution Engineers are readily available to assist you in selecting the appropriate product for
your application. For further assistance, please email us at [email protected]
Typical Photovoltaic System
CX-SERIES
C-SERIES
E-SERIES
F-SERIES
Combiner
Charge
Controller
DC
DC
In
Out
Main
Disconnect
F
AC
Breaker
Panel
H
H
N
N
G
G
AC
Out
Power Inverter
AC In
H
N
G
H
N
G
DC
In
Shunt
Circuit
Breaker
Control Cable
Meter
www.carlingtech.com
AC
Generator
Batter Bank
1000 Ah
1
Product Selector Guide
CIRCUIT PROTECTION
CX-Series
C-Series
E-Series
F-Series
Number of Poles
1-2, + auxiliary switch pole
1-6 (handle)
1-3 (rocker & metal toggle)
1-6
1-3
Actuator Style
handle, 1 per pole
sealed metal toggle
handle
rocker
handle
handle
Available Delays
DC: instant, ultrashort, short,
medium & long
AC, DC, AC/DC: instant,
ultrashort, short, medium & long
AC, DC: high inrush-short,
medium & long
AC, DC, AC/DC: instant, short,
medium & long
AC, DC, AC/DC: high inrushshort, medium & long
AC, DC: short, medium & long
Max Current &
Voltage Ratings
Max Interrupting
Capacity
UL Recognized
0.2-115A@600VDC
UL Listed
0.2-15A@250/500VDC
0.2-50A@205/410VDC
UL Listed and UL Recognized
up to 10,000 amps
UL Listed:
0.02-250A@80VDC
0.1-100A@125VDC
0.02-70A@120VAC
0.02-20A@240VAC
UL Recognized:
0.02-30A@480WYE/277VAC
2 Pole, 1Ø; 3 Pole, 3Ø
0.02-50A@277VAC
0.02-100A@250VAC, 80VDC
0.02-100A@120V/ 240VAC,
65VDC
UL Listed:
50000A@80VDC, 1P only
10000A@120VAC
5000A@125VDC/240VAC
UL Recognized:
7500A@80VDC
3000A@125/250VAC,
UL only 5000A@250VAC
UL Listed
0.02-100A@240VAC, 80VDC,
125VDC
UL Recognized
0.02-100A@277VAC, 160VDC,
1 pole
0.02-100A@600VAC,
2 Pole 1Ø, 3 pole 3Ø
0.02-120A@125VDC, 1 pole
UL Listed
50000A@80VDC
10000A@125VDC &
240VAC-5KA
UL Recognized
5000A@125VDC
5000A@600VAC, without fuse
listed construction
backup
fuse backup
with fuse backup
5000A@480WYE/277VAC with
UL489 Listed:
50-250A@125VDC
100-250A@120/240VAC
100-250A@277VAC
100-250A@208Y/120,
3ØVAC
UL489A Listed
250-700A@125VDC
50000A@125VDC
10000A@120/240, 277,
208Y/120VAC
10000A@600VAC,
20A@80VDC (GO circuit)
10.1A@250VAC
0.1A@125VAC (gold contacts)
0.5A@80VDC
10.1A@250VAC
1.0A@65VDC
0.1A@80VDC
10.1A@250VAC
0.5A@65VDC
0.1A@80VDC
Available Circuits
series trip
series, shunt, relay, switch only,
series with remote shutdown,
relay & shunt trip dual coil, midtrip with alarm switch
series, shunt,relay,
switch only, series
with remote shutdown
series & switch only
with or without metering shunt
Terminal Options
10-32 or M5 screw terminals
1/4-20 or M6 threaded stud
10-32 stud, 1/4-20 stud,
10-32 screw with saddle
clamp, 7/16 clip & push-In
10-32 stud, 1/4-20 stud, 0-32
screw, 1/4-20 screw, box wire
connector
3/8-16 stud, 3/8-16 screw &
box wire connector
Mounting Method
threaded insert: #6-32 UNC2B, or M3X0.5-6H B ISO (2
per pole)
threaded inserts
rear or front panel
rear or front panel
Agency Approvals
UL489, UL1077, TUV
(EN60934-2)
UL, CSA, VDE, TUV,
UL1500, UL489, UL489A
UL, CSA, VDE, UL1500, UL489
cUL,TUV, UL489, UL489A
Auxiliary Switch
Rating
*Options and approvals shown may apply to specific construction combinations only, consult factory for clarification.
Manufacturer reserves the right to change product specifications without prior notice.
2
www.carlingtech.com
CX-Series
CX-Series Circuit Breaker - Introduction
CX-Series
CIRCUIT BREAKER
The CX-Series circuit breaker features a unique and innovative arc-quenching configuration that allows the
breaker to safely handle high amperage and high DC voltage applications in a compact package. By using a
patent pending magnetic flux boosting terminal configuration, a strong magnetic field is created thus motivating
the arc into an enhanced arc chamber improving the breaker’s overall performance and reliability. The permanent
magnets located at the entrance of the arc chamber combined with the upper and lower arc runner increase
the magnetic blow out force and aid in motivating the arc off of the contacts and into the arc chamber. An
enhanced arc chamber features arc splitter retainers with integrated pressurizing walls, which facilitates heat
transfer from the arc thereby providing additional cooling and quick transition into the magnetically induced
splitter plates. In turn, the twelve (12) splitter plates attract, segment and cool the arc for full extinction
Combined, these innovative features make the CX-Series breaker the best in class, providing stable performance
even in the most demanding applications.
Resources:
Download 3D CAD Files
IGS
STP
Watch Product Video
Product Highlights:
UL 489 & UL 489B Listed
TUV Certified IEC/EN 60947-2
ŠŠ Temperature stable hydraulic-magnetic
overcurrent sensing technology
ŠŠ Optional relay trip circuit permitting remote
operator system shut down
ŠŠ Perfect fit for 380VDC Applications
ŠŠ
ŠŠ
www.carlingtech.com
3
CX-Series Circuit Breaker - Design Features
CX-Series
DESIGN FEATURES
HYDRAULIC/MAGNETIC
SENSING COIL
UPPER ARC RUNNER
Aids in motivating arc off of movable
contact and into arc chamber
PATENT PENDING MAGNETIC FLUX
BOOSTING TERMINAL CONFIGURATION
Design enhances motivation
of arc into arc chamber
4
LOWER ARC RUNNER
Aids in motivating arc
off of stationary contact
and into arc chamber
MAGNETS
ARC SPLITTER
RETAINER
with integrated
pressurizing walls
LARGE ARC GAP
To generate high
arc voltages
(12) ARC DEIONIZING
SPLITTER PLATES
www.carlingtech.com
CX-Series Circuit Breaker - General Specifications
Electrical Tables
Table A: Lists UL Listed (UL489) configuration and performance capabilities as a Molded Case Circuit Breaker
CX SERIES TABLE A : UL489 LISTED BRANCH CIRCUIT BREAKERS
VOLTAGE
CIRCUIT
CONFIGURATION
SERIES
MAX CURRENT INTERRUPTING
NUMBER
RATING AMPS CAPACITY (AMPS) OF POLES
MAX. RATING FREQUENCY
250
D.C.
15
5,000
1
250 / 500
D.C.
15
10,000
2
410 / 205
D.C.
50
10,000
2
Table B: Lists UL Recognized configurations and performance capabilities as a Component Supplementary Protector
CX SERIES TABLE B : UL1077 COMPONENT SUPPLEMENTARY PROTECTOR
VOLTAGE
CIRCUIT
CONFIGURATION
MAX.
RATING
SERIES
SWITCH ONLY1
MAX
INTERRUPTING
CURRENT
CAPACITY
(AMPS)
FREQUENCY RATING AMPS
NUMBER APPLICATION
OF POLES
CODE
300
D.C.
1 - 75
5,000
1
TC1, OL0, U3
300
D.C.
76 - 125
3,000
1
TC1, OL0, U3
440
D.C.
1 -30
10,000
2
TC1, OL0, U3
440
D.C.
31 - 63
5,000
2
TC1, OL0, U3
600
D.C.
1 - 75
5,000
2
TC1, OL0, U3
600
D.C.
76 - 115
3,000
2
TC1, OL0, U3
600
D.C.
1 - 115
----
2 or 3
---
Notes:
1 Requires inclusion of a relay trip voltage coil
Table C: Lists UL Listed (UL489B) configuration and performance capabilities as a Molded Case Switch
CX SERIES TABLE C : UL489B LISTED PHOTOVATIC MOLDED CASE SWITCH
VOLTAGE
CIRCUIT
CURRENT RATING INTERRUPTING
CONFIGURATION MAX RATING FREQUENCY POLES
(AMPS)
RATING (AMPS)
CONSTRUCTION
NOTES
600
DC
21
50 - 100
600
May have a third pole
that is a voltage
trip pole
600
DC
42
110 - 175
600
May have a fifth pole
that is a voltage
trip pole
SERIES
Notes:
1 Two poles in series.
2 Two poles in series in parallel with 2 poles in series.
Table D: TUV Certified Configuration to IEC / EN 60947-2. Low Voltage Switch gear and Control gear - Circuit Breakers
CX-SERIES TABLE D : TUV IEC/EN 60947-2 LOW VOLTAGE SWITCH GEAR &
CONTROL GEAR / CIRCUIT BREAKER
VOLTAGE
CIRCUIT
CONFIGURATION
SERIES
MAX.
RATING
FREQUENCY
POLES
440
DC
2
CURRENT RATING
(AMPS)
1-63
INTERRUPTING
CAPACITY
ICS / ICU
(AMPS)
4,000
*Manufacturer reserves the right to change product specification without prior notice.
www.carlingtech.com
5
CX-Series Circuit Breaker - General Specifications
Electrical
Maximum Voltage
Overload 600 VDC
50 operations at 600% of rated current for UL489, and at 150% of rated current for UL1077.
RESISTANCEIMPEDANCE
PER POLE VALUES
RESISTANCE,
VALUES
fromfrom
LineLine
to Load
Terminals
to Load
Terminals
(ValuesBased
Based on
on Series Trip
(Values
Trip Circuit
CircuitBreaker)
Breaker)
1000
100
5.1-20.0
0.10 - 5.0
20.1-125
5.1 - 20.0
10
O
H
M
S
Current
(amps)
CURRENT
0.1(AMPS)
-5.0
20.1 - 50.0
1
Tolerance
(%)
TOLERANCE
15%
(%)
25%
15
25
35%
35
0.1
0.01
0.001
0.01
0.1
1
10
100-125
100
AMPERE RATING
Physical
Number of Poles
Termination
Terminals
Termination Barrier
Mounting
Actuator
Internal Circuit Config.
Materials
Weight
Standard Color
6
1- 2 poles, + Auxiliary Switch Pole.
10-32 or M5 Screw Terminals
1/4-20 or M6 Threaded Stud
Standard with multi-pole constructions
Threaded insert: #6-32 UNC-2B, or M3X0.5-6H B ISO (2 per pole)
Handle, 1 per pole.
Series Trip
Housing - Glass filled Polyester
Handle - Glass filled Polyester
Line/Load Terminals - Copper Alloy.
~150 Grams (~5.3 Ounces).
~150 Grams (~5.3 Ounces).
Housing - Gray.
Handle - White, Black, Red, Green, Blue, Yellow, Gray,
Mechanical
Endurance
Max 10,000 ON-OFF operations @
6 per minute; 6000 with rated current & voltage, and 4,000 cycles mechanical.
Trip Free
Trips on overload even when actuator is forcibly held in the “On” position.
Trip Indication
The operating handle moves positively to the “Off” position when an overload causes the breaker
to trip.
Environmental
Shock
Vibration
Moisture Resistance
Salt Spray
Thermal Shock
Operating Temperature
Withstands 100 Gs, 6ms saw tooth while carrying rated current per MILPRF-55629 and MIL-STD-
202G, Method 213G, Test Condition “I”. Instantaneous and ultra short curves tested at 90% of rated current
Withstands 0.060” excursion from 10-55 Hz & 10 Gs 55-500 Hz, at rated current per MIL-PRF-55629 and MILSTD-202G, Method 240D, Test Cond. A. Instantaneous & ultrashort curves tested at 90% of rated current.
MIL-PRF-55629 and MIL-STD-
202G, Method 106G, i.e., Ten 24-
hour cycles at +25°C to +65°C, 80-
98% RH.
Method 101, Condition A (90-95% RH at 5% NaCl Solution, 96 hrs).
MIL-PRF-55629 and MIL-STD-
202G, Method 107G, Condition A (5-cycles at -55°C to +25°C to +85°C to +25°C).
-40°C to +85°C.
www.carlingtech.com
CX-Series Circuit Breaker - UL489 – Ordering Scheme
C X 1
1
Series
2
Actuator
B 0
4
Circuit
3
Poles
5
Aux/Alarm
Switch
14
615
6
Frequency
& Delay
7
Current Rating
9
Actuator
Color &
Legend
10
Mounting
Inserts
12 G
11
Rating
12
Agency
Approval
8 TERMINAL
2
Screw Terminal, 10-32
3
Stud, 1/4-20
5
Screw Terminal, M5
6
Stud, M6
1 SERIES
C
2 ACTUATOR
X
Handle, one per pole
9 ACTUATOR COLOR & LEGEND
Actuator Color
I-O
ON-OFF
White
AB
Black
CD
Red
FG
Green
HJ
Blue
KL
Yellow
MN
Gray
PQ
Orange
RS
3 POLES
1
One
2
Two
4 CIRCUIT
B
Series Trip (current)
5 AUXILIARY/ALARM SWITCH
0
Without Aux Switch
Dual
Legend Color
1Black
2White
3White
4White
5White
6Black
7Black
8Black
10 MOUNTING INSERTS
A
6-32 Thread
B
M3 Thread
6 FREQUENCY & DELAY
11 DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
11 MAX. APPLICATION RATING
12 250 VDC
13 250/500 VDC 1
15 205/410 VDC
7 CURRENT RATING (AMPERES)
CODE
2 2 A
8
Terminal
AMPERES
220 0.20
225 0.25
230 0.30
235 0.35
240 0.40
2450.45
250 0.50
255 0.55
260 0.60
265 0.65
270 0.70
275 0.75
280 0.80
285 0.85
290 0.90
295
410
512
415
517
420
522
425
527
430
435
440
445
450
455
0.95
1.00
1.25
1.50
1.75
2.00
2.25
2.50
2.75
3.00
3.50
4.00
4.50
5.00
5.50
www.carlingtech.com
460
465
470
475
480
485
490
495
610
710
611
711
612
712
613
6.00
6.50
7.00
7.50
8.00
8.50
9.00
9.50
10.00
10.50
11.00
11.50
12.00
12.50
13.00
614 14.00
615 15.00
616 16.00
61717.00
61818.00
62020.00
62222.00
62424.00
62525.00
63030.00
63535.00
64040.00
64545.00
65050.00
12 AGENCY APPROVAL
A
Without Approvals
G
UL 489 Listed
S
UL 489 Listed, TUV to IEC60947-2 1
Notes:
1 Only Available with 250/500 VDC up to 15 amps.
7
CX-Series Circuit Breaker - UL489B – Ordering Scheme
C X 2
1
Series
2
Actuator
3
Poles
S 0
4
Circuit
5
Relay Trip
1 SERIES
C
2 ACTUATOR
X Handle, one per pole
3 POLES 1,2
2
Two
3
Three
4
Four
5
Five
4 CIRCUIT
S Switch Only
5 RELAY TRIP VOLTAGE COIL RATING 1,2
0
Without Relay Trip Voltage Coil
A
12 VDC
B
24 VDC
C
32 VDC
D
48 VDC
6 FREQUENCY & DELAY
03
DC Switch Only
7 CURRENT RATING (AMPERES) 1,3
2-Pole Section
810 50A - 100A
4-Pole Section
917 110A - 175A
8
03
810
6
Frequency
& Delay
7
Current Rating
3 2 A
8
Terminal
9
Actuator
Color &
Legend
06 14
10
Mounting
Inserts
11
Rating
12
Agency
Approval
8 TERMINAL 4,5
3
Stud, 1/4-20
6
Stud, M6
A Stud, 1/4-20, with 10-32 Screw Terminals on Voltage Pole
B Stud, M6, with M5 Screw Terminals on Voltage Pole
9 HANDLE COLOR & LEGEND
Actuator Color
I-O
ON-OFF
White
AB
Black
CD
Red
FG
Green
HJ
Blue
KL
Yellow
MN
Gray
PQ
Orange
RS
10 MOUNTING INSERTS
A
6-32 Thread
B
Dual
Legend Color
1Black
2White
3White
4White
5White
6Black
7Black
8Black
M3 Thread
11 MAX. APPLICATION RATING
06 600VDC
12 AGENCY APPROVAL
A
Without Approvals
14 UL489B Listed
Notes:
1 2 Pole Unit is required for ratings between 50A - 100A.
4 Pole Unit is required for ratings between 110A - 175A.
2 A Relay Trip Voltage Coil Pole may be added to either the 2 or 4 Pole construction.
The addition of this extra pole dictates a change in the designation for the number of poles in selection 3.
3 For Current Ratings between 50A - 100A select current code 810 (100A).
For Current Ratings between 101A - 175A select current code 917 (175A).
4 Voltage Pole must have screw terminals.
Switch Pole must have stud terminals.
5 On 3 Pole Unit, Voltage Pole to be located at P1 as standard.
On 5 Pole Unit, Voltage Pole to be located at P3 as standard.
www.carlingtech.com
CX-Series Circuit Breaker - UL1077 – Ordering Scheme
C X 1
1
Series
2
Actuator
B 0
4
Circuit
3
Poles
5
Aux/Alarm
Switch
14
620
6
Frequency
& Delay
7
Current Rating
2 ACTUATOR
X
Handle, one per pole
4 CIRCUIT
Switch Only (no coil) 1, 9
A
B
Series Trip (current)
Relay Trip (voltage) 1, 2, 3, 9
G
11
Rating
12
Agency
Approval
Dual
Legend Color
1Black
2White
3White
4White
5White
6Black
7Black
8Black
11 MAX. APPLICATION RATING
10 300VDC
11 440 VDC without factory installed terminal bus 4
14 440VDC with factory installed terminal bus 4
06 600VDC 5
6 FREQUENCY & DELAY
03 DC 50/60Hz, Switch Only
10 DC Instantaneous
11 DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
12 AGENCY APPROVAL
A
Without Approvals
C
UL 1077 Recognized
W
UL 1077 Recognized & TUV Certified IEC/ EN 60947-2 9
7 CURRENT RATING (AMPERES) 6
AMPERES
415
517
420
522
425
527
430
435
440
445
450
455
460
465
470
475
480
485
10
Mounting
Inserts
10 MOUNTING INSERTS
A
6-32 Thread
B
M3 Thread
5 AUXILIARY SWITCH
0
Without Aux Switch
CODE
9
Actuator
Color &
Legend
9 ACTUATOR COLOR & LEGEND
Actuator Color
I-O
ON-OFF
White
AB
Black
CD
Red
FG
Green
HJ
Blue
KL
Yellow
MN
Gray
PQ
Orange
RS
3 POLES 7
1
One
2
Two
3
Three
4Four 10
220 0.200
225 0.250
230 0.300
235 0.350
240 0.400
2450.450
250 0.500
255 0.550
260 0.600
265 0.650
270 0.700
275 0.750
280 0.800
285 0.850
290 0.900
295 0.950
410 1.000
512 1.250
8
Terminal
10 C
8 TERMINAL 8
2 Screw, 10-32
3 Stud, 1/4-20
5 Screw, M5
6 Stud, M6
1 SERIES
C
2 2 A
1.500
1.750
2.000
2.250
2.500
2.750
3.000
3.500
4.000
4.500
5.000
5.500
6.000
6.500
7.000
7.500
8.000
8.500
www.carlingtech.com
490 9.000
495 9.500
610 10.000
710 10.500
611 11.000
711 11.500
612 12.000
712 12.500
613 13.000
614 14.000
615 15.000
616 16.000
617 17.000
618 18.000
620 20.000
62222.000
624 24.000
62525.000
63030.000
63535.000
64040.000
65050.000
66060.000
66565.000
670 70.000
67575.000
680 80.000
68585.000
69090.000
69595.000
810100.000
911115.000
912125.000
Notes:
1 Only available when tied to a protected pole
Requires special P/N consult factory for details
2 Voltage trip circuit coil not rated for continuous duty - use instantaneous delay code 10
3 Contacts Rated for 20A @ 80 VDC
4 440VDC Rating available in two different wiring configurations.
(see next page for more details)
5 600 VDC only available with factory installed terminal bus (see next page for more details)
6 Single pole units available up to 125A, multi pole units limited to 115A Max.
(see next page for more details)
7 3 Pole units must include one Auxiliary switch pole (circuit code A or G) - Requires Special Part Number. (see next page for more details)
8 Screw Terminals are limited to 50A max.
9 Agency approval code W only available with 440 VDC rating & circuit code B.
10 4 Pole 600 VDC units only available up to 75A Max. (see next page for more details)
9
C-Series Circuit Breaker - Handle UL489 Listed – Ordering Scheme
Dimensional Specifications: in. [mm]
0.755
0.755
[19.18]
[19.18]
MAXIMUM
MAXIMUM
0.380
[9.65]
0.579
[14.72]
1.052
[26.72]
1.052
[26.72]
+0.050
3.094 –0.020
78.59 +1.27
–0.50
2.062+0.020
[52.37+0.50]
1.052
[26.72]
2.259+0.020
[57.38+0.50]
1.719
1.719
[43.66]
[43.66]
0.265
[6.73]
0.380
0.380
[9.65]
0.755
[9.65]
[19.18]
MAXIMUM
+0.050
3.094
+0.050
–0.020
3.094 –0.020
+1.27
78.59
+1.27
2.062+0.02078.59 –0.50
–0.50
2.062+0.020
[52.37+0.50]
[52.37+0.50]
1.719
[43.66]
0.502
[12.75]
0.502
0.502
[12.75]
[12.75]
1.843+0.020
1.843+0.020
[46.81+0.50]
[46.81+0.50]
30.0º
30.0º
0.124
[3.16]
0.124
[3.16]
1.843+0.020
[46.81+0.50]
2.264+0.020
[57.51+0.50]
2.264+0.020
[57.51+0.50]
0.626+0.020
[15.90+0.50]
0.626+0.020
[15.90+0.50]
30.0º
0.124
[3.16]
1.017
[25.82]
1.017
[25.82]
0.626+0.020
[15.90+0.50]
2.264+0.020
[57.51+0.50]
1.515
[38.48]
1.515
MAXIMUM
[38.48]
MAXIMUM
1.515
[38.48]
MAXIMUM
2.259+0.020
2.259+0.020
[57.38+0.50]
[57.38+0.50]
0.265
0.265
[6.73]
[6.73]
0.579
0.579
[14.72]
[14.72]
SHOWN WITH STUD
TERMINAL
SHOWNCONFIGURATION
WITH STUD
TERMINAL CONFIGURATION
SHOWN WITH STUD
TERMINAL CONFIGURATION
3.672
[93.268]
3.672
[93.268]
1.017
[25.82]
2.259
[57.38]
2.259
[57.38]
3.672
[93.268]
&
(205/410
VDC)
&
(205/410 VDC)
2.259
[57.38]
0.744
[18.90]
0.744
[18.90]
&
05/410 VDC)
0.744
[18.90]
2.736
[69.49]
(WITH SCREW TERMINAL)
2.946
[74.83]
(WITH STUD TERMINAL)
3.276
[83.21]
(UNFOLDED BARRIER)
2.736
[69.49]
2.736
(WITH SCREW TERMINAL)
[69.49]
2.946
(WITH SCREW
TERMINAL)
[74.83]
2.946
(WITH STUD TERMINAL)
[74.83]
3.276
(WITH STUD TERMINAL)
[83.21]
3.276 BARRIER)
(UNFOLDED
SHOWN WITH
SCREW
[83.21]
TERMINAL CONFIGURATION
(UNFOLDED BARRIER)
SHOWN WITH SCREW
TERMINAL CONFIGURATION
SHOWN WITH SCREW
TERMINAL CONFIGURATION
TOLERANCES1.520
+.005[.12]
[38.61]
TOLERANCES
+.005[.12]
0.760
[19.30]
1.062
[26.97]
TOLERANCES +.005[.12]
1.520
[38.61]
1.520
0.760
[38.61]
[19.30]
0.760
[19.30]
1.062
[26.97]
1.062
2.062[26.97]
0.078 TYP
[52.37]
2.062[1.98]
[52.37]
CX1
0.625
[15.88]
CX1 CX2
0.625
[15.88]
CX2
0.078 TYP
[1.98]
0.078 TYP
[1.98]
0.750 TYP
[19.05]
0.750 TYP
[19.05]
2.062
[52.37]
0.625
[15.88]
CX1
CX2
0.750 TYP
[19.05]
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
10
www.carlingtech.com
CX-Series Circuit Breaker - UL489B – Dimensional Specifications
Dimensional Specifications: in. [mm]
OPTIONAL VOLTAGE POLE
SEE NOTE 1
POLE 1
CX3
POLE 2
CX2
POLE 3
CX3 - 2 POLE SWITCH (CX2)SHOWN
WITH OPTIONAL VOLTAGE POLE
50A-100A DEVICE, 600VDC
POLE 1
OPTIONAL VOLTAGE POLE
SEE NOTE 2
POLE 2
SEE NOTE 3
POLE 3
POLE 4
POLE 5
CX5 - 4 POLE SWITCH (CX4)SHOWN
WITH OPTIONAL VOLTAGE POLE
101A-175A DEVICE, 600VDC
Notes:
1 All dimensions are in inches [millimeters].
2 3 pole configuration supplied with voltage coil on pole 1. Optional location pole 3. Consult factory.
3 5 pole configuration supplied with voltage coil in center pole. (Pole 3)
4 Line & Load connections requires bus connection as shown.
Minimum cross selection .127 in2 (81.94 mm2)
www.carlingtech.com
11
CX-Series Circuit Breaker - UL1077 – Dimensional Specifications
Dimensional Specifications: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 600V Rating requires minimum of 2 protected poles
12
www.carlingtech.com
C-Series
C-Series Circuit Breaker - Introduction
C-Series
CIRCUIT BREAKER
The C-Series hydraulic-magnetic circuit breakers are ideal for applications that require higher amperage and
voltage handling capability in a smaller package. They are available in 1-6 poles, 0.02-100amps, UL Recognized
up to 480VAC or 150VDC, UL489 Listed up to 240VAC or 125VDC, with choice of time delays, terminal
options, actuator styles and colors. The C-Series employs a unique arc chute design which allows for higher
interrupting capacities of up to 10,000 amps. New thermoset glass filled polyester half shell construction
provides for increased mechanical and electrical strength. The wiping contacts, mechanical linkage with two
step actuation, clean contacts providing high, positive contact pressure and longer contact life. Available with
American Standard or Metric Threaded Stud terminals , or Saddle Clamp screw terminals. The optional mid-trip
handle style actuator allows a visual indication of electrical overload with or without alarm feature.
Product Highlights:
Extensive list of Agency Approvals
ŠŠ Available with Standard or Metric Stud terminals,
or Saddle Clamp screw terminals
ŠŠ Optional mid-trip handle style actuator
ŠŠ Unique arc chute design which allows for higher
interrupting capacities of up to 10,000 amps
ŠŠ Exclusive Rockerguard and Push-To-Reset bezel
ŠŠ Available with new solid color and two-color Visirocker® actuators
ŠŠ New thermoset glass filled polyester half shell
construction
ŠŠ
Only Renewable Energy applicable ordering schemes and drawings are shown in this catalog.
For complete product details, please visit www.carlingtech.com
www.carlingtech.com
13
C-Series Circuit Breaker - General Specifications
Electrical
Maximum Voltage AC, 480 WYE/277 VAC, 50/60 Hz
(see Table A.)
UL489: AC,240 VAC. (See Table D),
50/60 Hz, 125 VDC
Current Rating Standard current coils: 0.100, 0.250, 0.500, 0.750, 1.00, 2.50, 5.00, 7.50, 10.0, 15.0, 25.0, 30.0, 35.0, 40.0, 50.0, 60.0, 70.0, 80.0, 90.0 and 100 amps. Other ratings available, see Ordering Scheme.
Standard Voltage Coils DC - 6V, 12V; AC - 120V; other ratings available, see Ordering
Scheme.
Auxiliary Switch Rating SPDT; 10.1 amps-250VAC, DC Aux.
Switch 1.0A, 65 VDC. 0.5A, 80VDC,1/4 HP, 125VAC,VDE & TUV
1.0 125 VAC.
Insulation Resistance Minimum of 100 Megohms at 500 VDC.
Dielectric Strength UL, CSA: 1960 V 50/60 Hz for one
minute between all electrically isolated terminals. C-Series Circuit
Breakers comply with the 8mm spacing and 3750V 50/60 Hz
dielectric requirements from hazardous voltage to operator accessible surfaces, between adjacent poles and from main circuits to auxiliary circuits per Publications EN 60950 and
VDE 0805.
Resistance, Impedance Values from Line to Load Terminal based on Series Trip Circuit Breaker.
Mechanical
Endurance 10,000 ON-OFF operations @ 6 per
minute; with rated current & voltage.
Trip Free All C-Series circuit breakers will trip
on overload, even when actuator is
forcibly held in the ON position.
Trip Indication The operating actuator moves positively to the OFF position when an overload causes the breaker to trip. With mid-trip, handle moves to the mid position on electrical trip of the circuit breaker. With mid trip handle with alarm switch, handle moves to the mid position and the alarm switch actuates when the
circuit breaker is electrically tripped.
Physical
Number of Poles Internal Circuit Config. Weight Standard Colors 1-6 poles ≤ 50A; 1-4 poles @ 5170A; 1-2 poles 71-100A. UL489
Handle: 1 pole ≤ 100A, 2 pole ≤
50A; Rocker: 1 pole ≤ 100A.
Series (with or without auxiliary
switch, mid trip & mid trip with alarm switch) Shunt & Relay with current or voltage trip coils, Dual Coil, Switch Only (with or without aux. switch). UL489: Series (with or without auxiliary switch, mid-trip & midtrip with alarm switch).
Approx.112 grams/pole ( 3.95 oz).
Housing: Black
RESISTANCE, IMPEDANCE VALUES
from Line to Load Terminals
(Values Based on Series Trip Circuit Breaker )
1000
CURRENT
TOLERANCE
(AMPS)
(%)
0.10 - 5.0
5.1 - 20.0
15
25
20.1 - 50.0
35
100
10
O
H
M
S
1
60 Hz 1/2 Cycle
Inrush Pulse Tolerance
0.1
Multiple of
Rated Current
Ir
0.01
0.001
0.01
0.1
1
10
Time Delay Curves
42, 44 & 46
(50 Amps Max.)
25x
Time Delay Curves
22, 24 (100 Amps Max.)
26 (70 Amps Max.)
12x
100
t
AMPERE RATING
4.165
8.33
16.67
Pulse Tolerance Curves
CURRENT
(AMPS)
TOLERANCE
(%)
0.100 - 5.0
15%
60 Hz5.1
1/2- 20.0
Cycle
20.1 -Tolerance
100
Inrush Pulse
25%
35%
Ir
FIGURE
Time Delay
Curves 1
Multiple of
Rated Current
Multiple of
Rated Current
Ir
42, 44 & 46
(50 Amps Max.)
25x
Time Delay Curves
22, 24 (100 Amps Max.)
26 (70 Amps Max.)
12x
Time Delay Curves
42, 44 & 46
(50 Amps Max.)
22x
Time Delay Curves
22, 24 (100 Amps Max.)
26 (70 Amps Max.)
10x
t
t
4.165
Ir
Multiple of
Rated Current
50 Hz 1/2 Cycle
Inrush Pulse Tolerance
8.33
5.0
10.0
16.67
50 Hz 1/2 Cycle
Inrush Pulse Tolerance
Time Delay Curves
42, 44 & 46
(50 Amps Max.)
22x
Time Delay Curves
22, 24 (100 Amps Max.)
26 (70 Amps Max.)
10x
20.0
Time in
Milliseconds
Environmental
Designed and tested in accordance with requirements of
specification MIL-PRF-55629 & MIL-STD-202 as follows:
Shock Withstands 100 Gs, 6ms sawtooth
while carrying rated current per
Method 213, Test Condition “I”.
Instantaneous and ultrashort curves
tested @ 90% of rated current.
Vibration Withstands 0.060” excursion from 10-55 Hz & 10 Gs 55-500 Hz, @ rated current per Method 204C, Test Cond. A. Instantaneous & ultrashort curves tested @ 90% of rated current.
Moisture Resistance Method 106D, i.e., ten 24-hour
cycles @ +25°C to +65°C,
80-98% RH.
Salt Spray Method 101, Condition A (90-95%
RH @ 5% NaCl Solution, 96 hrs).
Thermal Shock Method 107D, Condition A (five cycles @ -55°C to +25°C to +85°C to +25°C).
Operating Temperature -40°C to +85°C
t
5.0
10.0
20.0
*Manufacturer reserves the right to change product specification without prior notice.
Time in
Milliseconds
14
www.carlingtech.com
C-Series Circuit Breaker - General Specifications
Electrical Tables
Table A: Lists UL Recognized & CSA Accepted configurations and performance capabilities as a Component Supplementary
Protector
C-SERIES TABLE A: COMPONENT SUPPLEMENTARY PROTECTORS
VOLTAGE
CIRCUIT
CONFIGURATION
SERIES
CURRENT RATING
FREQUENCY
PHASE
FULL LOAD
AMPS
32
DC
---
0.02 - 100
---
---
48
DC
---
110 - 150
---
---
65
DC
---
0.02 - 70
---
80
DC
---
80
DC
---
125
DC
125 / 250
250
NOTES
UL
CSA
5000
TC1, OL1, U2
TC1, OL1, U2
5000
TC1, OL1, U2
TC1, OL1, U2
---
5000
TC1,2, OL1,U1
TC1,2, OL1,U1
---
71 -100
---
5000
TC1,2, OL0,U1
TC1,2, OL0,U1
0.02 - 70
---
---
7500
TC1,2, OL1,U1
TC1,2, OL1,U1
---
71 -100
---
7500
TC1,2, OL0,U1
TC1,2, OL0,U1
0.02 - 70
---
---
10,000
TC1,2, OL1,U1
TC1,2, OL1,U1
Must Have Agency Code "L"
---
71 -100
---
10,000
TC1,2, OL0,U1
TC1,2, OL0,U1
Must Have Agency Code "L"
---
0.02 - 50
---
5000
TC1,2,OL1,U1
TC1,2,OL1,U1
DC
---
0.02 - 50
---
5000
TC1,2,OL1,U1
TC1,2,OL1,U1
Must Have Agency Code "L"
DC
---
0.02 - 50
---
5000
TC1,2,OL1,U1
TC1,2,OL1,U1
Must Have Agency Code "L". 2 Pole Break Required for 250 Volts
0.02 - 100
---
---
3000
TC1, OL1, U2
TC1, OL1, U2
Per Pole Rating
0.02 - 100
---
---
5000
TC1,2,OL1,U1
TC1,2,OL1,U1
Must Have Agency Code "L"
Must Have Agency Code "L"
50 / 60
1
150
DC
---
---
80 - 100
---
5000
TC1, OL0, U3
---
Must Have Agency Code "L"
150
DC
---
---
101 - 175
---
5000
TC1, OL0, U3
---
Must Have Agency Code "L" Parallel Pole
0.02 - 100
---
---
3500
TC1, OL1, U2
TC1, OL1, U2
125 / 250
50 / 60
1
0.02 - 50
---
---
3000
TC1,2,OL1,U1
TC1,2,OL1,U1
51 - 100
---
---
1000
TC1,2,OL1,U1
TC1,2,OL1,U1
2 or 3 poles breaking single phase
0.02 - 100
---
---
5000
TC1,2,OL1,U2
TC1,2,OL1,U2
2 or 3 poles breaking single phase, "L" Agency Code
0.02 - 50
---
---
3500
TC1, OL1, U2
TC1, OL1, U2
Per Pole Rating
0.02 - 100
---
---
5000
TC1,2,OL1,U1
TC1,2,OL1,U1
Must Have Agency Code "L"
51 - 70
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
---
0.02 - 100
---
3000
TC1, OL0, U2
TC1, OL0, U2
0.02 - 70
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
3 poles breaking 3 phase
---
0.02 - 90
---
5000
TC1,2,OL0,U1
TC1,2,OL0,U1
Must Have Agency Code "L"
0.02 - 50
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
0.02 - 30
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
---
31 - 50
5000
---
TC1,2,OL0,C1
TC1,2,OL0,C1
50 / 60
3
277
50 / 60
1
480 / 277
50 / 60
3
480
50 / 60
1
0.02 - 30
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
---
31 - 50
5000
---
TC1,2,OL0,C1
TC1,2,OL0,C1
TC1,2, OL1,U1
2 or 3 poles breaking single phase
3 poles breaking 3 phase
2 poles breaking 1 phase
80
DC
---
0.02 - 50
---
---
7500
TC1,2, OL1,U1
125
50 / 60
1
0.02 - 50
---
---
3000
TC1, OL1, U2
TC1, OL1, U2
Per Pole Rating
125 / 250
50 / 60
1
0.02 - 50
---
---
3500
TC1, OL1, U2
TC1, OL1, U2
2 or 3 poles breaking single phase
0.02 - 50
---
---
3000
TC1,2,OL1,U1
TC1,2,OL1,U1
2 or 3 poles breaking single phase
0.02 - 50
---
---
3500
TC1, OL1, U2
TC1, OL1, U2
250
50 / 60
0.02 - 50
---
---
3000
TC1, OL0, U2
TC1, OL0, U2
0.02 - 50
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
DUAL COIL
SWITCH ONLY
APPLICATION CODES
125
250
RELAY
UL/CSA
WITH BACKUP WITHOUT BACKUP
GENERAL
PURPOSE AMPS
FUSE
FUSE 1
MAX.
RATING
1
SHUNT
SHORT CIRCUIT CAPACITY (AMPS)
1
3
277
50 / 60
1
0.02 - 50
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
80
DC
---
0.02 - 50
---
---
7500
TC1,2, OL1,U1
TC1,2, OL1,U1
Per Pole Rating
3 poles breaking 3 phase
277
50 / 60
1
0.02 - 50
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
250
50 / 60
3
0.02 - 50
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
3 poles breaking 3 phase
480 / 277
50 / 60
3
0.02 - 30
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
3 poles breaking 3 phase
TC1,2,OL0,C1
480
50 / 60
1
---
31 - 50
5000
---
TC1,2,OL0,C1
0.02 - 30
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
---
31 - 50
5000
---
TC1,2,OL0,C1
TC1,2,OL0,C1
TC1,2, OL1,U1
80
DC
---
0.02 - 50
---
---
7500
TC1,2, OL1,U1
277
50 / 60
1
0.02 - 50
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
250
50 / 60
3
0.02 - 50
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
65
DC
---
0.02 - 70
---
---
---
---
---
80
DC
---
125
50 / 60
125 / 250
50 / 60
250
50 / 60
277
50 / 60
480 / 277
50 / 60
---
71 -100
---
---
---
---
0.02 - 70
---
---
---
---
---
---
71 -100
---
---
---
---
1
0.02 - 100
---
---
---
---
---
1
0.02 - 100
---
---
---
---
---
1
0.02 - 100
---
---
---
---
---
3
0.02 - 70
---
---
---
---
---
1
0.02 - 50
---
---
---
---
---
0.02 - 30
---
---
---
---
---
---
31 - 50
---
---
---
---
3
2 poles breaking 1 phase
3 poles breaking 3 phase
2 or 3 poles breaking single phase
3 poles breaking 3 phase
Notes:
1.
Requires branch circuit backup with a UL LISTED Type K5 or RK5 fuse rated 15A minimum and no more than 4 times full load amps not to exceed 125A for 50 Amp or less
rating and not to exceed 175 for 51 through 100 Amp rating
www.carlingtech.com
15
C-Series Circuit Breaker - General Specifications
Electrical Tables
Table B: Lists UL Recognized and CSA Accepted configurations and performance capabilities as a Manual Motor Controller.
RELAY
Notes:
1
UL recognized and CSA Accepted at 480V refers to 3 & 4 pole versions used in a 3Ø, wye connected circuit or 2-pole version connected with 2 poles breaking. 1Ø and backed up with series fusing as stated above in note 1.
*
Series, Shunt and Relay Trip - Voltage Coil Construction not current coils
Table C: Lists UL Recognized, CSA Accepted, VDE and TUV Certified configurations and performance capabilities as a
Component Supplementary Protector.
Notes:
1.
General Purpose ratings for UL/CSA only.
2.
Requires branch circuit backup with a UL LISTED Type K5 or RK5 fuse rated 15A minimum and no more than 4 times full load amps not to exceed 125A for 50 Amp or less
rating and not to exceed 175 for 51 through 100 Amp rating.
Table D: Lists UL Listed (489), CSA Certified (C22.2 No. 5.1-M) configuration and performance capabilities as a Molded Case
Circuit Breaker.
C SERIES TABLE D : UL489 LISTED BRANCH CIRCUIT BREAKERS
CIRCUIT
CONFIGURATION
SERIES
DUAL COIL
INTERRUPTING
CAPACITY
(AMPS)
WITHOUT
FULL LOAD
BACKUP FUSE
AMPS
CURRENT
RATING
VOLTAGE
CONSTRUCTION NOTES
MAX.
RATING
FREQUENCY
PHASE
80
DC
---
0.10 - 100
125
DC
---
0.10 - 100
5,000
1 - 3 Poles
125 / 250
DC
---
0.10 - 50
5,000
1 or 2 Poles (2 Poles Required for 250 Volts)
120
50 / 60
1
0.10 - 50
10,000
1 - 3 Poles
51 - 70
5,000
1 - 3 Poles
0.10 - 50
5,000
2 or 3 Poles. 1 Pole of a 3 Pole Unit is Neutral
50,000 1
Limited to 2 Poles Max from 71 - 100 Amps.
10,000
Limited to 2 Poles Max from 71 - 100 Amps.
120 / 240
50 / 60
1
0.10 - 50
10000 1
2 or 3 Poles. 1 Pole of a 3 Pole Unit is Neutral
240
50 / 60
1
0.10 - 30
5,000
1Pole
240
50 / 60
1
0.10 - 20
5,000
2 Pole
277
50 / 60
1
0.10 - 20
10,000
1Pole
120
50 / 60
1
0.10 - 30
10,000
---
Notes from Table D:
1.
Special catalog number required. Consult factory.
16
www.carlingtech.com
C-Series Circuit Breaker - General Specifications
Electrical Tables
Table E: Lists UL Recognized, CSA Accepted configurations and performance capabilities as Protectors, Supplementary for
Marine Electrical and Fuel Systems (Guide PEQZ2, File E75596). Ignition Protected per UL 1500. UL Classified Small Craft
Electrical Devices, Marine in accordance with ISO 8846 (Guide UZMK, File MQ1515) as Marine Supplementary Protectors.
Table F: Lists UL Listed configurations and performance capabilities as Circuit Breakers for use in Communications Equipment
(Guide DITT, File E189195), under UL489A.
Agency Certifications
UL Recognized
UL Standard 1077
Component Recognition Program as Protectors Supplementary (Guide CCN/QVNU2, File E75596)
CSA Accepted
Component Supplementary Protector under Class 3215 30, FIle 047848 0 000 CSA Standard C22.2 No. 235
UL Standard 508
Switches, Industrial Control
(Guide CCN/NRNT2, File E148683)
CSA Certified
UL Standard 1500
Protectors, Supplementary for Marine Electrical & Fuel Systems (Guide PEQZ2, File E75596) Ignition Protection
Circuit Breaker Model Case
(Class 1432 01, File 093910),
CSA Standard C22.2 No. 5.1 - M
TUV Certified
EN60934, under License No. R72040875
Circuit Breakers, Molded Case,
(Guide DIVQ, File E129899)
VDE Certified
EN60934, VDE 0642 under File
No. 10537
UL Listed
UL Standard 489
UL Standard 489A
www.carlingtech.com
Communications Equipment
(Guide CCN/DITT, File E189195)
17
C-Series Circuit Breaker - Handle UL Recognized – Ordering Scheme
C A 3
1
Series
2
Actuator
B 0
4
Circuit
3
Poles
10
5
Aux/Alarm
Switch
6
Frequency
& Delay
1 SERIES
C
9
Actuator
Color
C
10
Mounting
Bezel/Barrier
11
Agency
Approval
CODEAMPERES
Handle, one per pole
Handle, one per multipole unit
Mid-Trip Handle, one per pole
Mid-Trip Handle, one per pole & Alarm Switch
3 POLES 2
1
One
2
Two
1 2 1
8
Terminal
7 CURRENT RATING (AMPERES)
2 ACTUATOR 1
A
B
S
T
450
7
Current Rating
3
4
Three
Four
4 CIRCUIT 3
A 3 Switch Only (No Coil)
B
Series Trip (Current)
C
Series Trip (Voltage)
4
D
Shunt Trip (Current)
4
E
Shunt Trip (Voltage)
5
6
Five
Six
F 4 Relay Trip (Current)
G 4 Relay Trip (Voltage)
H 4,5 Dual Coil with Shunt Trip Voltage Coil
K 4,5 Dual Coil with Relay Trip Voltage Coil
0200.020
2350.350
4303.000
0250.025
2400.400
4353.500
0300.030
2450.450
4404.000
0350.035
2500.500
4454.500
0400.040
2550.550
4505.000
0450.045
2600.600
4555.500
0500.050
2650.650
4606.000
0550.055
2700.700
4656.500
0600.060
2750.750
4707.000
0650.065
2800.800
4757.500
0700.070
2850.850
4808.000
0750.075
2900.900
4858.500
0800.080
2950.950
4909.000
0850.085
4101.000
4959.500
0900.090
5121.250
610 10.000
0950.095
4151.500
71010.500
2100.100
517 1.750
611 11.000
2150.150
4202.000
71111.500
2200.200
5222.250
61212.000
2250.250
4252.500
71212.500
2300.300
5272.750
61313.000
OR VOLTAGE COIL (NORMAL RATED VOLTAGE) 7
61414.000
61515.000
61616.000
61717.000
61818.000
62020.000
62222.000
62424.000
62525.000
63030.000
635 35.000
640 40.000
65050.000
660 960.000
670 970.000
680 980.000
685 985.000
690 990.000
695 995.000
810 9100.00
A06 6 DC
A12 12 DC
A18 18 DC
A24 24 DC
J65 65 AC
K20 120 AC
L40 240 AC
CODEAMPERES
5 AUXILIARY / ALARM SWITCH
0
without Aux Switch
2
S.P.D.T., 0.110 Q.C. Term.
3
S.P.D.T., 0.139 Solder Lug
4
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
6 FREQUENCY & DELAY
03 3 DC 50/60Hz, Switch Only
10 7 DC Instantaneous
11
DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
20 7 50/60Hz Instantaneous
21 50/60Hz Ultra Short
22 50/60Hz Short
24 50/60Hz Medium
26 50/60Hz Long
6
8
9
30
31
32
34
36
42 8
44 8
46 8
52 8
54 8
56
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
DC 50/60Hz Instantaneous
DC 50/60Hz Ultra Short
DC 50/60Hz Short
DC 50/60Hz Medium
DC 50/60Hz Long
50/60Hz Short, Hi-Inrush
50/60Hz Medium, Hi-Inrush
50/60Hz Long, Hi-Inrush
DC Short, Hi-Inrush
DC Medium, Hi-Inrush
DC Long, Hi-Inrush
Notes:
1 Actuator Code:
A: Handle tie pin spacer(s) and retainers provided assembled with multi-pole units.
B: Handle location as viewed from front of breaker:
2 pole - left pole 3 pole - center pole 4 pole - two handles at center poles
5 pole - three handles at center poles
6 pole - four handles at center poles
S: Handle moves to mid-position only upon electrical trip of the breaker. Available with circuit codes B, C, D, E, F, G, H and K.
T: Handle moves to mid-position and alarm switch activates only upon electrical trip of the breaker. Available with circuit codes B & C.
2 Standard multipole units have all poles identical except when specifying auxiliary switch and/or mixed poles. 4 pole max with VDE. 5th pole available as Series Trip with Voltage Coil only.
3 Switch Only circuits, rated up to 50 amps and 6 poles, and only available with VDE Certification when tied to a protected pole (Circuit Code B, C, D or H.). For .02 to 30 amps, select Current Code 630. For 35 - 50 amps, select Current Code 650. For 55-70 amps, select Current Code 670. For 75-100 amps, select Current Code 810.
4 Circuit Codes D,E,F,G,H & K available with Terminal Codes 1,2,4 & 5 only. Circuit Codes D, F, H & K available up to 50 amps maximum Current Rating.
5 Consult factory for available Dual Coil options, as special catalog number is
required. Dual Coil Voltage Coils with Shunt Trip Construction trip instantaneously on line voltage. Dual Coil Voltage Coils require 30VA minimum power to trip
instantaneously and are rated for intermittent duty only.
6 Auxiliary Switch available with Series Trip and Switch Only circuits. On multi-pole breakers, one auxiliary switch is supplied, mounted in the extreme right pole.
7 Voltage coils not rated for continuous duty. Available only with delay codes 10 & 20.
8 Available with Circuit Codes B & D only, and up to 50 amps maximum.
9 Current Ratings 60 - 70 are available up to four poles maximum. Ratings 71 - 100 are available up to two poles maximum.
10 Terminal Code 1 available to 60 amps maximum.
11 Terminal Codes 2, 4, 5 and C available to 50 amps maximum.
12 Terminal Codes 3, 6 & 9 available to 100 amps maximum.
13 Terminal Code 7 available to 25 amps maximum.
14 Terminal Code A available to 100 amps maximum.
15 Terminal Codes 7, 9 & C are not VDE approved.
16 No marking available. Consult factory. VDE/TUV Approval requires dual
(I-O, ON-OFF) or I-O markings on all handles.
17 Single pole only.
18 VDE/TUV: 30 amps max.; UL/CSA: 50 amps max.; Available in 2 - 4 poles only and limited to AC Delays. “General Purpose amps” not rated for “full load amps” or to be used in applications with a motor.
18
A32 32 DC
A48 48 DC
A65 65 DC
J06
6 AC
8 TERMINAL 15
1 10 Stud 10-32
2 11 Screw 10-32
3 12 Stud 1/4-20
4 11 Stud M5 x 0.8
5 11 Screw M5 x 0.8
J12
J18
J24
J48
6 12
7 13,15
9 15
A 14
C 11,15
12 AC
18 AC
24 AC
48 AC
Stud M6
0.250 Double Click Connect
7/16” Clip Terminal
Plug-In Stud
5/16” Clip Terminal
9 ACTUATOR COLOR & LEGEND 16
Actuator Color
I-O
ON-OFF
Dual
Legend Color
White
AB 1Black
Black
CD 2White
Red
FG 3White
Green
HJ 4White
Blue
KL 5White
Yellow
MN 6Black
Gray
PQ 7Black
Orange
RS 8Black
Black (short handle)17 TU 9
White
10 MOUNTING / BARRIERS
MOUNTING STYLE
BARRIERS Threaded Insert
1
6-32 x 0.195 inches no A
6-32 X 0.195 inches yes 18
C 6-32 X 0.195 inches yes 2
ISO M3 x 5mm no B
ISO M3 x 5mm yes D 18 ISO M3 x 5mm yes Front panel Snap-In, 1.00” [25.4mm] wide bezel
17
E
with Handleguard no VOLTAGE
< 300
< 300
≥ 300
< 300
< 300
≥ 300
< 300
11 AGENCY APPROVAL
C UL Recognized, CSA Accepted
D VDE Certified, UL Recognized, CSA Accepted
E
TUV Certified, UL Recognized, CSA Accepted
H UL489 Construction: VDE Certified, UL Recognized, CSA Accepted
I
UL Recognized STD 1077, UL Recognized 1500 (ignition protected), CSA Accepted
L
UL489 Construction: UL Recognized, CSA Accepted
R UL489 Construction: TUV Certified, UL Recognized, CSA Accepted
www.carlingtech.com
C-Series Circuit Breaker - Handle UL489 Listed – Ordering Scheme
C A 3
1
Series
2
Actuator
B 0
4
Circuit
3
Poles
14
5
Aux/Alarm
Switch
6
Frequency
& Delay
1 SERIES
C
7
Current Rating
1 2 1
8
Terminal
9
Actuator
Color
10
Mounting/
Barriers
K G
11
Max. App.
Rating
12
Agency
Approval
7 CURRENT RATING (AMPERES)
CODEAMPERES
2 ACTUATOR 1
A
Handle, one per pole
B
Handle, one per multipole unit
S
Mid-Trip Handle, one per pole
T
Mid-Trip Handle, one per pole & Alarm Switch
3 POLES 2
1
One
450
2
Two
3
Three
4 CIRCUIT
B
Series Trip (Current)
5 AUXILIARY / ALARM SWITCH 3
0
without Aux Switch
2
S.P.D.T., 0.110 Q.C. Term.
3
S.P.D.T., 0.139 Solder Lug
4
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
6 FREQUENCY & DELAY
11
DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
21 50/60Hz Ultra Short
22 50/60Hz Short
24 50/60Hz Medium
6
8
9
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
26
42 4
44 4
46 4
52 4
54 4
56 4
50/60Hz Long
50/60Hz Short, Hi-Inrush
50/60Hz Medium, Hi-Inrush
50/60Hz Long, Hi-Inrush
DC Short, Hi-Inrush
DC Medium, Hi-Inrush
DC Long, Hi-Inrush
Notes:
1 Actuator Code:
A: Handle tie pin spacer(s) and retainers provided assembled with multi-pole units.
B: Handle located, as viewed from front of breaker in left pole. 2 pole maximum.
S: Handle moves to mid-position only upon electrical trip of the breaker.
T: Handle moves to mid-position and alarm switch activates only upon electrical trip of the breaker.
2 Standard multipole units have all poles identical except when specifying auxiliary switch and/or mixed poles.
2 & 3 pole circuit breakers required for 120/240 VAC (Maximum application rating code C) applications, have all poles identical except when specifying auxiliary / alarm switch which is normally supplied in extreme right pole per figure B. Terminal barriers are required on all multipole breakers.
Third pole is for 120/240 VAC applications requiring neutral disconnect. The 3rd pole has the same construction as poles 1 & 2.
3 On multi-pole breakers, one auxiliary. switch is supplied, mounted in the extreme right pole.
VDE approval on auxiliary switch codes 2, 3 & 4 only.
Auxiliary / Alarm Switch with Independent Circuit ie: separate from breaker circuit, only available with circuit breakers rated 50 amp maximum at 80 VDC, 125 VDC,
and 120 VAC. Auxiliary / Alarm Switch with Dependent Circuit ie: same as circuit breaker, is supplied from factory with common terminal of auxiliary / alarm switch connected to line terminal on 120/240 and 240 VAC ratings. Circuit breakers rated 120 VAC 50 amp maximum can be supplied with Auxiliary/Alarm switch common terminal connected to breaker line terminal. Consult factory for special catalog number.
4 Available up to 50 amps maximum.
5 Current ratings 71 - 100 with VDE approvals are available up to two poles maximum.
6 Terminal Codes 9 & C are not VDE approved.
7 Terminal Code 1 available to 60 amps maximum.
8 Terminal Codes 2, 4, 5 & C available to 50 amps maximum.
9 Terminal Codes 3, 6 & 9 available to 100 amps maximum.
10 Terminal Code A available to 100 amps maximum.
11 VDE and TUV approvals require Dual (I-O, ON-OFF) markings on all handles.
12 Barriers supplied on multi-pole units only.
www.carlingtech.com
2100.100
2150.150
2200.200
2250.250
2300.300
2350.350
2400.400
2450.450
2500.500
2550.550
2600.600
2650.650
2700.700
2750.750
2800.800
2850.850
2900.900
2950.950
4101.000
5121.250
4151.500
517 1.750
4202.000
5222.250
4252.500
5272.750
4303.000
4353.500
4404.000
4454.500
4505.000
4555.500
4606.000
4656.500
8 TERMINAL 6
1 7 Stud 10-32
2 8 Screw 10-32
3 9 Stud 1/4-20
4 8 Stud M5 x 0.8
5 8 Screw M5 x 0.8
4707.000
4757.500
4808.000
4858.500
4909.000
4959.500
610 10.000
71010.500
611 11.000
71111.500
61212.000
71212.500
61313.000
61414.000
61515.000
61616.000
61717.000
6 9
9 9
A 10
C 8
61818.000
62020.000
62222.000
62424.000
62525.000
63030.000
635 35.000
640 40.000
66060.000
67070.000
68080.000
68585.000
69090.000
69595.000
810100.00
Stud M6
7/16” Clip Terminal
Plug-In Stud
5/16” Clip Terminal
9 ACTUATOR COLOR & LEGEND 11
Actuator Color
ON-OFF Dual
Legend Color
White
B1Black
Black
D2White
Red
G3White
Green
J4White
Blue
L5White
Yellow
N6Black
Gray
Q7Black
Orange
S8Black
10 MOUNTING / BARRIERS
MOUNTING STYLE
Threaded Insert
1
6-32 x 0.195 inches
2
ISO M3 x 5mm
BARRIERS 12
yes
yes
11 MAXIMUM APPLICATION RATING
A
65 DC
B
125 DC
C
120/240 AC 2
D
240 AC
K
120 AC
F
277 AC
M
80 DC
12 AGENCY APPROVAL 11
A
without approvals
F
UL489 Listed, CSA Certified & VDE Certified
G
UL489 Listed & CSA Certified
J
UL489 Listed, CSA Certified & TUV Certified
19
C-Series Circuit Breaker - Sealed Toggle UL Recognized – Ordering Scheme
C M 3
1
Series
2
Actuator
B 0
4
Circuit
3
Poles
5
Aux/Alarm
Switch
10
6
Frequency
& Delay
Sealed Toggle, one per pole
2
Two
3
Three
4 CIRCUIT
A 2 Switch Only (no coil)
B
Series Trip (current)
C
Series Trip (voltage)
D 3 Shunt Trip (current)
E 3 Shunt Trip (voltage)
F 3
G 3
H 3,4
K 3,4
Relay Trip (current)
Relay Trip (voltage)
Dual Coil with Shunt Trip
Voltage Coil
Dual Coil with Relay Trip
Voltage Coil
5 AUXILIARY / ALARM SWITCH
0
without Aux Switch
2
S.P.D.T., 0.110 Q.C. Term.
3
S.P.D.T., 0.139 Solder Lug
4
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
6
8
9
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
6 FREQUENCY & DELAY
03 2 DC 50/60Hz, Switch Only
10 6 DC Instantaneous
11
DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
20 6 50/60Hz Instantaneous
21 50/60Hz Ultra Short
22 50/60Hz Short
24 50/60Hz Medium
26 50/60Hz Long
30
31
32
34
36
42 7
44 7
46 7
52 7
54 7
56
DC 50/60Hz Instantaneous
DC 50/60Hz Ultra Short
DC 50/60Hz Short
DC 50/60Hz Medium
DC 50/60Hz Long
50/60Hz Short, Hi-Inrush
50/60Hz Medium, Hi-Inrush
50/60Hz Long, Hi-Inrush
DC Short, Hi-Inrush
DC Medium, Hi-Inrush
DC Long, Hi-Inrush
Notes:
1 Actuator Code M: Handle location as viewed from front of breaker:
2 pole - right pole
3 pole - center pole
2 Switch Only circuits, rated up to 50 amps and 3 poles, and only available with VDE. For .02 to 30 amps, select Current Code 630. For 35 - 50 amps, select Current Code 650. For 55-70 amps, select Current Code 670. For 75-100 amps, select Current Code 810.
3 Circuit Codes D,E,F,G,H & K available with Terminal Codes 1,2,4 & 5 only.
4 Consult factory for available Dual Coil options, as special catalog number is
required. Dual Coil Voltage Coils with Shunt Trip Construction trip instantaneously on line voltage. Dual Coil Voltage Coils require 30VA minimum power to trip instantaneously and are rated for intermittent duty only.
5 Auxiliary Switch available with Series Trip and Switch Only circuits. On multi-pole breakers, one auxiliary switch is supplied, mounted in the extreme right pole.
6 Voltage coils not rated for continuous duty. Available only with delay codes 10 & 20.
7 Available with Circuit Codes B & D only, and up to 50 amps maximum.
8 Consult factory for current ratings 71-100, in three pole units, available as special
catalog number only.
9 Terminal Code 1 available to 60 amps maximum.
10 Terminal Codes 2, 4, 5 and C available to 50 amps maximum.
11 Terminal Codes 3, 6 & 9 available to 100 amps maximum.
12 Terminal Code 7 available to 25 amps maximum.
13 Terminal Code A available to 100 amps maximum.
20
9
Legend
Plate
C
10
Mounting
Bezel/Barrier
11
Agency
Approval
CODEAMPERES
2 ACTUATOR 1
3 POLES
1
One
1 0 1
8
Terminal
7 CURRENT RATING (AMPERES) 9
1 SERIES
C
M
450
7
Current Rating
0200.020
2350.350
4303.000
0250.025
2400.400
4353.500
0300.030
2450.450
4404.000
0350.035
2500.500
4454.500
0400.040
2550.550
4505.000
0450.045
2600.600
4555.500
0500.050
2650.650
4606.000
0550.055
2700.700
4656.500
0600.060
2750.750
4707.000
0650.065
2800.800
4757.500
0700.070
2850.850
4808.000
0750.075
2900.900
4858.500
0800.080
2950.950
4909.000
0850.085
4101.000
4959.500
0900.090
5121.250
610 10.000
0950.095
4151.500
71010.500
2100.100
517 1.750
611 11.000
2150.150
4202.000
71111.500
2200.200
5222.250
61212.000
2250.250
4252.500
71212.500
2300.300
5272.750
61313.000
OR VOLTAGE COIL (NORMAL RATED VOLTAGE) 7
61414.000
61515.000
61616.000
61717.000
61818.000
62020.000
62222.000
62424.000
62525.000
63030.000
635 35.000
640 40.000
65050.000
660 960.000
670 970.000
680 980.000
685 985.000
690 990.000
695 995.000
810 9100.00
A06 6 DC
A12 12 DC
A18 18 DC
A24 24 DC
J65 65 AC
K20 120 AC
L40 240 AC
CODEAMPERES
A32 32 DC
A48 48 DC
A65 65 DC
J06
6 AC
8 TERMINAL
1 9
Stud 10-32
2 10 Screw 10-32
11
3 Stud 1/4-20
4 10 Stud M5 x 0.8
5 10 Screw M5 x 0.8
J12
J18
J24
J48
6 11
7 12
9 11
A 13
C 10
12 AC
18 AC
24 AC
48 AC
Stud M6
0.250 Double Click Connect
7/16” Clip Terminal
Plug-In Stud
5/16” Clip Terminal
9 LEGEND PLATE
0
No Legend
10 MOUNTING / BARRIERS
MOUNTING STYLE 1
Standard Hex Nut A
Standard Hex Nut (multi-pole units only) BARRIERS
no
yes
11 AGENCY APPROVAL
C
UL Recognized & CSA Accepted
I
UL Recognized & CSA Accepted, UL1500 ignition protection
L
UL Recognized & CSA Accepted with listed construction
www.carlingtech.com
C-Series Circuit Breaker - Rocker UL Recognized – Ordering Scheme
C C 3
1
Series
2
Actuator
14
B 0
4
Circuit
3
Poles
5
Aux/Alarm
Switch
450
6
Frequency
& Delay
1 SERIES
C
9
Actuator
Color
10
Mounting/
Barriers
D
11
Agency
Approval
CODEAMPERES
2
Two
3
4 CIRCUIT
F 4
A 3 Switch Only (No Coil)
G 4
B
Series Trip (Current)
H 4,5
C
Series Trip (Voltage)
4
D
Shunt Trip (Current)
K 4,5
E 4 Shunt Trip (Voltage)
5 AUXILIARY / ALARM SWITCH 6
0
without Aux Switch
2
S.P.D.T., 0.110 Q.C. Term.
3
S.P.D.T., 0.139 Solder Lug
4
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
6 FREQUENCY & DELAY
03 DC 50/60Hz, Switch Only
10 7 DC Instantaneous
11 DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
20 7 50/60Hz Instantaneous
21 50/60Hz Ultra Short
22 50/60Hz Short
24 50/60Hz Medium
26 50/60Hz Long
6
8
9
Three
Relay Trip (Current)
Relay Trip (Voltage)
Dual Coil with Shunt Trip
Voltage Coil
Dual Coil with Relay Trip
Voltage Coil
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
30
31
32
34
36
42 8
44 8
46 8
52 8
54 8
56 8
DC 50/60Hz Instantaneous
DC 50/60Hz Ultra Short
DC 50/60Hz Short
DC 50/60Hz Medium
DC 50/60Hz Long
50/60Hz Short, Hi-Inrush
50/60Hz Medium, Hi-Inrush
50/60Hz Long, Hi-Inrush
DC Short, Hi-Inrush
DC Medium, Hi-Inrush
DC Long, Hi-Inrush
Notes:
1 Push-To-Reset actuators have OFF portion of rocker shrouded.
2 Multi-pole breakers have all poles identical except when specifying Auxiliary switch and/or mixed poles, and have one rocker per breaker. Rocker location as viewed from front panel: 2 pole – left pole; 3 pole – center pole.
3 Switch Only circuits, rated up to 50 amps and 3 poles, and only available with VDE Certification when tied to a protected pole (Circuit Code B, C, D or H.), For .02 to 30 amps, select Current Code 630. For 35 - 50 amps, select Current Code 650. For 55-70 amps, select Current Code 670. For 75-100 amps, select Current Code 810.
4 Circuit Codes D,E,F,G,H & K available with Terminal Codes 1,2,4 & 5 only. Circuit Codes D,F,H & K available up to 50 amps maximum Current Rating.
5 Consult factory for available Dual Coil options, as special catalog number is required. Dual Coil Voltage Coils with Shunt Trip Construction trip instantaneously on line voltage. Dual Coil Voltage Coils require 30VA minimum power to trip instantaneously and are rated for intermittent duty only.
6 Auxiliary Switch available with Series Trip and Switch Only circuits. On multi-pole breakers, one auxiliary switch is supplied, mounted in the extreme right pole. Auxiliary switch codes 2, 3 & 4 are VDE approved.
7 Voltage coils not rated for continuous duty. Available only with delay codes 10 & 20.
8 Available with Circuit Codes B & D only, and up to 50 amps maximum.
9 Current Ratings 60-70 are available up to four poles maximum. Ratings 71-100 are available up to two poles maximum.
10 Terminal Code 1 available to 60 amps maximum.
11 Terminal Codes 2,4,5 & C available to 50 amps maximum.
12 Terminal Codes 3,6 & 9 available to 100 amps maximum.
13 Terminal Code 7 available to 25 amps maximum.
14 Terminal Code A available to 100 amps maximum.
15 Terminal Codes 7, 9 & C are not VDE approved.
16 Color shown is visi and legend with remainder of rocker black
17 Legend on Push-to-reset bezel/shroud is white when single color rocker is ordered. Dual = ON-OFF/I-O legend with actuator codes C - G, and J, K, N, O, R, & U. None = no legend with actuator codes H, L, P, V. Rockerguard available with actuator codes C - L. Push-to-reset available with actuator codes N, O, P, R, U, V.
18 VDE/TUV approval requires Dual (I-O, ON-OFF) or I-O markings on rocker.
19 VDE/TUV: 30 amps max.; UL/CSA: 50 amps max.; Available in 2 - 4 poles only and limited to AC Delays. “General Purpose amps” not rated for “full load amps” or to be used in applications with a motor.
www.carlingtech.com
0200.020
2350.350
4303.000
0250.025
2400.400
4353.500
0300.030
2450.450
4404.000
0350.035
2500.500
4454.500
0400.040
2550.550
4505.000
0450.045
2600.600
4555.500
0500.050
2650.650
4606.000
0550.055
2700.700
4656.500
0600.060
2750.750
4707.000
0650.065
2800.800
4757.500
0700.070
2850.850
4808.000
0750.075
2900.900
4858.500
0800.080
2950.950
4909.000
0850.085
4101.000
4959.500
0900.090
5121.250
610 10.000
0950.095
4151.500
71010.500
2100.100
517 1.750
611 11.000
2150.150
4202.000
71111.500
2200.200
5222.250
61212.000
2250.250
4252.500
71212.500
2300.300
5272.750
61313.000
OR VOLTAGE COIL (NORMAL RATED VOLTAGE) 7
61414.000
61515.000
61616.000
61717.000
61818.000
62020.000
62222.000
62424.000
62525.000
63030.000
635 35.000
640 40.000
65050.000
660 960.000
670 970.000
680 980.000
685 985.000
690 990.000
695 995.000
810 9100.00
A06 6 DC
A12 12 DC
A18 18 DC
A24 24 DC
J65 65 AC
K20 120 AC
L40 240 AC
CODEAMPERES
3 POLES 2
One
8
Terminal
7 CURRENT RATING (AMPERES)
2 ACTUATOR 1
Two Color Visi-Rocker
C
Indicate ON, vertical legend
D
Indicate ON, horizontal legend
E
Indicate ON, no legend
F
Indicate OFF, vertical legend
G
Indicate OFF, horizontal legend
H
Indicate OFF, no legend
Push-To-Reset, Visi-Rocker
N
Indicate OFF,vertical legend
O
Indicate OFF,horizontal legend
P
Indicate OFF,no legend
Single color
J
Vertical legend
K
Horizontal legend
L
No legend
Push-To-Reset, Single color
R
Vertical legend
U
Horizontal legend
V
No legend
1
1 2 1
7
Current Rating
A32 32 DC
A48 48 DC
A65 65 DC
J06
6 AC
8 TERMINAL
1 10 Stud 10-32
2 11 Screw 10-32
3 12 Stud 1/4-20
4 11 Stud M5 x 0.8
5 11 Screw M5 x 0.8
J12
J18
J24
J48
12 AC
18 AC
24 AC
48 AC
6 12 Stud M6
7 13 0.250 Double Quick Connect
9
7/16” Clip Terminal
A 14 Plug-In Stud
C
5/16” Clip Terminal
9 ACTUATOR COLOR & LEGEND 16,17,18
Actuator or
Visi-Color Marking:
Marking Color:
Single Color
Color: I-O ON-OFF Dual/None Rocker/Handle Visi-Rocker
White A B
1
Black White
Black C D
2
White n/a
Red F G
3 White Red
Green H J
4 White Green
Blue K L
5 White Blue
Yellow M N 6
Black Yellow
Gray P Q
7
Black Gray
Orange R S
8
Black Orange
10 MOUNTING / BARRIERS 1
STANDARD ROCKER BEZEL
1
6-32 x 0.195 inches
2
6-32 x 0.195 inches
3 19 6-32 x 0.195 inches
4
ISO M3 x 5mm
5
ISO M3 x 5mm
6 19 ISO M3 x 5mm
ROCKERGUARD BEZEL
A
6-32 x 0.195 inches
C
6-32 x 0.195 inches
E 19 6-32 x 0.195 inches
G
ISO M3 x 5mm
J
ISO M3 x 5mm
L 19 ISO M3 x 5mm
PUSH-TO-RESET BEZEL
B
6-32 x 0.195 inches
D
6-32 x 0.195 inches
19
F
6-32 x 0.195 inches
H
ISO M3 x 5mm
J
ISO M3 x 5mm
19
M
ISO M3 x 5mm
BARRIERSVOLTAGE
no
<300
yes
<300
yes
≥300
no
<300
yes
<300
yes
≥300
no
yes
yes
no
yes
yes
<300
<300
≥300
<300
<300
≥300
no
yes
yes
no
yes
yes
<300
<300
≥300
<300
<300
≥300
11 AGENCY APPROVAL
C
UL Recognized & CSA Accepted
D VDE Certified, UL Recognized & CSA Accepted
E TUV Certified, UL Recognized & CSA Accepted
H UL489 Construction: VDE Certified, UL Recognized & CSA Accepted
I
UL Recognized STD 1077, UL Recognized 1500 (ignition protected),
& CSA Accepted
L UL489 Construction: UL Recognized & CSA Accepted
R
UL489 Construction: TUV Certified, UL Recognized & CSA Accepted
21
C-Series Circuit Breaker - Rocker UL Listed – Ordering Scheme
C C 3
1
Series
2
Actuator
B 0
4
Circuit
3
Poles
14
5
Aux/Alarm
Switch
6
Frequency
& Delay
450
7
Current Rating
Two Color Visi-Rocker
C Indicate ON, vertical legend
D Indicate ON, horizontal legend
F Indicate OFF, vertical legend
G Indicate OFF, horizontal legend
2100.100
2150.150
2200.200
2250.250
2300.300
2350.350
2400.400
2450.450
2500.500
2550.550
2600.600
2650.650
2700.700
2750.750
2800.800
2850.850
2900.900
Single color
J Vertical legend
K Horizontal legend
ROCKER STYLE DESCRIPTIONS
INDICATE "ON"
VERTICAL
STYLE
INDICATE "OFF"
SINGLE COLOR
CODE "F"
CODE "J"
CODE "C"
INDICATE
COLOR
LOCATION
HORIZONTAL
STYLE
K G
10
Mounting/
Barriers
11
Max. App.
Rating
12
Agency
Approval
CODEAMPERES
2 ACTUATOR 1
LINE
LINE
CODE "G"
CODE "K"
LINE
2
8 TERMINAL
1 5 Stud 10-32
2 6 Screw 10-32 with saddle
& washer clamps
3 7 Stud 1/4-20
4 6 Stud M5 x 0.8
5 6 Screw M5 x 0.8 with saddle
& washer clamps
LINE
Two
3
4707.000
4757.500
4808.000
4858.500
4909.000
4959.500
610 10.000
71010.500
611 11.000
71111.500
61212.000
71212.500
61313.000
61414.000
61515.000
61616.000
61717.000
61818.000
62020.000
62222.000
62424.000
62525.000
63030.000
635 35.000
640 40.000
65050.000
660 60.000
670 70.000
680 80.000
685 85.000
690 90.000
695 95.000
810 100.00
5 AUXILIARY / ALARM SWITCH 2
0
without Aux Switch
2
S.P.D.T., 0.110 Q.C. Term.
3
S.P.D.T., 0.139 Solder Lug
4
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
6
8
9
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
42 8
44 8
46 8
52 8
54 8
56
6 7
9 7,8
A 7,8
C 6,8
Stud M6
7/16” Clip Terminal
Plug-In Stud
5/16” Clip Terminal
Three
4 CIRCUIT
B
Series Trip (current)
6 FREQUENCY & DELAY
11 DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
21 50/60Hz Ultra Short
22 50/60Hz Short
24 50/60Hz Medium
26 50/60Hz Long
2950.950
4101.000
5121.250
4151.500
517 1.750
4202.000
5222.250
4252.500
5272.750
4303.000
4353.500
4404.000
4454.500
4505.000
4555.500
4606.000
4656.500
LINE
CODE "D"
3 POLES 1
1
One
50/60Hz Short, Hi-Inrush
50/60Hz Medium, Hi-Inrush
50/60Hz Long, Hi-Inrush
DC Short, Hi-Inrush
DC Medium, Hi-Inrush
DC Long, Hi-Inrush
Notes:
1 Multi-pole breakers have all breakers identical except when specifying Auxiliary switch and/or mixed poles, and have one rocker per breaker.
2 On multi-pole breakers, one auxiliary switch is supplied, mounted in the extreme right pole.
3 Available up to 50 amps maximum.
4 Current ratings 71 - 100 with VDE approvals are available up to two poles maximum.
5 Terminal Code 1 available to 60 amps maximum.
6 Terminal Codes 2, 4, 5 & C available to 50 amps maximum.
7 Terminal Codes 3, 6, 9 & A available to 100 amps maximum.
8 Terminal Codes 9 & C are not VDE approved.
9 Color shown is visi and legend with remainder of rocker black
10 Dual = ON-OFF/I-O legend on actuator.
11 VDE and TUV approval requires Dual (I-O, ON-OFF) markings on rocker.
12 Rockerguard available with all actuator codes.
13 Barriers supplied on multi-pole units only.
14 2 & 3 pole circuit breakers required for 120/240 AC rating.
22
9
Actuator
Color
7 CURRENT RATING (AMPERES) 4
1 SERIES
C
LINE
1 2 A
8
Terminal
9 ACTUATOR COLOR & LEGEND 11
Actuator or
Visi-Color Marking:
Marking Color:
Single Color
10
Color: ON-OFF Dual Rocker/Handle White B
1
Black Black D
2
White Red G
3
White Green J
4
White Blue L
5
White Yellow N
6
Black Gray Q7 Black Orange S
8
Black 10 MOUNTING / BARRIERS 12
Standard Rocker Bezel Threaded Insert, 2 per pole
A
6-32 X 0.195 inches C
ISO M3 x 5mm Rockerguard Bezel
Threaded Insert, 2 per pole
B
6-32 x 0.195 inches D
ISO M3 x 5mm Visi-Rocker
White
n/a
Red
Green
Blue
Yellow
Gray
Orange
BARRIERS 13
yes
yes
yes
yes
11 MAXIMUM APPLICATION RATING
A
65 DC
B
125 DC
C
120/240 AC 14
D
240 AC
F
277 AC
K
120 AC
M
80 DC
12 AGENCY APPROVAL
A
without approvals
F
UL 489 Listed, CSA Certified, & VDE Certified
G
UL 489 Listed & CSA Certified
J
UL489 Listed, CSA Certified & TUV Certified
www.carlingtech.com
C-Series Circuit Breaker - Flat Rocker UL Recognized – Ordering Scheme
C 1 2
1
Series
2
Actuator
B 0
4
Circuit
3
Poles
5
Aux/Alarm
Switch
10
450
6
Frequency
& Delay
7
Current Rating
9
Actuator
Color
10
Mounting/
Barriers
E
11
Agency
Approval
7 CURRENT RATING (AMPERES) 9
1 SERIES
C
CODEAMPERES
2 ACTUATOR 1
Two Color Visi-Rocker
1 Indicate OFF,
vertical legend
2 Indicate OFF,
horizontal legend
Single color
3 Vertical legend
4 Horizontal legend
Push-To-Reset, Visi-Rocker
5 Indicate OFF,
vertical legend
6 Indicate OFF,
horizontal legend
Push-To-Reset , Single color
7 Vertical legend
8 Horizontal legend
3 POLES 2
1
One
1 2 1
8
Terminal
2
Two
3
4 CIRCUIT
F 4
A 3 Switch Only (No Coil)
G 4
B
Series Trip (Current)
H 4,5
C
Series Trip (Voltage)
D 4 Shunt Trip (Current)
K 4,5
E 4 Shunt Trip (Voltage)
5 AUXILIARY / ALARM SWITCH 6
0
without Aux Switch
2
S.P.D.T., 0.110 Q.C. Term.
3
S.P.D.T., 0.139 Solder Lug
4
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
6 FREQUENCY & DELAY
03 DC 50/60Hz, Switch Only
10 7 DC Instantaneous
11 DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
20 7 50/60Hz Instantaneous
21 50/60Hz Ultra Short
22 50/60Hz Short
24 50/60Hz Medium
26 50/60Hz Long
6
8
9
Relay Trip (Current)
Relay Trip (Voltage)
Dual Coil with Shunt Trip
Voltage Coil
Dual Coil with Relay Trip
Voltage Coil
30
31
32
34
36
42 8
44 8
46 8
52 8
54 8
56 8
DC 50/60Hz Instantaneous
DC 50/60Hz Ultra Short
DC 50/60Hz Short
DC 50/60Hz Medium
DC 50/60Hz Long
50/60Hz Short, Hi-Inrush
50/60Hz Medium, Hi-Inrush
50/60Hz Long, Hi-Inrush
DC Short, Hi-Inrush
DC Medium, Hi-Inrush
DC Long, Hi-Inrush
Notes:
1 Push-to-reset actuators have OFF portion of rocker shrouded.
2 Multi-pole breakers have all poles identical except when specifying Auxiliary switch and/or mixed poles, and have one rocker per breaker. Rocker location as viewed from front panel: 2 pole – left pole; 3 pole – center pole.
3 Switch Only circuits, rated up to 50 amps and 3 poles, and only available with VDE Certification when tied to a protected pole (Circuit Code B, C, D or H.). For .02 to 30 amps, select Current Code 630. For 35 - 50 amps, select Current Code 650. For 55-70 amps, select Current Code 670. For 75-100 amps, select Current Code 810.
4 Circuit Codes D,E,F,G,H & K available with Terminal Codes 1,2,4 & 5 only. Circuit Codes D,F,H & K available up to 50 amps maximum Current Rating.
5 Consult factory for available Dual Coil options, as special catalog number is required. Dual Coil Voltage Coils with Shunt Trip Construction trip instantaneously on line voltage. Dual Coil Voltage Coils require 30VA minimum power to trip instantaneously and are rated for intermittent duty only.
6 Auxiliary Switch available with Series Trip and Switch Only circuits. On multi-pole breakers, one auxiliary switch is supplied, mounted in the extreme right pole. Auxilary switch codes 2, 3 & 4 are VDE approved.
7 Voltage coils not rated for continuous duty. Available only with delay codes 10 and 20.
8 Available with Circuit Codes B & D only, and up to 50 amps maximum.
9 Current ratings 60-70 are available up to four poles maximum. Current ratings 71 - 100 are available up to two poles maximum.
10 Terminal Code 1 available to 60 amps maximum.
11 Terminal Codes 2,4,5 & C available to 50 amps maximum.
12 Terminal Codes 3,6 & 9 available to 100 amps maximum.
13 Terminal Code 7 available to 25 amps maximum.
14 Terminal Code A available to 100 amps maximum.
15 Terminal Codes 7, 9 & C are not VDE approved.
16 Color shown is visi & legend with remainder of rocker black. Dual = ON-OFF/I-O legend.
17 Legend on Push-to-reset bezel/shroud is white with single color actuator codes 7 & 8. Legend on Push-to-reset bezel/shroud matches visi-color of rocker with actuator codes 5 & 6.
18 VDE/TUV approval requires Dual (I-O, ON-OFF) or I-O markings on rocker.
19 VDE/TUV: 30 amps max.; UL/CSA: 50 amps max.; Available in 2 & 3 poles only and limited to AC Delays. “General Purpose amps” not rated for “full load amps” or to be used in applications with a motor.
20 Recessed “OFF SIDE” available with actuator codes 1,2,3&4. Legends on rocker are available in ink stamping only.
www.carlingtech.com
61414.000
61515.000
61616.000
61717.000
61818.000
62020.000
62222.000
62424.000
62525.000
63030.000
635 35.000
640 40.000
65050.000
660 960.000
670 970.000
680 980.000
685 985.000
690 990.000
695 995.000
810 9100.00
A06 6 DC
A12 12 DC
A18 18 DC
A24 24 DC
J65 65 AC
K20 120 AC
L40 240 AC
CODEAMPERES
Three
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
0200.020
2350.350
4303.000
0250.025
2400.400
4353.500
0300.030
2450.450
4404.000
0350.035
2500.500
4454.500
0400.040
2550.550
4505.000
0450.045
2600.600
4555.500
0500.050
2650.650
4606.000
0550.055
2700.700
4656.500
0600.060
2750.750
4707.000
0650.065
2800.800
4757.500
0700.070
2850.850
4808.000
0750.075
2900.900
4858.500
0800.080
2950.950
4909.000
0850.085
4101.000
4959.500
0900.090
5121.250
610 10.000
0950.095
4151.500
71010.500
2100.100
517 1.750
611 11.000
2150.150
4202.000
71111.500
2200.200
5222.250
61212.000
2250.250
4252.500
71212.500
2300.300
5272.750
61313.000
OR VOLTAGE COIL (NORMAL RATED VOLTAGE) 7
A32 32 DC
A48 48 DC
A65 65 DC
J06
6 AC
8 TERMINAL
1 10 Stud 10-32
2 11 Screw 10-32
3 12 Stud 1/4-20
4 11 Stud M5 x 0.8
5 11 Screw M5 x 0.8
J12
J18
J24
J48
6 12
7 13
9 15
A 14
C 15
12 AC
18 AC
24 AC
48 AC
Stud M6
0.250 Double Quick Connect
7/16” Clip Terminal
Plug-In Stud
5/16” Clip Terminal
9 ACTUATOR COLOR & LEGEND 16,17,18
Actuator or
Visi-Color Marking:
Marking Color:
Single Color
Color: I-O ON-OFF Dual/None Rocker/Handle Visi-Rocker
White A B
1
Black White
Black C D
2
White n/a
Red F G
3 White Red
Green H J
4 White Green
Blue K L
5 White Blue
Yellow M N 6
Black Yellow
Gray P Q
7
Black Gray
Orange R S
8
Black Orange
10 MOUNTING / BARRIERS 1
STANDARD ROCKER BEZEL
1
6-32 x 0.195 inches
2
6-32 x 0.195 inches
19
3
6-32 x 0.195 inches
4
ISO M3 x 5mm
5
ISO M3 x 5mm
19
6
ISO M3 x 5mm
RECESSED OFF ROCKER
7
6-32 x 0.195 inches 8
6-32 x 0.195 inches 9
6-32 x 0.195 inches A
ISO M3 x 5mm C
ISO M3 x 5mm E
ISO M3 x 5mm PUSH-TO-RESET BEZEL
B
6-32 x 0.195 inches
D
6-32 x 0.195 inches
F 19 6-32 x 0.195 inches
H
ISO M3 x 5mm
J
ISO M3 x 5mm
M 19 ISO M3 x 5mm
BARRIERSVOLTAGE
no
<300
yes
<300
yes
≥300
no
<300
yes
<300
yes
≥300
no yes yes no yes yes <300
<300
≥300
<300
<300
≥300
no
yes
yes
no
yes
yes
<300
<300
≥300
<300
<300
≥300
11 AGENCY APPROVAL
C
UL Recognized & CSA Accepted
E TUV Certified, UL Recognized & CSA Accepted
I
UL Recognized STD 1077, UL Recognized 1500 (ignition protected),
& CSA Accepted
L UL489 Construction: UL Recognized & CSA Accepted
R
UL489 Construction: TUV Certified, UL Recognized & CSA Accepted
23
C-Series Circuit Breaker - Flat Rocker UL Listed – Ordering Scheme
C 1 2
1
Series
2
Actuator
B 0
4
Circuit
3
Poles
14
5
Aux/Alarm
Switch
6
Frequency
& Delay
450
7
Current Rating
1 2 A
8
Terminal
9
Actuator
Color
2100.100
2150.150
2200.200
2250.250
2300.300
2350.350
2400.400
2450.450
2500.500
2550.550
2600.600
2650.650
2700.700
2750.750
2800.800
2850.850
2900.900
Push-To-Reset, Visi-Rocker
5 Indicate OFF, vertical legend
6 Indicate OFF, horizontal legend
Push-To-Reset , Single color
7 Vertical legend
8 Horizontal legend
2950.950
4101.000
5121.250
4151.500
517 1.750
4202.000
5222.250
4252.500
5272.750
4303.000
4353.500
4404.000
4454.500
4505.000
4555.500
4606.000
4656.500
4707.000
4757.500
4808.000
4858.500
4909.000
4959.500
610 10.000
71010.500
611 11.000
71111.500
61212.000
71212.500
61313.000
61414.000
61515.000
61616.000
61717.000
8 TERMINAL
1 7 Stud 10-32
2 8 Screw 10-32
3 9 Stud 1/4-20
4 8 Stud M5 x 0.8
5 8 Screw M5 x 0.8
2
Two
3
Three
4 CIRCUIT
B
Series Trip (current)
5 AUXILIARY / ALARM SWITCH 2
0
without Aux Switch
2
S.P.D.T., 0.110 Q.C. Term.
3
S.P.D.T., 0.139 Solder Lug
4
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
6
8
9
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
42 4 50/60Hz Short, Hi-Inrush
44 4 50/60Hz Medium, Hi-Inrush
46 4 50/60Hz Long, Hi-Inrush
52 4 DC Short, Hi-Inrush
54 4 DC Medium, Hi-Inrush
56 4 DC Long, Hi-Inrush
1 Notes:
2 Push-to-reset actuators have OFF portion of rocker shrouded.
3 Multi-pole breakers have all breakers identical except when specifying Auxiliary switch and/or mixed poles, and have one rocker per breaker.
4 On multi-pole breakers, one auxiliary switch is supplied, mounted in the extreme right pole.
5 Available up to 50 amps maximum.
6 Current ratings 71 - 100 with VDE approvals are available up to two poles maximum.
7 Terminal Code 1 available to 60 amps maximum.
8 Terminal Codes 2, 4, 5 & C available to 50 amps maximum.
9 Terminal Codes 3, 6, 9 & A available to 100 amps maximum.
10 Terminal Codes 9 & C are not VDE approved.
11 Color shown is visi and legend with remainder of rocker black
12 Dual = ON-OFF/I-O legend on actuator.
13 VDE and TUV approval requires Dual (I-O, ON-OFF) markings on rocker.
14 Legend on push-to-reset bezel/shroud is white when single color rocker is ordered. Legend on push-to-reset bezel/shroud matches visi-color of rocker with actuator codes
15 5 & 6.
16 Recessed “OFF-SIDE” available with actuator codes 1, 2, 3, & 4. Legends on rocker are available in ink stamping only.
17 Barriers supplied on multi-pole units only.
18 2 & 3 pole circuit breakers required for 120/240 AC rating.
24
12
Agency
Approval
CODEAMPERES
2 ACTUATOR 1
Two Color Visi-Rocker
1 Indicate OFF, vertical legend
2 Indicate OFF, horizontal legend
Single color
3 Vertical legend
4 Horizontal legend
6 FREQUENCY & DELAY
11 DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
21 50/60Hz Ultra Short
22 50/60Hz Short
24 50/60Hz Medium
26 50/60Hz Long
11
Max. App.
Rating
7 CURRENT RATING (AMPERES) 5
1 SERIES
C
3 POLES 2
1
One
K G
10
Mounting/
Barriers
6 9
9 9,10
A 9
C 8,10
Stud M6
7/16” Clip Terminal
Plug-In Stud
5/16” Clip Terminal
9 ACTUATOR COLOR & LEGEND 12
Actuator or
Visi-Color Marking:
Marking Color:
Single Color
11
Color: ON-OFF Dual Rocker/Handle White B
1
Black Black D
2
White Red G
3
White Green J
4
White Blue L
5
White Yellow N
6
Black Gray Q7 Black Orange S
8
Black 10 MOUNTING / BARRIERS 12
STANDARD ROCKER BEZEL Threaded Insert, 2 per pole
A
6-32 X 0.195 inches C
ISO M3 x 5mm RECESSED OFF ROCKER 14
Threaded Insert, 2 per pole
E
6-32 x 0.195 inches F
ISO M3 x 5mm PUSH-TO-RESET BEZEL 13
Threaded Insert, 2 per pole
B
6-32 x 0.195 inches D
ISO M3 x 5mm 61818.000
62020.000
62222.000
62424.000
62525.000
63030.000
635 35.000
640 40.000
65050.000
660 60.000
670 70.000
680 80.000
685 85.000
690 90.000
695 95.000
810 100.00
Visi-Rocker
White
n/a
Red
Green
Blue
Yellow
Gray
Orange
BARRIERS 15
yes
yes
yes
yes
yes
yes
11 MAXIMUM APPLICATION RATING
A
65 DC
B
125 DC
C
120/240 AC 16
D
240 AC
F
277 AC
K
120 AC
M
80 DC
12 AGENCY APPROVAL
A
without approvals
G
UL 489 Listed & CSA Certified
J
UL489 Listed, CSA Certified & TUV Certified
www.carlingtech.com
C-Series Circuit Breaker - Handle – Circuit & Terminal Diagrams
Circuit & Terminal Diagrams: in. [mm]
.960 [24.38]
.311 DIA [Ø7.90]
.558 [14.17]
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
3 Available on Series Trip and Switch Only Circuits when called for on multi-pole units. Only one auxiliary switch is normally supplied, as viewed in mulit-pole identification scheme.
www.carlingtech.com
25
C-Series Circuit Breaker - Handle – Circuit & Terminal Diagrams
Circuit & Terminal Diagrams: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
3 Schematic shown represents current trip circuits.
4 Available only as special catalog number.
26
www.carlingtech.com
C-Series Circuit Breaker - Handle – Dimensional Specifications
Dimensional Specifications: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
www.carlingtech.com
27
C-Series Circuit Breaker - Handleguard – Dimensional Specifications
Dimensional Specifications: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
28
www.carlingtech.com
C-Series Circuit Breaker - Arc Chute Barrier UL Recognized/Listed – Dimensional Specifications
Dimensional Specifications: in. [mm]
Notes:
1 Only 1-pole and 3-pole configurations shown. Arc chute (without barrier) and arc chute barrier also available for 2-pole construction.
2 Dimensions apply to all variations shown.
3 Notice that line and load terminal orientation for indicate on and indicate off rocker circuit breakers are opposite.
4 Screw type terminals shown for Rocker style (CF1, C11, etc) circuit breakers. For other terminal configurations see circuit and terminal diagrams.
5 All dimensions are in inches [millimeters].
6 Tolerance ± .020 unless otherwise specified.
7 Must be ordered under a special catalog number.
www.carlingtech.com
29
C-Series Circuit Breaker - Sealed Toggle – Dimensional Specifications
Dimensional Specifications: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
30
www.carlingtech.com
C-Series Circuit Breaker - Rocker – Circuit & Terminal Diagrams
Circuit & Terminal Diagrams: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
3 Schematic shown represents current trip circuit.
www.carlingtech.com
31
C-Series Circuit Breaker - Rocker – Dimensional Specifications
Dimensional Specifications: in. [mm]
Notes:
1 Dimensions apply to all variations shown. Notice that circuit breaker line and load terminal orientation on indicate OFF is opposite of indicate ON.
2 For pole orientation with horizontal legend, rotate front view clockwise 90°.
3 All dimensions are in inches [millimeters].
4 Tolerance ±.020 [.51] unless otherwise specified.
32
www.carlingtech.com
C-Series Circuit Breaker - Flat Rocker – Dimensional Specifications
Dimensional Specifications: in. [mm]
Notes:
1 For pole orientation with horizontal legend, rotate front view clockwise 90°.
2 All dimensions are in inches [millimeters].
3 Tolerance ±.020 [.51] unless otherwise specified.
www.carlingtech.com
33
E-Series
E-Series Circuit Breaker - Introduction
E-Series
CIRCUIT BREAKER
The E-Series hydraulic-magnetic circuit breaker is ideally suited for higher current and voltage applications. It is
UL listed and CSA certified for branch circuit protection, which does not require a fuse back up. It is also UL
recognized and CSA certified as a supplementary protector and as a manual motor controller.
Its physical features include front and back mounting, screw and stud terminals and heavy duty box wire
connectors for solid wire or a pressure plate connector for standard wire. The E-series is available with handle
actuators and can be configured as .1-125 amps, up to 600VAC or 125VDC, with choice of time delays, actuator
colors and 1 to 6 poles configuration. Additionally, a Power Selector device is also available.
Product Highlights:
UL listed and CSA certified
Certified for circuit branch protection
ŠŠ Recognized as a supplementary protector
and as a manual motor controller
ŠŠ Optional power selector device
ŠŠ
ŠŠ
34
www.carlingtech.com
E-Series Circuit Breaker - General Specifications
Electrical
Maximum Voltage
600VAC 50/60 Hz, 125VDC (See Table A)
Current Ratings
Standard current coils: 0.100, 0.250, 0.500, 1.00, 2.50, 5.00, 7.50, 10.0, 15.0, 20.0, 25.0, 30.0, 50.0, 60.0, 70.0 & 100 Amp.
Auxiliary Switch Rating SPDT; 10.1A 250VAC, 1.0A 65VDC; 0.5A 80VDC, 0.1A 125VAC
(with gold contacts).
Insulation Resistance
Minimum of 100 Megohms at 500 VDC.
Dielectric Strength
UL, CSA: 2200 V 50/60 Hz for one minute between all electrically isolated terminals. E-Series Circuit Breakers comply with the 8mm spacing and 3750V 50/60 Hz dielectric requirements from hazardous voltage to operator accessible surfaces, between adjacent poles and from main circuits to auxiliary circuits per Publications EN 60950 and VDE 0805.
Resistance, Impedance Values from Line to Load Terminal - based on Series Trip Circuit Breaker.
CURRENT
TOLERANCE
(AMPS)
(%)
0.10 - 5.0
5.1 - 20.0
± 15
± 25
20.1 - 50.0
± 35
Mechanical
Endurance
10,000 ON-OFF operations @ 6 per minute; with rated Current and Voltage.
Trip Free
All E-Series Circuit Breakers will trip on overload, even when Handle is forcibly held in the ON position.
Trip Indication
The operating Handle moves positively to the OFF position when an overload causes the breaker to trip.
Physical
Number of Poles
Mounting
Connectors, Box Type
Internal Circuit Configuration
Weight
Standard Colors
1-6
A 3” minimum spacing must be
provided between the circuit breaker arc venting area on back
connected E-Series circuit breakers and grounded obstructions. E-Series circuit breakers must be mounted on a vertical surface.
Front connected E-Series circuit breakers are supplied with box type pressure connectors that accept copper or aluminum conductors as follows: 1/0-14 Copper, 1/0-12 Aluminum.
Series and Switch Only, (with or
without auxiliary switch). Shunt with current coils.
Approximately 252 grams/pole (Approximately 9 ounces/pole)
Housing-Black; Actuator - See Ordering Scheme.
Environmental
Designed in accordance with requirements of specification
MIL PRF-55629 & MIL-STD-202G as follows:
Pulse Tolerance Curves
Time Delay Curves
62, 64 & 66
(100 Amps Max.)
Time Delay Curves
22, 24 & 26 (100 Amps Max.)
Shock
Withstands 100 Gs, 6ms, sawtooth while carrying rated current per Method 213, Test Condition “I”.
Vibration
Withstands 0.060” excursion from 10-55 Hz, and 10 Gs 55-500 Hz, at
rated current per Method 204C, Test Condition A.
Moisture Resistance
Method 106D, i.e., ten 24-hour cycles @ + 25°C to +65°C, 80-98% RH.
Salt Spray
Method 101, Condition A (90-95% RH @ 5% NaCl Solution, 96 hrs).
Thermal Shock
Method 107D, Condition A (Five cycles @ -55°C to +25°C to +85°C to +25°C).
Operating Temperature -40° C to +85° C
*Manufacturer reserves the right to change product specification without prior notice.
www.carlingtech.com
35
E-Series Circuit Breaker - General Specifications
Electrical Tables
Table A: Lists UL Listed (489) & CSA Certified (C22.2 No. 5) configurations & performance capabilities as a Molded Case
Circuit Breaker.
E SERIES TABLE A : UL489 LISTED BRANCH CIRCUIT BREAKERS
VOLTAGE
CIRCUIT
CONFIGURATION
SERIES
CURRENT RATING
MAX.
RATING
FREQUENCY
PHASE
FULL LOAD AMPS
INTERRUPTING
CAPACITY (AMPS)
HIGH
INTERRUPTING
CAPACITY
WITHOUT BACKUP
(AMPS)
FUSE
80
DC
---
0.10 - 100
5,000
50,000
125
DC
---
0.10 - 100
5,000
10,000
125
DC
---
0.10 - 125
10,000
---
120
50 / 60
1
0.10 - 125
10,000
---
240
240
50 / 60
50 / 60
1
1
0.10 - 30
31 - 100
5,000
5,000
10,000
120 / 240
50 / 60
1
0.10 - 30
5,000
10,000
120 / 240
50 / 60
1
31 - 100
5,000
---
120 / 240
50 / 60
1
101 - 125
10,000
---
240
50 / 60
3
0.10 - 100
5,000
---
Table B: Lists UL Recognized & CSA Accepted configurations & performance capabilities as a Component Supplementary
Protector.
E -SERIES TABLE B: COMPONENT SUPPLEMENTARY PROTECTORS
CURRENT RATING
SHORT CIRCUIT CAPACITY (AMPS)
UL/CSA
FULL LOAD
GENERAL
FREQUENCY
PHASE
WITH
BACKUP
WITHOUT
AMPS
PURPOSE AMPS
FUSE3
BACKUP FUSE
VOLTAGE
CIRCUIT
CONFIGURATION
MAX.
RATING
APPLICATION CODES
UL
CSA
125
DC
---
0.02 - 100
---
---
5,000
TC1,2, OL1, U1 TC1,2, OL1, U1
125
150
DC
DC
-----
-----
101 - 120
0.02 - 125
-----
5,000
5,000
TC1,2, OL0, U1 TC1,2, OL0, U1
TC1, OL0, U3 TC1, OL0, U3
160
150 / 300
DC
DC
-----
0.02 - 100
0.02 - 100
-----
-----
5,000
5,000
TC1,2, OL1, U1 TC1,2, OL1, U1
TC1,2, OL1, U1 TC1,2, OL1, U1
SERIES &
120 / 240
50 / 60
1
---
0.02 - 100
---
5,000
TC1,2, OL0, U1 TC1,2, OL0, U1
SHUNT
240
250
50 / 60
50 / 60
1
1
0.02 - 100
0.02 - 100
-----
--10,000
5,000
---
TC1,2, OL1, U1 TC1,2, OL1, U1
TC1,2, OL1, C1 TC1,2, OL1, C1
277
50 / 60
1
0.02 - 100
---
--10,000
5,000
---
TC1,2, OL1, U1 TC1,2, OL1, U1
TC1,2, OL1, C1 TC1,2, OL1, C1
480
50 / 60
50 / 60
50 / 60
1&3
1&3
1&3
0.02 - 100
0.02 - 50
0.02 - 100
-------
10,000
10,000
10,000
-------
TC1,2, OL1, C1 TC1,2, OL1, C1
TC1,2, OL1, C1 TC1,2, OL1, C1
TC1,2, OL1, C1 TC1,2, OL1, C1
DC
---
---
0.02 - 125
---
5,000
DC
---
0.02 - 120
160
DC
---
0.02 - 100
240
277
50 / 60
50 / 60
1
1
0.02 - 100
0.02 - 100
480
600
50 / 60
50 / 60
1&3
1&3
0.02 - 100
0.02 - 100
480 1
600
600 2
125
SWITCH
ONLY
TC1, OL0, U3
TC1, OL0, U3
Notes:
1 Per pole opposite polarity rating - Delta Configuration.
2 4 Poles connected in series
3 Requires branch circuit backup with a UL Listed Type K5 or RK5 fuse rated 15A minimum and no more than 4 times full load amp rating and not to exceed 225A.
36
www.carlingtech.com
E-Series Circuit Breaker - General Specifications
Electrical Tables
Table C: Lists UL Recognized, CSA Accepted and VDE Certified configurations and performance capabilities as a
Component Supplementary Protector.
E -SERIES TABLE C: COMPONENT SUPPLEMENTARY PROTECTORS WITH VDE
CURRENT RATING
VOLTAGE
CIRCUIT
CONFIGURATION
SHORT CIRCUIT CAPACITY (AMPS)
UL/CSA
MAX.
FREQUENCY PHASE FULL LOAD AMPS WITH BACKUP
RATING
FUSE1
125
DC
---
0.1 - 100
---
WITHOUT
BACKUP
FUSE
WITHOUT
BACKUP
FUSE
5,000
5,000
SERIES &
240
50 / 60
1&3
0.1 - 100
---
5,000
5,000
SHUNT
415
50 / 60
1&3
0.1 - 100
10,000
---
4,000
SWITCH ONLY
125
DC
---
0.1 - 125
240
50 / 60
1&3
0.1 - 100
415
50 / 60
1&3
0.1 - 100
APPLICATION CODES
VDE (Icn)
UL
CONSTRUCTION NOTES
CSA
TC1,2, OL1, U1 TC1,2, OL1, U1
1 or 2 Poles
1 - 5 Poles. Up to 4
TC1,2, OL1, U1 TC1,2, OL1, U1 Current Poles, 1 Voltage
Pole
2 - 5 Poles. Up to 4
TC1,2, OL1, C1 TC1,2, OL1, C1 Current Poles, 1 Voltage
Pole
Notes:
1 Requires branch circuit backup with a UL LISTED Type K5 or RK5 fuse rated 15A minimum and no more than 4 times full load amp rating and not to exceed 225 amps.
Table D: Lists UL Recognized, CSA Accepted configurations and performance capabilities as Protectors, Supplementary for
Marine Electrical and Fuel Systems (Guide PEQZ2, File E75596). Ignition Protected per UL 1500. UL Classified Small Craft
Electrical Devices, Marine in accordance with ISO 8846 (Guide UZMK, File MQ1515) as Marine Supplementary Protectors.
E SERIES TABLE D : UL1500 (Marine Ignition Protection)
VOLTAGE
CIRCUIT
CONFIGURATION
SERIES
MAX.
RATING
FREQUENCY
CURRENT RATING
SHORT CIRCUIT
CAPACITY (AMPS)
FULL LOAD AMPS
WITHOUT BACKUP
FUSE
UL
CSA
PHASE
APPLICATION CODES
65
DC
---
0.02 - 100
5,000
TC1,2,OL1,U1
TC1,2,OL1,U1
125
50 / 60
1
0.02 - 100
1,500
TC1,2,OL1,U1
TC1,2,OL1,U1
250
50 / 60
1
0.02 - 100
1,500
TC1,2,OL1,U1
TC1,2,OL1,U1
Agency Certifications
UL Recognized
UL Standard 1077
UL Standard 1500
UL Listed
UL Standard 489
www.carlingtech.com
Component Recognition Program
as Protectors, Supplementary
(Guide QVNU2, File E75596)
CSA Accepted
Component Supplementary
Protector (Class 3215 30, File
047848 0 000)
CSA Standard C22.2 No. 235
Component Recognition Program
as Manual Motor Controls (Guide
NLRV2, File E135367)
CSA Certified
Circuit Breaker Molded Case
(Class 1432 01, File 093910),
CSA Standard C22.2 No. 5.1 - M
Protectors, Supplementary for
Marine Electrical & Fuel Systems
(Guide PEQZ2, File E75596)
Ignition Protection
TUV Certified
EN60934 under License No.
R72031056
VDE Certified
EN60934, VDE 0642 under File
No. 10537
Circuit Breakers, Molded Case
(Guide DIVQ, File E129899)
37
E-Series Circuit Breaker - Handle UL Recognized – Ordering Scheme
E A 2
1
Series
2
Actuator
B 0
4
Circuit
3
Poles
5
Auxiliary
Switch
24
450
6
Frequency
& Delay
7
Current Rating
2 ACTUATOR
A
Handle, one per pole
3Three
4Four
4 CIRCUIT 2
A 3 Switch Only (no coil)
B
Series Trip (current)
C
Series Trip (voltage)
D
Shunt Trip (current)
6 FREQUENCY & DELAY
03 3 DC 50/60Hz, Switch Only 10 5 DC Instantaneous
12 DC Short
14 DC Medium
16 DC Long
20 5 50/60Hz Instantaneous
22 50/60Hz Short
24 50/60Hz Medium
26 50/60Hz Long
30 DC, 50/60Hz Instantaneous
32 DC, 50/60Hz Short
E
F
G
Shunt Trip (voltage)
Relay Trip (current)
Relay Trip (voltage)
S.P.S.T. 0.110 Q.C. Terminals
S.P.S.T. 0.110 Q.C. Terminals
(Gold Contacts)
S.P.S.T. 0.187 Q.C. Terminals
S.P.D.T. 0.187 Q.C. Terminals
34 DC, 50/60Hz Medium
36 DC, 50/60Hz Long
62 50/60Hz Short, Hi-Inrush
64 50/60Hz Medium, Hi-Inrush
66 50/60Hz Long, Hi-Inrush
72 DC, Short,Hi-Inrush
74 DC,Medium, Hi-Inrush
76 DC, Long, Hi-Inrush
92 6DC, 50/60Hz Short, Hi-Inrush
94 6DC, 50/60Hz Medium, Hi-Inrush
96 6DC, 50/60Hz Long, Hi-Inrush
0.350
0.400
0.450
0.500
0.550
0.600
0.650
0.700
0.750
0.800
0.850
0.900
0.950
1.000
1.250
1.500
1.750
2.000
2.250
2.500
2.750
430
435
440
445
450
455
460
465
470
475
480
485
490
495
610
710
611
711
612
712
613
3.000
3.500
4.000
4.500
5.000
5.500
6.000
6.500
7.000
7.500
8.000
8.500
9.000
9.500
10.000
10.500
11.000
11.500
12.000
12.500
13.000
OR VOLTAGE COIL (MIN. TRIP RATING, VOLTS) 5
A06 6 DC, 5 DC
A65 65 DC, 55 DC
J48
A12 12 DC, 10 DC
B25 125 DC, 100 DC J65
A18 18 DC, 15 DC
J06 6 AC, 5 AC
K20
A24 24 DC, 20 DC
J12 12 AC, 10 AC
L40
A32 32 DC, 25 DC
J18 18 AC, 15 AC
A48 48 DC, 40 DC
J24 24 AC, 20 AC
614
615
616
617
618
620
622
624
625
630
635
640
650
660
670
680
690
810
811
812
912 8
14.000
15.000
16.000
17.000
18.000
20.000
22.000
24.000
25.000
30.000
35.000
40.000
50.000
60.000
70.000
80.000
90.000
100.000
110.000
120.000
125.000
48 AC, 40 AC
65 AC, 55 AC
120 AC, 65 AC
240 AC, 130 AC
Notes:
1 VDE approval on 1-5 poles only. Standard multi-pole units identical poles except when specifying auxiliary switch - (see Note 4). For mixed ratings, consult factory.
2 Switch Only & Series Trip construction available with either front or back connected
terminals.
Shunt construction available with back connected terminals, (Terminal Codes 1 & 2) only. Circuit Codes B,C & D are VDE approved.
3 Switch Only construction: 30 amps or less select Current Rating Code 630; 31-70 amps, select Current Rating code 670; 71-100 amps, select Current Rating Code 810; 101-125 amps Select Current Rating Code 912. Switch Only is VDE approved only if tied to a protected pole.
38
11
Maximum
Application
Rating
12
Agency
Approval
MAX. RATING
50 A
120 A
50 A
100 A
Dual
Legend Color
1Black
2White
3White
4White
5White
6Black
7Black
8Black
10 MOUNTING / BARRIERS
BACK CONNECTED (FRONT MOUNTED ONLY)
Mounting Inserts
A6-32
B ISO M3
CODEAMPERES
235
240
245
250
255
260
265
270
275
280
285
290
295
410
512
415
517
420
522
425
527
10
Mounting/
Barriers
9 ACTUATOR COLOR & LEGEND 13
Actuator Color
I-O
ON-OFF
White
AB
Black
CD
Red
FG
Green
HJ
Blue
KL
Yellow
MN
Gray
PQ
Orange
RS
7 CURRENT RATING (AMPERES) 7
0.020
0.025
0.030
0.035
0.040
0.045
0.050
0.055
0.060
0.065
0.070
0.075
0.080
0.085
0.090
0.095
0.100
0.150
0.200
0.250
0.300
9
Actuator
Color
FRONT CONNECTED (BACK MOUNTED ONLY)
MAX. RATING
3 10 Box Wire Connector (Line & Load)
100 A
11
C Box Wire Connector with Pressure Plate (Line & Load)
100 A
4
10-32 Screw (Line & Load)
50 A
D
M5 Screw (Line & Load)
50 A
5
10-32 “Bus-Type” Screw (Line), 10-32 Screw (Load)
50 A
E
M5 “Bus-Type” Screw (Line), 10-32 Screw (Load)
50 A
6 10 10-32 “Bus-Type” Screw (Line), Box Wire Connector (Load) 100 A
F 11 10-32 “Bus-Type” Screw (Line), Box Wire Connector
with Pressure Plate (Load)
100 A
7
1/4-20 Screw (Line & Load)
100 A
G
M6 Screw (Line & Load)
100 A
8
1/4-20 “Bus-Type” Screw (Line), 1/4-20 Screw (Load)
100 A
H
M6 “Bus-Type” Screw (Line), M6 Screw (Load)
100 A
10
9 1/4-20 “Bus-Type” Screw (Line), Box Wire Connector (Load) 100 A
J 11 1/4-20 “Bus-Type” Screw (Line), Box Wire Connector
with Pressure Plate (Load)
100 A
5Five
6Six
5 AUXILIARY SWITCH 4
0 without Auxiliary Switch
6
2 S.P.D.T. 0.110 Q.C. Terminals
7
3 S.P.D.T. 0.139 Solder Lug
4 S.P.D.T. 0.110 Q.C. Terminals
8
(Gold Contacts)
9
020
025
030
035
040
045
050
055
060
065
070
075
080
085
090
090
210
215
220
225
230
8
Terminal
C B
8 TERMINAL 12
BACK CONNECTED (FRONT MOUNTED ONLY)
1 9 10-32 Stud (All Terminals)
2 9 1/4-20 Stud (All Terminals)
A 9 M5 Stud (Line & Load)
B 9 M6 Stud (Line & Load)
1 SERIES
E
3 POLES 1
1
One
2Two
1 2 A
FRONT CONNECTED (BACK MOUNTED ONLY) 14
Back Mounting Foot Type Front Mounting Inserts (Optional Use)
CShort
6-32
D Short
ISO M3
ELong
6-32
F
Long
ISO M3
11 MAXIMUM APPLICATION RATING 15
A
65 VDC, 120 A G 16
B
125 VDC, 120 A
H 16
C
120/240 VAC, 100 A
J 16
D
240 VAC, 100 A
L 16
E 16 277/480 VAC, 100 A
T
F
277 VAC, 100 A
W 16
600 VAC, 100 A
480 VAC, 100 A
415 VAC, 100 A
160 VDC, 100 A
125 VDC/240 VAC, 100 A
125 VDC/415 VAC, 100 A
12 AGENCY APPROVAL
B UL 1077 / UL508 Recognized & CSA Accepted
D UL 1077 Recognized, CSA Accepted, & VDE Certified
4
5
6
7
8
9
10
11
12
13
14
15
16
Auxiliary Switch available on Switch Only and Series Trip units. On multi-pole units, only one auxiliary switch is normally supplied mounted in the extreme right pole. Back mounted units require special mounting provisions when auxiliary switch is specified. VDE approval on Auxilary Switch Codes 0,2,3 & 4 only.
Voltage Trip Coils are not rated for continuous duty. Available only with Frequency & Delay Codes 10 & 20. Series Trip construction with a voltage coil s VDE approved only if tied to a protected pole.
Frequency & Delay Codes 92,94 & 96 are not VDE Certified.
Current Coil Ratings 0.100 - 100 ams are VDE Certified.
125 A rating (Code 912) available as a Switch Only (Circuit Code A), rated 125 VDC (Code B).
An Anti-Flash Over Barrier is supplied between poles on multi-pole units with 10-32 (Terminal Code 1). 1/4-20 (Code 2), M5 (Code A), and M6 (Code B) terminals per UL requirement.
Box Wire Connector will accept #14 through 0 AWG. copper wire or #12 through 0 AWG. aluminum wire.
Box Wire Connector with Pressure Plate for stranded wire, consult factory for details.
Terminal Codes A,B,D,E,G & H are not VDE Certified.
VDE approvals require Dual (I-O, ON-OFF) or I-O markings on all handles.
Back Mounted breakers can also be front mounted by utilizing the proper front panel mounting inserts normally supplied. However, terminal connections must be made prior to mounting.
Application ratings B,D,J,T & W are available with VDE.
415, 480 & 600 VAC ratings require 3 or 4 pole break 3Ø and 2 pole break 1Ø.
www.carlingtech.com
E-Series Circuit Breaker - Handle UL Listed – Ordering Scheme
E A 2
1
Series
2
Actuator
24
450
6
Frequency
& Delay
7
Current Rating
B 0
4
Circuit
3
Poles
5
Auxiliary
Switch
2 ACTUATOR
A
Handle, one per pole
3 POLES 1
1
One
2Two
3Three
4Four
5Five
6Six
4 CIRCUIT 2
B
Series Trip (current)
C 3 Series Trip (voltage)
5 AUXILIARY SWITCH 4
0 without Auxiliary Switch
6
2 S.P.D.T. 0.110 Q.C. Terminals
7
3 S.P.D.T. 0.139 Solder Lug
4 S.P.D.T. 0.110 Q.C. Terminals
8
(Gold Contacts)
9
S.P.S.T. 0.110 Q.C. Terminals
S.P.S.T. 0.110 Q.C. Terminals
(Gold Contacts)
S.P.S.T. 0.187 Q.C. Terminals
S.P.D.T. 0.187 Q.C. Terminals
6 FREQUENCY & DELAY
10 5 DC Instantaneous
62 50/60Hz Short, Hi-Inrush
12 DC Short
64 50/60Hz Medium, Hi-Inrush
14 DC Medium
66 50/60Hz Long, Hi-Inrush
16 DC Long
72 DC, Short,Hi-Inrush
20 5 50/60Hz Instantaneous
74 DC,Medium, Hi-Inrush
22 50/60Hz Short
76 DC, Long, Hi-Inrush
24 50/60Hz Medium
26 50/60Hz Long
7 CURRENT RATING (AMPERES) 7
CODEAMPERES
0.020
0.025
0.030
0.035
0.040
0.045
0.050
0.055
0.060
0.065
0.070
0.075
0.080
0.085
0.090
0.095
0.100
0.150
0.200
0.250
0.300
9
Actuator
Color
10
Mounting/
Barriers
8 TERMINAL 7
BACK CONNECTED (FRONT MOUNTED ONLY)
1 8 10-32 Stud (All Terminals)
2 8 1/4-20 Stud (All Terminals)
1 SERIES
E
020
025
030
035
040
045
050
055
060
065
070
075
080
085
090
090
210
215
220
225
230
1 2 A
8
Terminal
235
240
245
250
255
260
265
270
275
280
285
290
295
410
512
415
517
420
522
425
527
0.350
0.400
0.450
0.500
0.550
0.600
0.650
0.700
0.750
0.800
0.850
0.900
0.950
1.000
1.250
1.500
1.750
2.000
2.250
2.500
2.750
430
435
440
445
450
455
460
465
470
475
480
485
490
495
610
710
611
711
612
712
613
3.000
3.500
4.000
4.500
5.000
5.500
6.000
6.500
7.000
7.500
8.000
8.500
9.000
9.500
10.000
10.500
11.000
11.500
12.000
12.500
13.000
OR VOLTAGE COIL (MIN. TRIP RATING, VOLTS) 5
A06 6 DC, 5 DC
A65 65 DC, 55 DC
J48
A12 12 DC, 10 DC
B25 125 DC, 100 DC J65
A18 18 DC, 15 DC
J06 6 AC, 5 AC
K20
A24 24 DC, 20 DC
J12 12 AC, 10 AC
L40
A32 32 DC, 25 DC
J18 18 AC, 15 AC
A48 48 DC, 40 DC
J24 24 AC, 20 AC
www.carlingtech.com
614
615
616
617
618
620
622
624
625
630
635
640
650
660
670
680
690
810
811
812
912 8
14.000
15.000
16.000
17.000
18.000
20.000
22.000
24.000
25.000
30.000
35.000
40.000
50.000
60.000
70.000
80.000
90.000
100.000
110.000
120.000
125.000
48 AC, 40 AC
65 AC, 55 AC
120 AC, 65 AC
240 AC, 130 AC
C C
11
Maximum
Application
Rating
12
Agency
Approval
MAX. RATING
50 A
125 A
FRONT CONNECTED (BACK MOUNTED ONLY)
MAX. RATING
3 9 Box Wire Connector (Line & Load)
100 A
C 10 Box Wire Connector with Pressure Plate (Line & Load)
100 A
4
10-32 Screw (Line & Load)
50 A
5
10-32 “Bus-Type” Screw (Line), 10-32 Screw (Load)
50 A
6 9 10-32 “Bus-Type” Screw (Line), Box Wire Connector (Load) 100 A
F 10 10-32 “Bus-Type” Screw (Line), Box Wire Connector
with Pressure Plate (Load)
100 A
7
1/4-20 Screw (Line & Load)
125 A
8
1/4-20 “Bus-Type” Screw (Line), 1/4-20 Screw (Load)
100 A
9 9 1/4-20 “Bus-Type” Screw (Line), Box Wire Connector (Load) 100 A
J 10 1/4-20 “Bus-Type” Screw (Line), Box Wire Connector
with Pressure Plate (Load)
100 A
9 ACTUATOR COLOR & LEGEND 12
Actuator Color
ON-OFF Dual
Legend Color
White
B1Black
Black
D2White
Red
G3White
Green
J4White
Blue
L5White
Yellow
N6Black
Gray
Q7Black
Orange
S8Black
10 MOUNTING / BARRIERS
BACK CONNECTED (FRONT MOUNTED ONLY)
Mounting Inserts
A6-32
B ISO M3
FRONT CONNECTED (BACK MOUNTED ONLY) 11
Back Mounting Foot Type Front Mounting Inserts (Optional Use)
CShort
6-32
D Short
ISO M3
ELong
6-32
F
Long
ISO M3
11 MAXIMUM APPLICATION RATING 15
1
120 VAC
B
125 VDC, 120 A
13
C 120/240 VAC, 100 A
D
240 VAC, 100 A
12 AGENCY APPROVAL
C UL 489 Listed & CSA Certified
F UL 489 Listed, CSA Certified, & VDE Certified
Notes:
1 Standard multi-pole units identical poles except when specifying auxiliary switch (see Note 4). For mixed ratings, consult factory. VDE Certification on 1-5 poles only.
2 Series Trip construction available with either front or back connected terminals. 3 Series Trip construction with a voltage coil is not available as a single pole unit and must be tied to a protected pole.
4 On multi-pole units, only one auxiliary switch is normally supplied mounted in the extreme right pole per Figure A. Back mounted units require special mounting provisions when
auxiliary switch is specified. VDE Certification on auxilary switch codes 0, 2, 3 & 4 only.
5 Voltage Trip Coils are not rated for continuous duty. Available only with Frequency & Delay Codes 10 & 20.
6 Frequency & Delay Codes 92, 94 & 96 are not VDE Certified.
7 Current Ratings under 0.100 amps are not VDE Certified .
8 An Anti-Flash Over Barrier is supplied between poles on multi-pole units with 10-32 Stud (Terminal Code 1) or 1/4-20 Stud (Code 2) terminals per UL requirement.
9 Box Wire Connector will accept #14 through 0 AWG. copper wire or #12 through 0 AWG. aluminum wire.
10 Box Wire Connector with Pressure Plate for stranded wire, consult factory for details.
11 Back Mounted breakers can also be front mounted by utilizing the proper front panel mounting inserts normally supplied. However, terminal connections must be made prior to mounting.
12 VDE Certification requires dual (I-O , ON-OFF) markings on all handles.
13 Not available with VDE Certification.
39
E-Series Circuit Breaker - Handle – Circuit & Terminal Diagrams
Circuit & Terminal Diagrams: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
3 0-50 amps: 10-32 & M5 Studs .625±.062/15.88±1.574 long.
4 51-120 amps: 1/4-20 & M6 Studs .750±.062/19.05±1.574 long.
40
www.carlingtech.com
E-Series Circuit Breaker - Handle (Back Connected) – Dimensional Specifications
Dimensional Specifications: in. [mm]
Notes:
1 1/4 -20 stud terminal in Series Trip circuit configuration shown.
2 A 3” min spacing must be provided between the circuit breaker arc venting area of back connected E-Series circuit breaker and grounded obstructions.
3 All dimensions are in inches [millimeters].
4 Tolerance ±.020 [.51] unless otherwise specified.
5 Circuit breakers must be mounted on vertical surface.
www.carlingtech.com
41
E-Series Circuit Breaker - Handle (Front Connected) – Dimensional Specifications
Dimensional Specifications: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
3 Box wire connector terminal in Series Trip circuit configuration shown.
4 Circuit breakers must be mounted on vertical surface.
42
www.carlingtech.com
F-Series
F-Series Circuit Breaker - Introduction
F-Series
CIRCUIT BREAKER
The F-Series hydraulic-magnetic high amperage circuit breakers are designed to handle high current applications
in extremely hot and/or cold locations. Due to its time-proven hydraulic-magnetic design, the F-Series load
sensing mechanism is insensitive to changes in ambient or enclosure temperature, providing a consistent trip
point over temperatures ranging from -40°C to +85°C. Additionally, the F-Series circuit breakers come with a
choice of overload time delays, making them ideal for critical applications having inductive loads.
Further, the F-Series breakers are available up to 700A and an optional 25 millivolt metering shunt construction
provides a safe method for monitoring current flowing through the breaker by simply connecting a meter
with light gauge wire to the appropriate terminals located on the shunt housing at the rear of the breaker.
Applications can be customized by measuring and displaying percentage of current, watts or safe/danger zones.
Product Highlights:
AC ratings to UL 489
ŠŠ DC voltage ratings up to 700A with metering
shunt section
ŠŠ Consistent trip point over temperatures ranging
from -40°C to +85°C
ŠŠ Optional 25 millivolt metering shunt construction
ŠŠ
www.carlingtech.com
43
F-Series Circuit Breaker - General Specifications
Electrical
Maximum Voltage
125VDC, 277VAC
Current Ratings
Standard current coils: 100, 125, 150, 175, 225, 250 amps. 300, 350, 400, 500, 600, 700 amps
available as parallel pole construction.
Auxiliary Switch Rating SPDT; 10.1 Amps @ 250VAC, 1.0 Amps @ 65VDC, 0.5 Amps @ 80VDC 0.1 Amps @ 125VAC (with gold contacts).
Insulation Resistance
Minimum: 100 Megohms at 500 VDC
Dielectric Strength
1960 VAC, 50/60 Hz for one minute between all electrically isolated terminals, except 2500 VAC for one minute between alarm/aux. switch and main terminals with contacts in open
and closed position. F-Series circuit breakers comply with the 8mm spacing & 3750VAC 50/60 Hz dielectric requirements from hazardous voltage to operator accessible surfaces, between adjacent poles and from main circuits to auxilary circuits per Publications EN 60950 and VDE 0805.
Resistance, Impedance Values from Line to Load Terminal - based on Series Trip Circuit Breaker.
RESISTANCE PER POLE VALUES
from Line to Load Terminals
(Values Based on Series Trip Circuit Breaker)
CURRENT
TOLERANCE
(AMPS)
(%)
100 - 700
50
Mechanical
Endurance
4000 ON-OFF operations with rated
Current & Voltage & 4000 operations with no load (8000 operations total) @ 5 per minute. Parallel Pole construction: 1000 operations with rated Current and Voltage @ 5 per minute.
Trip Free
All F-Series Circuit Breakers will trip
on overload, even when the actuator is forcibly held in the ON position.
Trip Indication
The operating actuator moves positively to the OFF position when an overload causes the circuit breaker to trip.
Physical
Number of Poles
1 - 3 Poles Note: Ratings over 250 Amps only available with parallel pole.
Internal Circuit Config. Series (with or without auxiliary switch), Switch Only (with or without auxiliary switch).
Available Accessories Factory installed: DC Current Metering Shunt (25 mV @lr)
Weight
Varies depending on construction. Consult factory.
Standard Colors
Housing - Black; Actuator- Black or
White with contrasting ON-OFF legend.
Environmental
Designed and tested in accordance with requirements of
specification MIL-PRF-55629 & MIL-STD-202 as follows:
Shock
Withstands 100 Gs, 6ms, sawtooth while carrying rated current per Method 213, Test Condition “I”. Instantaneous and ultra-short curves tested @ 90% of rated current.
Vibration
Withstands 0.060” excursion from 10-55 Hz, and 10 Gs 55-500 Hz, at rated current per Method 204C, Test Condition A. Instantaneous and ultrashort curves tested at 90% of rated current.
Moisture Resistance
Method 106D; ten 24-hour cycles @
+ 25°C to +65°C, 80-98% RH.56 days @ +85°C, 85% RH.
Salt Spray
Method 101, Condition A (90-95% RH @ 5% NaCl Solution, 96 hrs).
Thermal Shock
Method 107D, Condition A (Five cycles @ -55°C to +25°C to +85°C to +25°C).
Operating Temperature -40° C to +85° C
*Manufacturer reserves the right to change product specification without prior notice.
44
www.carlingtech.com
F-Series Circuit Breaker - General Specifications
Table A: Lists ULTables
Listed (489)and CSA Certified (C22.2 N0. 5.1-M) configurations and performance
Electrical
capabilities as a Molded Case Circuit Brekaer
Table A: Lists UL Listed (489)and CSA Certified (C22.2 N0. 5.1-M) configurations and performance capabilities as a Molded Case Circuit
Breaker
F SERIES TABLE A : UL489 LISTED BRANCH CIRCUIT BREAKERS
VOLTAGE
CIRCUIT
CONFIGURATION
SERIES
MAX
RATING
CURRENT
RATING
FREQUENCY PHASE
INTERRUPTING
CAPACITY (AMPS)
FULL LOAD
AMPS
UL / CSA
1 - 3 POLES
TUV 2
1 or 2 POLES
125
DC
---
50 - 250
50,000
25,000
120 / 240 1
277
50 / 60
50 / 60
1
1
100 - 250
100 - 250
10,000
10,000
-----
208Y / 120
50 / 60
3
100 - 250
10,000
---
Notes:
NOTES:
1 120/240V rating available in 2 or 3 poles. In a 3 pole construction the center pole is Neutral.
TUV constructions
not availablein
with
and 150-250
ratings
only.
1.2 120/240V
ratingareavailable
2 AC
orratings
3 poles.
In a 3amp
pole
construction
the center pole is Neutral.
2. TUV constructions are not available with AC ratings.
Table B: Lists UL Listed configurations and performance capabilities as Circuit Breakers for use in Communications Equipment
(Guide DITT, File E189195), under UL489A
Agency Certifications
UL Listed
UL 489
UL 489A
www.carlingtech.com
Circuit Breakers , Molded Case
(Guide DIVQ, File E129899)
Complies with the requirements
of the CSA Standard for Molded
Case Circuit Breakers,
CANCSA- C22.2 No. 5.1 –M
Circuit Breakers for Use in
Communications Equipment
(Guide DITT, File E189195)
TUV Certified
IEC 60947-2
Low Voltage Switchgear and Control
Gear under TUV License No.
R72031058
45
F-Series Circuit Breaker - Handle – Ordering Scheme
F A 2
1
Series
2
Actuator
B 0
4
Circuit
3
Poles
14
5
Aux/Alarm
Switch
6
Frequency
& Delay
2 ACTUATOR
A
Handle, one per pole
S
Mid-Trip Handle, one per pole
T
Mid-Trip Handle, one per pole & Alarm Switch
2
4 CIRCUIT
A 1 Switch Only (no coil)
B Series Trip (current)
C 2 Series Trip (voltage)
Two
3
DC Medium
DC Long
AC Short
AC Medium
AC Long
7 CURRENT RATING (AMPERES)
CODEAMPERES
810
912
815
917
100.000
125.00
150.00
175.00
820 200.00
922225.00
825 250.00
830 8 300.00
835 8350.00
840 8 400.00
845 8 450.00
850 8 500.00
860 8 600.00
870 8 700.00
OR VOLTAGE COIL (MIN. TRIP RATING, VOLTS) 7
CODEAMPERES
A06 6 DC, 5 DC
A12 12 DC, 10 DC
A18 18 DC, 15 DC
A24 24 DC, 20 DC
A32 32 DC, 25 DC
A48 48 DC, 40 DC
8 TERMINAL
Back Connected (Front Mounted Only)
1 9
3/8-16 Stud 2 14
3/8-16 Screw, Line & Load 5 14
3/8-16 Short Stud Front Connected (Back Mounted Only) 11 3
Box Wire Connector, Line & Load 4 14
3/8-16 Screw, Line & Load 46
10
Mounting
Dual
1
2
B G
11
Max. App.
Rating
12
Agency
Approval
Marking Color
Black
White
Back Mounting Inserts
10-32 screw clearance holes
10-32 screw clearance holes
Three
5 AUXILIARY SWITCH 5
0 without Auxiliary Switch
7 S.P.S.T. 0.110 Q.C. Terminals
2 S.P.D.T. 0.110 Q.C. Terminals
(Gold Contacts)
3 S.P.D.T. 0.139 Solder Lug
8 S.P.S.T. 0.187 Q.C. Terminals
4 S.P.D.T. 0.110 Q.C. Terminals
9 S.P.D.T. 0.187 Q.C. Terminals
(Gold Contacts)
A 6 S.P.S.T., 0.093 Round
5 S.P.S.T., 0.093 Q.C. Terminals
QC Terminals
(Gold Contacts)
B 6 S.P.D.T., 0.093 Round
6 S.P.S.T. 0.110 Q.C. Terminals
QC Terminals
14 16 22 24 26 9
Actuator
Color
10 MOUNTING
Front Mounting Inserts
A
10-32
B
ISO M5
Parallel Pole Construction:
M 3,4 Series Trip (Current) with Metering Shunt
N 3,4 Switch Only with Metering Shunt
P 3 Series Trip (Current)
Q 3 Switch Only
6 FREQUENCY & DELAY
03 DC 50/60Hz, Switch Only
10 7 DC Instantaneous
11 DC Ultra Short
12 DC Short
7
Current Rating
1 2 A
8
Terminal
9 ACTUATOR COLOR & LEGEND 12,13
Actuator Color
I-O
ON-OFF
White
AB
Black
CD
1 SERIES
F
3 POLES
1
One
820
A65 65 DC, 55 DC
B25 125 DC, 100 DC
J06 6 AC, 5 AC
11 MAXIMUM APPLICATION RATING
VOLTAGECURRENT
B
125 VDC
700A
C 15
120/240250A
F
277 VAC
250A
7 16
120/208 VAC
250A
12 AGENCY APPROVAL
A
No approvals
G
UL489 Listed & CUL Certified
J
UL489 Listed, CUL Certified & TUV Certified
T
UL489A (Telecom) Listed
Notes:
1 For 100 to 250 amps, select Current Code 825. For 300-400 amps, select Current Code 840. For 450-700 amps, select Current Code 870.
2 Available with Frequency and Delay code 10 or 20 only, and are not rated for continuous duty. Delay 10 and 20 are only available with voltage coils.
3 3 Codes M, N, P & Q (Parallel Poles) are supplied with factory installed Bus Bar on Line and Load.
4 4 Metering terminals are female pin type, ref. Molex part number 02-09-1101, model 1189-T.
5 Auxiliary Switch breakers are only available with Series Trip and Switch Only circuits. On multi-pole breakers, one Auxiliary Switch is supplied, mounted in the extreme right pole per figure A. Back-Mounted breakers require special mounting provisions when an Auxiliary Switch is specified.
6 Available with parallel pole construction (circuit codes P and Q, and breakers with circuit codes M and N).
7 Frequency and delay code 10 is only available with Voltage Coils. Voltage Coils are not rated for continuous duty.
8 Ratings over 250 amps are only available with Agency Approval code T (UL489A) and are Parallel Pole configuration (circuit codes M, N, P and Q.) 300-450 amp ratings are available on two pole breakers. 500-700 amp ratings are available on three pole
breakers.
9 Per UL requirement, an “Anti-Flash Over Barrier” is supplied between poles on multipole
breakers with 3/8 - 16 stud terminals (Terminal Code 1) on AC rated breakers only.
10 Front connected breakers can also be front mounted by utilizing the supplied front panel mounting inserts. Terminal connections must be made before mounting.
11 Box Wire connector will accept #6 through 250 MCM copper wire.
12 Agency codes G & T must have ON-OFF or dual legends. Agency code J must have dual legend.
13 Other colors available. Consult factory.
14 Terminals 2,4 & 5 are shipped without terminal hardware.
15 2 or 3 Pole Circuit Breaker Required for 120/240 VAC Rating.
16 3 Pole Circuit Breaker Required for 120/208 VAC Rating.
Max Rating
250A
700A
250A
Max Rating
700A
700A
www.carlingtech.com
F-Series Circuit Breaker - Handle – Circuit & Terminal Diagrams
Circuit & Terminal Diagrams: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
www.carlingtech.com
47
F-Series Circuit Breaker - Handle – Circuit & Terminal Diagrams
Circuit & Terminal Diagrams: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
48
www.carlingtech.com
F-Series Circuit Breaker - Handle – Dimensional Specifications
Dimensional Specifications: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
www.carlingtech.com
49
F-Series Circuit Breaker - Handle – Dimensional Specifications
Dimensional Specifications: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
50
www.carlingtech.com
F-Series Circuit Breaker - Handle – Dimensional Specifications
Dimensional Specifications: in. [mm]
F-Series breakers are available up to 700A, and are also available with a 25 millivolt metering shunt construction.
This optional construction provides a safe method for monitoring current flowing through the breaker by simply
connecting a meter with light gauge wire to the appropriate terminals located on the shunt housing at the rear of
the breaker. You can customize the application by measuring and displaying percentage of current, watts or safe/
danger zones.
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
www.carlingtech.com
51
F-Series Circuit Breaker - Handle – Dimensional Specifications
Dimensional Specifications: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
52
www.carlingtech.com
Time Delay Values - C, CX-Series Circuit Breakers
A, B, C, CX, D, G, H, L, N-SERIES TIME VALUES
PERCENT OF RATED CURRENT
Notes:
UL489 C-Series Breakers available with Delay Curves 11, 12, 14, 16, 21, 22, 24, 26, 42, 44, 46.
Delay Curves 11,12,14,16,21,22,24,26,42,44,46,52,54,56: Breakers to hold 100% and must trip at 125% of rated current and greater within the time limit shown in this curve.
Delay Curves 32,34,36: Breakers to hold 100% and must trip at 135% of rated current and greater within the time limit shown in this curve.
Delay Curves 10,20: Breakers to hold 100% and must trip at 150% of rated current and greater within the time limit shown in this curve.
All Curves: Curve data shown represents breaker response at ambient temperature of 77°F (25°C) with no preloading. Breakers are mounted in standard wall-mount position.
On 50 amp and less current ratings, the minimum inrush pulse tolerance handling capability is 12 times the rated current on standard delays and 25 times the rated current on high inrush delays. These values are based on a 60
Hz 1/2 cycle, 8.33 ms pulse. High inrush delays should be specified for applications with high initial surge currents of short duration such as switching power supplies, highly capacitive loads and transformer loads.
DC
TRIP TIME IN SECONDS
AC
TRIP TIME IN SECONDS
Instantaneous
PERCENT OF RATED CURRENT
PERCENT OF RATED CURRENT
TRIP TIME IN SECONDS
TRIP TIME IN SECONDS
Ultrashort
PERCENT OF RATED CURRENT
PERCENT OF RATED CURRENT
TRIP TIME IN SECONDS
TRIP TIME IN SECONDS
Short
PERCENT OF RATED CURRENT
www.carlingtech.com
PERCENT OF RATED CURRENT
53
Time Delay Values - C, CX-Series Circuit Breakers
TRIP TIME IN SECONDS
DC
TRIP TIME IN SECONDS
AC
Medium
TRIP TIME IN SECONDS
PERCENT OF RATED CURRENT
TRIP TIME IN SECONDS
PERCENT OF RATED CURRENT
Long
PERCENT OF RATED CURRENT
TRIP TIME IN SECONDS
High Inrush DC
TRIP TIME IN SECONDS
High Inrush AC
Short
TRIP TIME IN SECONDS
PERCENT OF RATED CURRENT
TRIP TIME IN SECONDS
PERCENT OF RATED CURRENT
Medium
TRIP TIME IN SECONDS
PERCENT OF RATED CURRENT
TRIP TIME IN SECONDS
PERCENT OF RATED CURRENT
Long
PERCENT OF RATED CURRENT
54
PERCENT OF RATED CURRENT
PERCENT OF RATED CURRENT
www.carlingtech.com
Time Delay Values - C, CX-Series Circuit Breakers
AC/DC
TRIP TIME IN SECONDS
Short
PERCENT OF RATED CURRENT
TRIP TIME IN SECONDS
Medium
PERCENT OF RATED CURRENT
TRIP TIME IN SECONDS
Long
PERCENT OF RATED CURRENT
www.carlingtech.com
55
Time Delay Values - E-Series Circuit Breaker
NOTES
Delay Curves 10,20,30: Breakers to hold 100% and must trip at 150% of rated current and greater wthin the time limit shown in these curves.
Delay Curves 12,14,16,22,24,26,62,64,66,72,74,76: Breakers to hold 100% and must trip at 125% of rated current and greater wthin the time limit shown in these curves.
Delay Curves 32,34,36,92,94,96: Breakers to hold 100% and must trip at 135% of rated current and greater wthin the time limit shown in these curves.
All curves: Data shown represents breaker response at ambient temperature of 77°F (25°C) with no preloading: Breakers are mounted in standard wall-mount position.
The minimum inrush pulse tolerance handling capacity on the above standard delays is 16 times rated current &20 times rated current for high inrush delays based on a 60Hz 1/2 cycle, 8.33 ms pulse.
DC
TRIP TIME IN SECONDS
AC
TRIP TIME IN SECONDS
Instantaneous
PERCENT OF RATED CURRENT
PERCENT OF RATED CURRENT
TRIP TIME IN SECONDS
TRIP TIME IN SECONDS
Short
PERCENT OF RATED CURRENT
PERCENT OF RATED CURRENT
TRIP TIME IN SECONDS
TRIP TIME IN SECONDS
Medium
PERCENT OF RATED CURRENT
PERCENT OF RATED CURRENT
TRIP TIME IN SECONDS
TRIP TIME IN SECONDS
Long
PERCENT OF RATED CURRENT
56
PERCENT OF RATED CURRENT
www.carlingtech.com
Time Delay Values - E-Series Circuit Breaker
TRIP TIME IN SECONDS
Instantaneous
AC/DC
PERCENT OF RATED CURRENT
TRIP TIME IN SECONDS
Short
PERCENT OF RATED CURRENT
TRIP TIME IN SECONDS
Medium
PERCENT OF RATED CURRENT
TRIP TIME IN SECONDS
Long
PERCENT OF RATED CURRENT
www.carlingtech.com
57
Time Delay Values - F-Series Circuit Breaker
Short - AC 22
11
No Trip
.013 - .125
.010 - .070
.008 - .032
.006 - .020
.005 - .020
.004 - .020
.004 - .020
12
No Trip
.475 - 10.0
.275 - 2.80
.140 - .850
.030 - .190
.015 - .125
.010 - .050
.008 - .038
14
16
22
24
26
No Trip
No Trip
No Trip
No Trip
No Trip
10.0 - 110
110 - 1000
.700 - 12.0
10.0 - 160
50.0 - 700
6.00 - 40.0
60.0 - 400
.350 - 4.00
6.00 - 60.0
32.0 - 350
2.50 - 15.0
22.0 - 150
.130 - 1.30
.220 - 20.0
10.0 - 90.0
.500 - 3.00
4.00 - 25.0
.027 - .220
.300 - 3.00
1.50 - 15.0
.180 - 1.00
1.00 - 5.50
.008 - .130
.050 - 1.30
.500 - 7.00
.010 - .280
.008 - .080
.008 - .390
.004 - .045
.005 - .060
.006 - 2.00
AC
Ultrashort - DC
.010 - 1.80
.004 - .090
.007 - .500
.020 - 3.00
DC
TRIP TIME IN SECONDS
TRIP TIME IN SECONDS
F SERIES
50/60 HZ SHORT
CURVE NO. 22
PERCENT OF RATED CURRENT
Short - DC
PERCENT OF RATED CURRENT
TRIP TIME IN SECONDS
F SERIES
50/60 HZ MEDIUM
CURVE NO. 24
TRIP TIME IN SECONDS
Medium - AC 24
Medium - DC
PERCENT OF RATED CURRENT
Long - AC 26
TRIP TIME IN SECONDS
F SERIES
50/60 HZ LONG
CURVE NO. 26
PERCENT OF RATED CURRENT
TRIP TIME IN SECONDS
Long - DC
PERCENT OF RATED CURRENT
58
TRIP TIME IN SECONDS
PERCENT OF RATED CURRENT
www.carlingtech.com
Carling Technologies Catalogs
There are several catalogs available featuring complete details on all Carling Technologies products.
Below is a list of useful information such as catalogs, brochures and videos. Please visit our website at
carlingtech.com or scan the QR codes below for complete details.
www.carlingtech.com
Watch Company Profile Video
Switches & Controls
Hydraulic-Magnetic
SWITCHES & CONTROLS
Rocker, Toggle, Pushbutton & Rotary
CATALOG
Circuit Protection
CATALOG
catalog
catalog
Complete line and ordering details for
Switches & Control products including
Rocker, Toggle, Pushbutton, and Rotary
style switches.
Complete line and ordering details for
all hydraulic-magnetic circuit breakers.
Thermal
GFCI / ELCI
GFCI / ELCI
THERMAL
Circuit Protection
Circuit Protection
CATALOG
catalog
Complete line and ordering details for
all thermal circuit breakers.
www.carlingtech.com
CATALOG
catalog
Complete line and ordering details for
all GFCIs/ELCIs.
59
Carling Technologies Catalogs
Marine
On-Off Highway
MARINE
ON/OFF HIGHWAY
Switches, Circuit Protection & ELCI/GFCIs
Switches & Controls
catalog
brochure
catalog
brochure
Complete line of ELCIs, thermal and hydraulic-magnetic
circuit breakers specific for marine applications.
Complete line of switches, controls and custom
solutions specific for on-off highway applications.
Renewable Energy
Military
MILITARY
RENEWABLE ENERGY
Circuit Breakers & Disconnects
COTS Switches & Circuit Breakers
catalog
brochure
catalog
brochure
Complete line of circuit breakers and disconnect
products specific for renewable energy applications.
Complete line of COTS (Commercial-Off-The-Shelf) switches
and circuit breakers specific for military applications.
Telecom/Datacom
Industrial Automation
TELECOM/DATACOM
INDUSTRIAL AUTOMATION
AND CONTROLS
Circuit Protection
Circuit Protection & Switches
catalog
brochure
Complete line of hydraulic-magnetic circuit breakers
specific for telecom/datacom applications.
60
brochure
Complete line of switches and circuit breakers specific
for industrial automation & controls applications.
www.carlingtech.com
Reps & Contact
Authorized Sales Representatives
Click on the group name on the map below to find your local representative or visit
www.carlingtech.com/findarep.
«
«
Matera
W. Canada
Matera
E. Canada
MIDWEST
DM
Michigan
TEMCO Northwest
Alaska, Hawaii
«
NORTHERN
Hanna Lind Ltd.
Melody
Emery
Sierra
Bridge Marketing
Omega Limited
Dy-tronix Inc.
LD. Allen
Norris
DM Assoc
East
Pacent
DM
Assoc
TSI North
TSI
WEST
Signal
Enterprises
Luscombe
Engineering
Pinnacle Marketing
Matrix
DM Mexico
South America
Mexico
«
«
Sunbelt Components
SOUTHEAST
ProRep
Solutions
LATIN AMERICA
Americas
Europe
Middle East
Africa
Asia-Pacific
Oceania
About Carling
Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches
and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power
distribution systems. With four ISO registered manufacturing facilities and technical sales offices worldwide,
Carling Technologies Sales, Service and Engineering teams do much more than manufacture electrical
components, they engineer powerful solutions! To learn more about Carling please visit
www.carlingtech.com/company-profile.
To view all of Carling’s environmental, quality, health & safety certifications please visit
www.carlingtech.com/environmental-certifications
www.carlingtech.com
61
Worlwide Headquarters
Asia-Pacific Headquarters
60 Johnson Avenue, Plainville, CT 06062
Tel: (860) 793-9281
Fax: (860) 793-9231
Email: [email protected]
Web: www.carlingtech.com
Kowloon, Hong Kong
Tel: Int + 852-2737-2277
Fax: Int + 852-2736-9332
Email: [email protected]
Carling Technologies, Inc.
Northern Region Sales Office
Carling Technologies, Asia-Pacific Ltd.
Shenzhen, China
[email protected]
Europe/Middle East/
Africa Headquarters
Carling Technologies Ltd.
4 Airport Business Park, Exeter
Airport, Clyst Honiton, Exeter,
Devon, EX5 2UL, UK
Tel: Int + 44 1392-364422
Fax: Int + 44 1392-364477
Email: [email protected]
[email protected]
Shanghai, China
[email protected]
Pune, India
Germany
[email protected]
Kaohsiung, Taiwan
France
[email protected]
Yokohama, Japan
Southeast Region Sales Office
Midwest Region Sales Office
West Region Sales Office
Latin America Sales Office
[email protected]
RE NEWABL E ENERG Y- C_04_2016
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]