Carling Technologies, Inc.

C-Series
Circuit Breaker
The C-Series hydraulic/magnetic circuit breakers are
ideal for applications that require higher amperage and
voltage handling capability in a smaller package. They are
available in 1-6 poles, 0.02-100amps, UL Recognized up to
480VAC or 150VDC, UL489 Listed up to 240VAC or 125VDC,
with choice of time delays, terminal options, actuator
styles and colors.
HANDLE ACTUATOR
METAL TOGGLE ACTUATOR
Product Highlights:
The UL489 C-Series employs a unique arc chute design
which allows for higher interrupting capacities of up to
10,000 amps. New thermoset glass filled polyester half
shell construction provides for increased mechanical
and electrical strength. The wiping contacts, mechanical
linkage with two step actuation, clean contacts
providing high, positive contact pressure and longer
contact life
ŠŠ Available with American Standard or Metric Threaded
Stud terminals, or Saddle Clamp screw terminals.
Optional mid-trip handle style actuator allows visual
indication of electrical overload with or without alarm
feature
ŠŠ Available with new solid color rocker actuators and
unique two-color Visi-rocker® actuators, which can be
specified to indicate either the ON or TRIPPED/OFF
mode
ŠŠ Exclusive Rockerguard and Push-To-Reset bezel help
prevent inadvertent actuation
ŠŠ
Carling Technologies, Inc.
60 Johnson Avenue • Plainville, CT 06062-1177
Phone: (860) 793-9281 • Fax: (860) 793-9231
Email: [email protected] • www.carlingtech.com
PARALLEL POLE ACTUATOR
Agency Certifications:
UL Recognized
UL Standard 1077 | UL Standard 508
UL Standard 1500
UL Listed
UL Standard 489 | UL Standard 489A
CSA Accepted | CSA Certified
TUV Certified | VDE Certified
* For full Agency Certifications, please see pg. 6
2 | C-Series – General Specifications
Electrical Tables
Table A: Lists UL Recognized & CSA Accepted configurations and performance capabilities as a Component Supplementary
Protector
150
80-100
TC1, OLO, U3
150
101-175
TC, OLO, U3
Agency Code L
Agency Code L Parallel Pole
Notes for Table A:
1
Requires branch circuit backup with a UL LISTED Type K5 or RK5 fuse rated 15A minimum and no more than 4 times full load amps not to exceed 125A for 50 Amp or less rating and not to exceed 175 for 51 through 100 Amp rating
*Manufacturer reserves the right to change product specification without prior notice.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com
C-Series – General Specifications | 3
Electrical Tables
Table B: Lists UL Recognized and CSA Accepted configurations and performance capabilities as a Manual Motor Controller.
RELAY
Notes for Table B:
1
UL recognized and CSA Accepted at 480V refers to 3 & 4 pole versions used in a 3Ø, wye connected circuit or 2-pole version connected with 2 poles breaking. 1Ø and backed up with series fusing as stated above in note 1.
*
Series, Shunt and Relay Trip - Voltage Coil Construction not current coils
Table C: Lists UL Recognized, CSA Accepted , VDE and TUV Certified configurations and performance capabilities as a
Component Supplementary Protector.
Notes for Table C:
1
General Purpose ratings for UL/CSA only.
2
Requires branch circuit backup with a UL LISTED Type K5 or RK5 fuse rated 15A minimum and no more than 4 times full load amps not to exceed 125A for 50 Amp or less rating and not to exceed 175 for 51 through 100 Amp rating.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com
4 | C-Series – General Specifications
Electrical Tables
Table D: Lists UL Listed (489), CSA Certified (C22.2 No. 5.1-M) configuration and performance capabilities as a Molded Case
Circuit Breaker.
C SERIES TABLE D : UL489 LISTED BRANCH CIRCUIT BREAKERS
CIRCUIT
CONFIGURATION
SERIES
DUAL COIL
INTERRUPTING
CAPACITY
(AMPS)
WITHOUT
FULL LOAD
BACKUP FUSE
AMPS
CURRENT
RATING
VOLTAGE
MAX.
RATING
FREQUENCY
PHASE
80
DC
---
0.10 - 100
CONSTRUCTION NOTES
50,000 1
Limited to 2 Poles Max from 71 - 100 Amps.
10,000
Limited to 2 Poles Max from 71 - 100 Amps.
125
DC
---
0.10 - 100
5,000
1 - 3 Poles
125 / 250
DC
---
0.10 - 50
5,000
1 or 2 Poles (2 Poles Required for 250 Volts)
120
50 / 60
1
0.10 - 50
10,000
1 - 3 Poles
51 - 70
5,000
120 / 240
50 / 60
1
0.10 - 50
5,000
0.10 - 50
10000
240
50 / 60
1
0.10 - 30
5,000
240
50 / 60
1
0.10 - 20
5,000
2 Pole
277
50 / 60
1
0.10 - 20
10,000
1Pole
120
50 / 60
1
0.10 - 30
10,000
---
1 - 3 Poles
2 or 3 Poles. 1 Pole of a 3 Pole Unit is Neutral
1
2 or 3 Poles. 1 Pole of a 3 Pole Unit is Neutral
1Pole
Notes from Table D:
1
Special catalog number required. Consult factory.
Table E: Lists UL Recognized, CSA Accepted configurations and performance capabilities as Protectors, Supplementary for
Marine Electrical and Fuel Systems (Guide PEQZ2, File E75596). Ignition Protected per UL 1500. UL Classified Small Craft
Electrical Devices, Marine in accordance with ISO 8846 (Guide UZMK, File MQ1515) as Marine Supplementary Protectors.
Table F: Lists UL Listed configurations and performance capabilities as Circuit Breakers for use in Communications Equipment
(Guide DITT, File E189195), under UL489A.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com
C-Series – General Specifications | 5
Electrical
Mechanical
Maximum Voltage
AC, 480 WYE/277 VAC, 50/60 Hz
(see Table A.)
UL489: AC,240 VAC. (Table D),
50/60 Hz, 125 VDC, UL 1077,
150 VDC, 277 VAC
Standard current coils: 0.100,
0.250, 0.500, 0.750, 1.00, 2.50,
5.00, 7.50, 10.0, 15.0, 25.0, 30.0, 35.0, 40.0, 50.0, 60.0, 70.0, 80.0,
90.0 and 100 amps. Other ratings
available, see Ordering Scheme.
DC - 6V, 12V; AC - 120V; other
ratings available, see Ordering
Scheme.
SPDT; 10.1 amps-250VAC, DC
Aux. Switch 1.0A, 65 VDC. 0.5A,
80VDC,1/4 HP, 125VAC,VDE & TUV
1.0 125 VAC.
Minimum of 100 Megohms at 500 VDC.
UL, CSA: 1960 V 50/60 Hz for one
minute between all electrically
isolated terminals. C-Series
Circuit Breakers comply with the
8mm spacing and 3750V 50/60
Hz dielectric requirements from
hazardous voltage to operator
accessible surfaces, between
adjacent poles and from main
circuits to auxiliary circuits per
Publications EN 60950 and VDE
0805.
Values from Line to Load Terminal
based on Series Trip Circuit
Breaker.
Current Rating
Standard Voltage Coils
Auxiliary Switch Rating
Insulation Resistance
Dielectric Strength
Resistance, Impedance
RESISTANCE, IMPEDANCE VALUES
from Line to Load Terminals
(Values Based on Series Trip Circuit Breaker )
1000
CURRENT
(AMPS)
TOLERANCE
(%)
0.10 - 5.0
± 15%
20.1 - 100.0
± 35%
100
5.1 - 20.0
10
O
H
M
S
1
0.1
60 Hz 1/2 Cycle
Inrush Pulse Tolerance
Time Delay Curves
42, 44 & 46
(50 Amps Max.)
Multiple of
Rated Current
Ir
25x
0.01
Time Delay Curves
22, 24 (100 Amps Max.)
26 (70 Amps Max.)
12x
0.001
0.01
1
0.1
10
± 25%
100
t
AMPERE RATING
4.165
8.33
16.67
Pulse Tolerance Curves
TOLERANCE
(%)
± 15%
± 25%
± 35%
25x
1
Time Delay Curves
22, 24 (100 Amps Max.)
26 (70 Amps Max.)
12x
50 Hz 1/2 Cycle
Inrush Pulse Tolerance
Time Delay Curves
42, 44 & 46
(50 Amps Max.)
22x
Time Delay Curves
22, 24 (100 Amps Max.)
26 (70 Amps Max.)
10x
t
t
4.165
Ir
Multiple of
Rated Current
Ir
Multiple of
Rated Current
FIGURE
Time Delay Curves
42, 44 & 46
(50 Amps Max.)
Multiple of
Rated Current
Ir
CURRENT
(AMPS)
0.100 - 5.0
- 20.0
60 Hz 1/25.1
Cycle
- 100
Inrush Pulse20.1
Tolerance
8.33
5.0
16.67
20.0
Time in
Milliseconds
50 Hz 1/2 Cycle
Inrush Pulse Tolerance
Time Delay Curves
42, 44 & 46
(50 Amps Max.)
22x
10.0
Endurance
Trip Free
Trip Indication
10,000 ON-OFF operations @ 6 per
minute; with rated current & voltage
All C-Series circuit breakers will trip
on overload, even when actuator is
forcibly held in the ON position.
The operating actuator moves
positively to the OFF position when
an overload causes the breaker to
trip. With mid-trip, handle moves to
the mid position on electrical trip
of the circuit breaker. With mid trip
handle with alarm switch, handle
moves to the mid position and
the alarm switch actuates when
the circuit breaker is electrically
tripped.
Physical
Number of Poles
1-6 poles ≤ 50A; 1-4 poles @ 5170A; 1-2 poles 71-100A. UL489
Handle: 1 pole ≤ 100A, 2 pole ≤
50A; Rocker: 1 pole ≤ 100A.
Internal Circuit Configuration Series (with or without auxiliary
switch, mid trip & mid trip with
alarm switch) Shunt & Relay with
current or voltage trip coils, Dual
Coil, Switch Only (with or without
aux. switch). UL489: Series (with or
without auxiliary switch, mid-trip &
mid-trip with alarm switch).
Weight
Approx.112 grams/pole ( 3.95 oz).
Standard Colors
Housing: Black
Environmental
Designed and tested in accordance with requirements of
specification MIL-PRF-55629 & MIL-STD-202 as follows:
Shock
Withstands 100 Gs, 6ms sawtooth
while carrying rated current per
Method 213, Test Condition “I”.
Instantaneous and ultrashort curves
tested @ 90% of rated current.
Vibration
Withstands 0.060” excursion from
10-55 Hz & 10 Gs 55-500 Hz, @
rated current per Method 204C,
Test Cond. A. Instantaneous &
ultrashort curves tested @ 90% of
rated current.
Moisture Resistance
Method 106D, i.e., ten 24-hour
cycles @ +25°C to +65°C, 80-98%
RH.
Salt Spray
Method 101, Condition A (90-95%
RH @ 5% NaCl Solution, 96 hrs).
Method 107D, Condition A (five
Thermal Shock
cycles @ -55°C to +25°C to +85°C
to +25°C).
Operating Temperature
-40°C to +85°C
Time Delay Curves
22, 24 (100 Amps Max.)
26 (70 Amps Max.)
10x
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com
t
5.0
10.0
20.0
Time in
Milliseconds
6 | C-Series - Agency Certifications
Agency Certifications:
UL Recognized
UL Standard 1077
Component Recognition Program as Protectors, Supplementary (Guide CCN/QVNU2, File E75596)
UL Standard 508
Motor Controllers, Manual
(Guide CCN/NLRV2, File E135367)
UL Standard 1500
Protectors, Supplementary for Marine Electrical & Fuel Systems
(Guide PEQZ2, File E75596)
Ignition Protection
UL Listed
UL Standard 489
Circuit Breakers, Molded Case,
(Guide DIVQ, File E129899)
UL Standard 489A
Communications Equipment
(Guide CCN/DITT, File E189195)
CSA Accepted
Component Supplementary Protector under Class 3215 30,
File 047848 0 000
CSA Standard C22.2 No. 235
CSA Certified
Circuit Breaker Model Case
(Class 1432 01, File 093910),
CSA Standard C22.2 No. 5.1 - M
TUV Certified
EN60934, under License No. R72041016
VDE Certified
EN60934, VDE 0642 under File No.
10537
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com
C-Series Handle UL Recognized – Ordering Scheme | 7
C A 3 — B 0 — 10 — 450 — 1 2 1 — C
1
Series
2
Actuator
4
Circuit
3
Poles
5
Aux/Alarm
Switch
6
Frequency
& Delay
2 ACTUATOR1
Handle, one per pole
Handle, one per multipole unit
Mid-Trip Handle, one per pole
Mid-Trip, one per pole & Alarm Switch
3 POLES2
1
2
3
4
One
Two
Relay Trip (current)
Relay Trip (voltage)
Dual Coil with Shunt Trip
Voltage Coil
Dual Coil with Relay Trip
Voltage Coil
5 AUXILIARY/ALARM SWITCH
5
S.P.S.T., 0.110 Q.C. Term.
(Gold Contacts)
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.110 Q.C. Term.
(Gold Contacts)
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
Switch Only (no coil)
Series Trip (current)
Series Trip (voltage)
Shunt Trip (current)
Shunt Trip (voltage)
w/o Aux Switch
S.P.D.T., 0.110 Q.C. Term.
S.P.D.T., 0.139 Solder Lug
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
6 FREQUENCY & DELAY
033
107
11
12
14
16
207
21
22
24
26
Notes:
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Five
Six
F4
G4
H4,5
K4,5
0
2
3
4
2
5
6
Three
Four
4 CIRCUIT3
A3
B
C
D4
E4
8
Terminal
9
Actuator
Color
10
Mounting
Bezel/Barrier
11
Agency
Approval
7 CURRENT RATING (AMPERES)
1 SERIES
C
A
B
S
T
7
Current Rating
DC 50/60Hz, Switch Only
DC Instantaneous
DC Ultra Short
DC Short
DC Medium
DC Long
50/60Hz Instantaneous
50/60Hz Ultra Short
50/60Hz Short
50/60Hz Medium
50/60Hz Long
6
7
8
9
CODE
AMPERES
CODE
RATING
020 0.020
235 0.350
430 3.000
025 0.025
240 0.400
435 3.500
030 0.030
245 0.450
440 4.000
035 0.035
250 0.500
445 4.500
040 0.040
255 0.550
450 5.000
045 0.045
260 0.600
455 5.500
050 0.050
265 0.650
460 6.000
055 0.055
270 0.700
465 6.500
060 0.060
275 0.750
470 7.000
065 0.065
280 0.800
475 7.500
070 0.070
285 0.850
480 8.000
075 0.075
290 0.900
485 8.500
080 0.080
295 0.950
490 9.000
085 0.085
410 1.000
495 9.500
090 0.090
512 1.250
610 10.000
095 0.095
415 1.500
710 10.500
210 0.100
517 1.750
611 11.000
215 0.150
420 2.000
711 11.500
220 0.200
522 2.250
612 12.000
225 0.250
425 2.500
712 12.500
230 0.300
527 2.750
613 13.000
VOLTAGE COIL (NORMINAL RATED VOLTAGE)7
614
615
616
617
618
620
622
624
625
630
635
640
650
6609
6709
6809
6859
6909
6959
8109
A06 6DC
A12 12DC
A18 18DC
A24 24DC
J65 65AC
K20 120AC
L40 240AC
8 TERMINAL15
30
31
32
34
36
428
448
468
528
548
56
DC 50/60Hz Instantaneous
DC 50/60Hz Ultra Short
DC 50/60Hz Short
DC 50/60Hz Medium
DC 50/60Hz Long
50/60Hz Short, Hi-Inrush
50/60Hz Medium, Hi-Inrush
50/60Hz Long, Hi-Inrush
DC Short, Hi-Inrush
DC Medium, Hi-Inrush
DC Long, Hi-Inrush
Actuator Code:
A: Handle tie pin spacer(s) and retainers provided assembled with multi-pole units.
B: Handle location as viewed from front of breaker:
2 pole - left pole
3 pole - center pole
4 pole - two handles at center poles 5 pole - three handles at center poles
6 pole - four handles at center poles
S: Handle moves to mid-position only upon electrical trip of the breaker. Available with
circuit codes B, C, D, E, F, G, H and K.
T: Handle moves to mid-position and alarm switch activates only upon electrical trip of
the breaker. Available with circuit codes B & C.
Standard multipole units have all poles identical except when specifying auxilary switch
and/or mixed poles. 4 pole max w/VDE. 5th pole available as Series Trip w/Voltage Coil only.
Switch Only circuits, rated up to 50 amps and 6 poles, and only available with VDE Certification when tied to a protected pole (Circuit Code B, C, D or H.). For .02 to 30 amps,
select Current Code 630. For 35 - 50 amps, select Current Code 650. For 55-70 amps,
select Current Code 670. For 75-100 amps, select Current Code 810.
Circuit Codes D,E,F,G,H & K available with Terminal Codes 1,2,4 & 5 only. Circuit Codes
D, F, H & K available up to 50 amps maximum Current Rating.
Consult factory for available Dual Coil options, as special catalog number is required.
Dual Coil Voltage Coils with Shunt Trip Construction trip instantaneously on line voltage.
Dual Coil Voltage Coils require 30VA minimum power to trip instantaneously and are
rated for intermittent duty only.
ers, one aux. switch is supplied, mounted in the extreme right pole.
Voltage coils not rated for continuous duty. Available only with delay codes 10 and 20.
Available with Circuit Codes B & D only, and up to 50 amps maximum.
Current Ratings 60 - 70 are available up to four poles maximum. Ratings 71 - 100 are
available up to two poles maximum.
Terminal Code 1 available to 60 amps maximum.
Terminal Codes 2,4,5 and C available to 50 amps maximum.
Terminal Codes 3,6 & 9 available to 100 amps maximum.
Terminal Code 7 available to 25 amps maximum.
Terminal Code A available to 100 amps maximum.
Terminal Codes 7,8,9 & C are not VDE approved.
No marking available. Consult factory. VDE/TUV Approval requires dual (I-O, ON-OFF)
or I-O markings on all handles.
Single pole only.
VDE/TUV: 30 amps max.; UL/CSA: 50 amps max.; Available in 2 - 4 poles only and
limited to AC Delays. “General Purpose amps” not rated for “full load amps” or to be
used in applications with a motor.
110
211
312
411
511
A32
A48
A65
J06
32DC
48DC
65DC
6AC
Stud 10-32, threaded
Screw 10-32
Screw 1/4-20, threaded
Screw M5 x 0.8, threaded
Screw M5 x 0.8
J12
J18
J24
J48
612
713,15
815
912,15
A14
C11,15
9 ACTUATOR COLOR & LEGEND16
Actuator Color
I-O
ON-OFF
White
A
B
Black
C
D
Red
F
G
Green
H
J
Blue
K
L
Yellow
M
N
Gray
P
Q
Orange
R
S
Black (short handle)17
T
U
12AC
18AC
24AC
48AC
14.000
15.000
16.000
17.000
18.000
20.000
22.000
24.000
25.000
30.000
35.000
40.000
50.000
60.000
70.000
80.000
85.000
90.000
95.000
100.000
Screw M6, threaded
0.250 Double Click Connect
1/4” Clip Terminal
7/16” Clip Terminal
Plug-In Stud
5/16” Clip Terminal
Dual
1
2
3
4
5
6
7
8
9
Legend Color
Black
White
White
White
White
Black
Black
Black
White
10 MOUNTING/BARRIERS
MOUNTING STYLE
BARRIERS
VOLTAGE
Threaded Insert
< 300
1
6-32 x 0.195 inches
no
< 300
A
6-32 x 0.195 inches
yes
>
C18
6-32 x 0.195 inches
yes
– 300
< 300
2
ISO M3 x 5mm
no
< 300
B
ISO M3 x 5mm
yes
>
D18
ISO M3 x 5mm
yes
– 300
Front Panel Snap-In, 1.00” [25.4mm] wide bezel
17
< 300
E
with Handleguard
no
11 AGENCY APPROVAL
UL Recognized, CSA Accepted
C
VDE Certified, UL Recognized, CSA Accepted
D
TUV Certified, UL Recognized, CSA Accepted
E
UL489 Construction: VDE Certified, UL Recognized, CSA Accepted
H
UL Rec. STD 1077, UL Rec. 1500 (ignition protected), CSA Accepted
I
UL489 Construction: UL Recognized, CSA Accepted
L
UL489 Construction: TUV Certified, UL Recognized, CSA Accepted
R
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com
8 | C-Series Handle Parallel Pole UL489A Listed – Ordering Scheme
C A 2 — P 0 — D4 — 820 — 3 2 1 — M T
1
Series
2
Actuator
4
Circuit
3
Poles
5
Aux/Alarm
Switch
6
Frequency
& Delay
3
6
A
2 ACTUATOR1
Handle, one per pole
Mid-Trip Handle, one per pole
Mid-Trip, one per pole & Alarm Switch
3 POLES3
2
3
Two
Three
Series Trip (parallel pole)
5 AUXILIARY/ALARM SWITCH
0
2
3
4
w/o Aux Switch
S.P.D.T., 0.110 Q.C. Term.
S.P.D.T., 0.139 Solder Lug
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
6 FREQUENCY & DELAY
D1
D2
DC Ultra Short
DC Short
5
6
7
8
9
D4
D6
S.P.S.T., 0.110 Q.C. Term.
(Gold Contacts)
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.110 Q.C. Term.
(Gold Contacts)
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
AMPERES
811 110.000
812 120.000
912 125.000
813 130.000
Notes:
1
2
3
10
Mounting
814
815
816
817
140.000
150.000
160.000
170.000
917
818
819
820
170.000
180.000
190.000
200.000
Dual
1
2
3
4
5
6
7
8
Legend Color
Black
White
White
White
White
Black
Black
Black
10 MOUNTING/BARRIERS
MOUNTING STYLE
Threaded Insert
1
6-32 x 0.195 inches
2
ISO M3 x 5mm
11 MAXIMUM APPLICATION RATING
M
80 DC
DC Medium
DC Long
7 CURRENT RATING (AMPERES)
CODE
9
Actuator
Color
1/4-20, threaded
M6, threaded
Plug-In Stud
9 ACTUATOR COLOR
LEGEND
ON-OFF
White
B
Black
D
Red
G
Green
J
Blue
L
Yellow
N
Gray
Q
Orange
S
4 CIRCUIT
P
8
Terminal
8 TERMINAL2
1 SERIES
C
A
S
T
7
Current Rating
9223 225.000
8253 250.000
12 AGENCY APPROVAL
UL489A Listed (up to 250 amps)
T
UL489A Listed, VDE Certified (up to 200 amps)
K
UL489A Listed, TUV Certified (up to 250 amps)
7
Actuator Code:
A: Handle tie pin spacer(s) and retainers provided assembled with multi-pole units.
S: Handle moves to mid-position only upon electrical trip of the breaker.
T: Handle moves to mid-position and alarm switch activates only upon electrical trip of
the breaker.
Terminal Code:
3 & 6: Supplied with bus bars connecting the Line and Load Terminals.
A: Line and Load Terminals must be connected to a copper bus bar having a minimum
cross section of 0.078 square inches.
Above 200 amps, 3 poles are required.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com
11
12
Max. App. Agency
Rating
Approval
C-Series Handle UL489 Listed – Ordering Scheme | 9
C A 3 — B 0 — 14 — 450 — 1 2 1 — K G
1
Series
2
Actuator
4
Circuit
3
Poles
5
Aux/Alarm
Switch
6
Frequency
& Delay
A
B
S
T
CODE
1
Handle, one per pole
Handle, one per multipole unit
Mid-Trip Handle, one per pole
Mid-Trip, one per pole & Alarm Switch
3 POLES2
1
2
One
3
Two
Three
4 CIRCUIT
B
Series Trip (current)
5 AUXILIARY/ALARM SWITCH3
0
2
3
4
w/o Aux Switch
S.P.D.T., 0.110 Q.C. Term.
S.P.D.T., 0.139 Solder Lug
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
6 FREQUENCY & DELAY
11
12
14
16
21
22
24
Notes:
1
2
3
4
5
6
7
8
9
10
11
12
8
Terminal
9
Actuator
Color
10
Mounting/
Barriers
11
Max. App.
Rating
12Agency
Approval
7 CURRENT RATING (AMPERES) 5
1 SERIES
C
2 ACTUATOR
7
Current Rating
DC Ultra Short
DC Short
DC Medium
DC Long
50/60Hz Ultra Short
50/60Hz Short
50/60Hz Medium
5
8
9
S.P.S.T., 0.110 Q.C. Term.
(Gold Contacts)
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.110 Q.C. Term.
(Gold Contacts)
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
26
424
444
464
524
544
564
50/60Hz Long
50/60Hz Short, Hi-Inrush
50/60Hz Medium, Hi-Inrush
50/60Hz Long, Hi-Inrush
DC Short, Hi-Inrush
DC Medium, Hi-Inrush
DC Long, Hi-Inrush
6
7
Actuator Code:
A: Handle tie pin spacer(s) and retainers provided assembled with multi-pole units.
B: Handle located, as viewed from front of breaker in left pole. 2 pole maximum.
S: Handle moves to mid-position only upon electrical trip of the breaker.
T: Handle moves to mid-position and alarm switch activates only upon electrical trip of
the breaker.
Standard multipole units have all poles identical except when specifying auxiliary switch
and/or mixed poles.
2 & 3 pole circuit breakers required for 120/240 VAC (Maximum application rating code
C) applications, have all poles identical except when specifying auxiliary / alarm switch
which is normally supplied in extreme right pole per figure B. Terminal barriers are
required on all multipole breakers.
Third pole is for 120/240 VAC applications requiring neutral disconnect. The 3rd pole has
the same construction as poles 1 & 2.
On multi-pole breakers, one auxiliary. switch is supplied, mounted in the extreme right
pole.
VDE approval on auxiliary switch codes 2, 3 & 4 only.
Auxiliary / Alarm Switch with Independent Circuit ie: separate from breaker circuit,
only available with circuit breakers rated 50 amp maximum at 80 VDC, 125 VDC, and
120 VAC. Auxiliary / Alarm Switch with Dependent Circuit ie: same as circuit breaker,
is supplied from factory with common terminal of auxiliary / alarm switch connected to
line terminal on 120/240 and 240 VAC ratings. Circuit breakers rated 120 VAC 50 amp
maximum can be supplied with Auxiliary/Alarm switch common terminal connected to
breaker line terminal. Consult factory for special catalog number.
Available up to 50 amps maximum.
Current ratings 71 - 100 with VDE approvals are available up to two poles maximum.
Terminal Codes 8, 9 & C are not VDE approved.
Terminal Code 1 available to 60 amps maximum.
Terminal Codes 2, 4, 5 & C available to 50 amps maximum.
Terminal Codes 3, 6 & 9 available to 100 amps maximum.
Terminal Code A available to 100 amps maximum.
VDE and TUV approvals require Dual (I-O, ON-OFF) markings on all handles.
Barriers supplied on multi-pole units only.
210
215
220
225
230
235
240
245
250
255
260
265
270
275
280
285
290
AMPERES
0.100
0.150
0.200
0.250
0.300
0.350
0.400
0.450
0.500
0.550
0.600
0.650
0.700
0.750
0.800
0.850
0.900
295
410
512
415
517
420
522
425
527
430
435
440
445
450
455
460
465
470 7.000
475 7.500
480 8.000
485 8.500
490 9.000
495 9.500
610 10.000
710 10.500
611 11.000
711 11.500
612 12.000
712 12.500
613 13.000
614 14.000
615 15.000
616 16.000
617 17.000
0.950
1.000
1.250
1.500
1.750
2.000
2.250
2.500
2.750
3.000
3.500
4.000
4.500
5.000
5.500
6.000
6.500
8 TERMINAL6
17
28
39
48
58
69
8
99
A10
C
Stud 10-32, threaded
Screw 10-32
Screw 1/4-20, threaded
Screw M5 x 0.8, threaded
Screw M5 x 0.8
9 ACTUATOR COLOR & LEGEND11
Actuator Color
ON-OFF
Dual
White
B
1
Black
D
2
Red
G
3
Green
J
4
Blue
L
5
Yellow
N
6
Gray
Q
7
Orange
S
8
10 MOUNTING/BARRIERS
MOUNTING STYLE
Threaded Insert
1
6-32 x 0.195 inches
2
ISO M3 x 5mm
618
620
622
624
625
630
635
640
660
670
680
685
690
695
810
Screw M6, threaded
1/4” Clip Terminal
7/16” Clip Terminal
Plug-In Stud
5/16” Clip Terminal
Legend Color
Black
White
White
White
White
Black
Black
Black
BARRIERS12
yes
yes
11 MAXIMUM APPLICATION RATING
A
65 DC
B
125 DC
C
120/240 AC2
D
240 AC
K
120 AC
M
80 DC
12 AGENCY APPROVAL11
w/o approvals
A
UL489 Listed, VDE Certified, CSA Accepted
F
UL489 Listed, CSA Accepted
G
UL489 Listed, TUV Certified, CSA Accepted
J
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com
18.000
20.000
22.000
24.000
25.000
30.000
35.000
40.000
60.000
70.000
80.000
85.000
90.000
95.000
100.000
10 | C-Series Sealed Toggle UL Recognized – Ordering Scheme
C M 3 — B 0 — 10 — 450 — 1 0 1 — C
1
Series
2
Actuator
4
Circuit
3
Poles
5
Aux/Alarm
Switch
6
Frequency
& Delay
M
1
Sealed Toggle, one per pole
3 POLES
1
2
One
Relay Trip (current)
Relay Trip (voltage)
Dual Coil with Shunt Trip
Voltage Coil
Dual Coil with Relay Trip
Voltage Coil
5 AUXILIARY/ALARM SWITCH
5
8
9
S.P.S.T., 0.110 Q.C. Term.
(Gold Contacts)
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.110 Q.C. Term.
(Gold Contacts)
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
30
31
32
34
36
427
447
467
527
547
56
DC 50/60Hz Instantaneous
DC 50/60Hz Ultra Short
DC 50/60Hz Short
DC 50/60Hz Medium
DC 50/60Hz Long
50/60Hz Short, Hi-Inrush
50/60Hz Medium, Hi-Inrush
50/60Hz Long, Hi-Inrush
DC Short, Hi-Inrush
DC Medium, Hi-Inrush
DC Long, Hi-Inrush
Switch Only (no coil)
Series Trip (current)
Series Trip (voltage)
Shunt Trip (current)
Shunt Trip (voltage)
w/o Aux Switch
S.P.D.T., 0.110 Q.C. Term.
S.P.D.T., 0.139 Solder Lug
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
6 FREQUENCY & DELAY
032
106
11
12
14
16
206
21
22
24
26
Notes:
1
3
4
5
6
7
8
9
10
11
12
13
Three
F3
G3
H3,4
K3,4
0
2
3
4
2
3
Two
4 CIRCUIT
A2
B
C
D3
E3
8
Terminal
9
Legend
Plate
10
Mounting
Bezel/Barrier
11
Agency
Approval
7 CURRENT RATING (AMPERES) 9
1 SERIES
C
2 ACTUATOR
7
Current Rating
DC 50/60Hz, Switch Only
DC Instantaneous
DC Ultra Short
DC Short
DC Medium
DC Long
50/60Hz Instantaneous
50/60Hz Ultra Short
50/60Hz Short
50/60Hz Medium
50/60Hz Long
6
7
Actuator Code M: Handle location as viewed from front of breaker:
2 pole - right pole
3 pole - center pole
Switch Only circuits, rated up to 50 amps and 3 poles, and only available with VDE. For
.02 to 30 amps, select Current Code 630. For 35 - 50 amps, select Current Code 650.
For 55-70 amps, select Current Code 670. For 75-100 amps, select Current Code 810.
Circuit Codes D,E,F,G,H & K available with Terminal Codes 1,2,4 & 5 only.
Consult factory for available Dual Coil options, as special catalog number is required.
Dual Coil Voltage Coils with Shunt Trip Construction trip instantaneously on line voltage.
Dual Coil Voltage Coils require 30VA minimum power to trip instantaneously and are
rated for intermittent duty only.
Auxiliary Switch available with Series Trip and Switch Only circuits. On multi-pole breakers, one aux. switch is supplied, mounted in the extreme right pole.
Voltage coils not rated for continuous duty. Available only with delay codes 10 and 20.
Available with Circuit Codes B & D only, and up to 50 amps maximum.
Consult factory for current ratings 71-100, in three pole units, available as special
catalog number only.
Terminal Code 1 available to 60 amps maximum.
Terminal Codes 2,4,5 and C available to 50 amps maximum.
Terminal Codes 3,6 & 9 available to 100 amps maximum.
Terminal Code 7 available to 25 amps maximum.
Terminal Code A available to 100 amps maximum.
CODE
AMPERES
CODE
RATING
020 0.020
235 0.350
430 3.000
025 0.025
240 0.400
435 3.500
030 0.030
245 0.450
440 4.000
035 0.035
250 0.500
445 4.500
040 0.040
255 0.550
450 5.000
045 0.045
260 0.600
455 5.500
050 0.050
265 0.650
460 6.000
055 0.055
270 0.700
465 6.500
060 0.060
275 0.750
470 7.000
065 0.065
280 0.800
475 7.500
070 0.070
285 0.850
480 8.000
075 0.075
290 0.900
485 8.500
080 0.080
295 0.950
490 9.000
085 0.085
410 1.000
495 9.500
090 0.090
512 1.250
610 10.000
095 0.095
415 1.500
710 10.500
210 0.100
517 1.750
611 11.000
215 0.150
420 2.000
711 11.500
220 0.200
522 2.250
612 12.000
225 0.250
425 2.500
712 12.500
230 0.300
527 2.750
613 13.000
VOLTAGE COIL (NORMINAL RATED VOLTAGE)7
614
615
616
617
618
620
622
624
625
630
635
640
650
6609
6709
6809
6859
6909
6959
8109
A06 6DC
A12 12DC
A18 18DC
A24 24DC
J65 65AC
K20 120AC
L40 240AC
8 TERMINAL
19
210
311
410
510
A32
A48
A65
J06
32DC
48DC
65DC
6AC
Stud 10-32, threaded
Screw 10-32
Screw 1/4-20, threaded
Screw M5 x 0.8, threaded
Screw M5 x 0.8
J12
J18
J24
J48
611
712
8
911
A13
C10
12AC
18AC
24AC
48AC
Screw M6, threaded
0.250 Double Click Connect
1/4” Clip Terminal
7/16” Clip Terminal
Plug-In Stud
5/16” Clip Terminal
9 LEGEND PLATE
0
No Legend
10 MOUNTING/BARRIERS
MOUNTING STYLE
Standard Hex Nut
Standard Hex Nut (multi-pole units only)
1
A
14.000
15.000
16.000
17.000
18.000
20.000
22.000
24.000
25.000
30.000
35.000
40.000
50.000
60.000
70.000
80.000
85.000
90.000
95.000
100.000
BARRIERS
no
yes
11 AGENCY APPROVAL
UL Recognized, CSA Accepted
C
UL Recognized, CSA Accepted with listed construction
L
UL Recognized, CSA Accepted, UL1500 ignition protection
I
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com
C-Series Rocker UL Recognized – Ordering Scheme | 11
C C 3 — B 0 — 14 — 450 — 1 2 1 — D
1
Series
2
Actuator
4
Circuit
3
Poles
5
Aux/Alarm
Switch
6
Frequency
& Delay
1 SERIES
C
Single color
J
Vertical legend
K
Horizontal legend
L
No legend
Push-To-Reset, Single color
R
Vertical legend
U
Horizontal legend
V
No legend
Two Color Visi-Rocker
C
Indicate ON, vertical legend
D
Indicate ON, horizontal legend
E
Indicate ON, no legend
F
Indicate OFF, vertical legend
G
Indicate OFF, horizontal legend
H
Indicate OFF, no legend
Push-To-Reset, Visi-Rocker
N
Indicate OFF,
vertical legend
O
Indicate OFF,
horizontal legend
P
Indicate OFF,
no legend
3 POLES2
2
One
4 CIRCUIT
A3
B
C
D4
E4
Switch Only (No Coil)
Series Trip (Current)
Series Trip (Voltage)
Shunt Trip (Current)
Shunt Trip (Voltage)
5 AUXILIARY/ALARM SWITCH6
0
2
3
4
w/o Aux Switch
S.P.D.T., 0.110 Q.C. Term.
S.P.D.T., 0.139 Solder Lug
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
6 FREQUENCY & DELAY
03
107
11
12
14
16
207
21
22
24
26
9
Actuator
Color
10
Mounting/
Barriers
11
Agency
Approval
7 CURRENT RATING (AMPERES)
2 ACTUATOR1
1
8
Terminal
7
Current Rating
DC 50/60Hz, Switch Only
DC Instantaneous
DC Ultra Short
DC Short
DC Medium
DC Long
50/60Hz Instantaneous
50/60Hz Ultra Short
50/60Hz Short
50/60Hz Medium
50/60Hz Long
3
Two
F4
G4
H4,5
K4,5
5
Three
Relay Trip (Current)
Relay Trip (Voltage)
Dual Coil with Shunt Trip Voltage Coil
Dual Coil with Relay Trip Voltage Coil
8
9
S.P.S.T., 0.110 Q.C. Term.
(Gold Contacts)
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.110 Q.C. Term.
(Gold Contacts)
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
30
31
32
34
36
428
448
468
528
548
568
DC 50/60Hz Instantaneous
DC 50/60Hz Ultra Short
DC 50/60Hz Short
DC 50/60Hz Medium
DC 50/60Hz Long
50/60Hz Short, Hi-Inrush
50/60Hz Medium, Hi-Inrush
50/60Hz Long, Hi-Inrush
DC Short, Hi-Inrush
DC Medium, Hi-Inrush
DC Long, Hi-Inrush
6
7
Notes:
1
Push-To-Reset actuators have OFF portion of rocker shrouded.
2
Multi-pole breakers have all poles identical except when specifying Aux. switch and/or mixed poles, and have one
rocker per breaker. Rocker location as viewed from front panel: 2 pole – left pole; 3 pole – center pole.
3
Switch Only circuits, rated up to 50 amps and 3 poles, and only available with VDE Certification when tied to a
protected pole (Circuit Code B, C, D or H.), For .02 to 30 amps, select Current Code 630. For 35 - 50 amps, select
Current Code 650. For 55-70 amps, select Current Code 670. For 75-100 amps, select Current Code 810.
4
Circuit Codes D,E,F,G,H & K available with Terminal Codes 1,2,4 & 5 only. Circuit Codes D,F,H & K available up
to 50 amps maximum Current Rating.
5
Consult factory for available Dual Coil options, as special catalog number is required. Dual Coil Voltage Coils
with Shunt Trip Construction trip instantaneously on line voltage. Dual Coil Voltage Coils require 30VA minimum
power to trip instantaneously and are rated for intermittent duty only.
Auxiliary Switch available with Series Trip and Switch Only circuits. On multi-pole breakers, one aux. switch is
6
supplied, mounted in the extreme right pole.Auxilary switch codes 2,3 & 4 are VDE approved.
7
Voltage coils not rated for continuous duty. Available only with delay codes 10 and 20.
8
Available with Circuit Codes B & D only, and up to 50 amps maximum.
9
Current Ratings 60-70 are available up to four poles maximum. Ratings 71-100 are available up to two poles maximum.
10
Terminal Code 1 available to 60 amps maximum.
11
Terminal Codes 2,4,5 & C available to 50 amps maximum.
12
Terminal Codes 3,6 & 9 available to 100 amps maximum.
13
Terminal Code 7 available to 25 amps maximum.
14
Terminal Code A available to 100 amps maximum.
15
Terminal Codes 7,8,9 & C are not VDE approved.
16
Color shown is visi and legend with remainder of rocker black
17
Legend on Push-to-reset bezel/shroud is white when single color rocker is ordered. Dual = ON-OFF/I-O legend
with actuator codes C - G, and J, K, N, O, R, & U. None = no legend with actuator codes H, L, P, V. Rockerguard available with actuator codes C - L. Push-to-reset available witha ctuator codes N, O, P, R, U, V.
18
VDE/TUV approval requires Dual (I-O, ON-OFF) or I-O markings on rocker.
19
VDE/TUV: 30 amps max.; UL/CSA: 50 amps max.; Available in 2 - 4 poles only and limited to AC Delays.
“General Purpose amps” not rated for “full load amps” or to be used in applications with a motor.
CODE
AMPERES
CODE
RATING
020 0.020
235 0.350
430 3.000
025 0.025
240 0.400
435 3.500
030 0.030
245 0.450
440 4.000
035 0.035
250 0.500
445 4.500
040 0.040
255 0.550
450 5.000
045 0.045
260 0.600
455 5.500
050 0.050
265 0.650
460 6.000
055 0.055
270 0.700
465 6.500
060 0.060
275 0.750
470 7.000
065 0.065
280 0.800
475 7.500
070 0.070
285 0.850
480 8.000
075 0.075
290 0.900
485 8.500
080 0.080
295 0.950
490 9.000
085 0.085
410 1.000
495 9.500
090 0.090
512 1.250
610 10.000
095 0.095
415 1.500
710 10.500
210 0.100
517 1.750
611 11.000
215 0.150
420 2.000
711 11.500
220 0.200
522 2.250
612 12.000
225 0.250
425 2.500
712 12.500
230 0.300
527 2.750
613 13.000
VOLTAGE COIL (NORMINAL RATED VOLTAGE)7
614
615
616
617
618
620
622
624
625
630
635
640
650
6609
6709
6809
6859
6909
6959
8109
A06 6DC
A12 12DC
A18 18DC
A24 24DC
J65 65AC
K20 120AC
L40 240AC
A32
A48
A65
J06
32DC
48DC
65DC
6AC
8 TERMINAL
110
211
312
411
511
612
713
8
9
A14
C
Stud 10-32, threaded
Screw 10-32
Stud 1/4-20, threaded
Stud M5 x 0.8, threaded
Screw M5 x 0.8
Stud M6, threaded
9 ACTUATOR COLOR & LEGEND16,17,18
Actuator or
Visi-Color Marking:
Color:
White
Black
Red
Green
Blue
Yellow
Gray
Orange
I-O
A
C
F
H
K
M
P
R
ON-OFF
B
D
G
J
L
N
Q
S
J12
J18
J24
J48
Dual/None
1
2
3
4
5
6
7
8
10 MOUNTING/BARRIERS1
Standard Rocker Bezel
6-32 x 0.195 inches
1
6-32 x 0.195 inches
2
19
6-32 x 0.195 inches
3
ISO M3 x 5mm
4
ISO M3 x 5mm
5
19
ISO M3 x 5mm
6
Rockerguard Bezel
6-32 x 0.195 inches
A
6-32 x 0.195 inches
C
19
6-32 x 0.195 inches
E
ISO M3 x 5mm
G
ISO M3 x 5mm
J
19
ISO M3 x 5mm
L
Push-To-Reset Bezel
6-32 x 0.195 inches
B
6-32 x 0.195 inches
D
19
6-32 x 0.195 inches
F
ISO M3 x 5mm
H
ISO M3 x 5mm
J
19
ISO M3 x 5mm
M
12AC
18AC
24AC
48AC
14.000
15.000
16.000
17.000
18.000
20.000
22.000
24.000
25.000
30.000
35.000
40.000
50.000
60.000
70.000
80.000
85.000
90.000
95.000
100.000
0.250 Double Quick Connect
1/4” Clip Terminal
7/16” Clip Terminal
Plug-In Stud
5/16” Clip Terminal
Marking Color:
Single Color
Rocker/Handle
Black
White
White
White
White
Black
Black
Black
Visi-Rocker
White
n/a
Red
Green
Blue
Yellow
Gray
Orange
BARRIERS
no
yes
yes
no
yes
yes
no
yes
yes
no
yes
yes
no
yes
yes
no
yes
yes
11 AGENCY APPROVAL
C
UL Recognized, CSA Accepted
D
VDE Certified, UL Recognized, CSA Accepted
E
TUV Certified, UL Recognized, CSA Accepted
H
UL489 Construction: VDE Certified, UL Recognized, CSA Accepted
I
UL Rec. STD 1077, UL Rec. 1500 (ignition protected), CSA Accepted
L
UL489 Construction: UL Recognized, CSA Accepted
R
UL489 Construction: TUV Certified, UL Recognized, CSA Accepted
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com
12 | C-Series Handle UL Listed – Ordering Scheme
C C 3 — B 0 — 14 — 450 — 1 2 A — K G
1
Series
2
Actuator
4
Circuit
3
Poles
5
Aux/Alarm
Switch
6
Frequency
& Delay
CODE
2 ACTUATOR1
Two Color Visi-Rocker
C
Indicate ON, vertical legend
D
Indicate ON, horizontal legend
F
Indicate OFF, vertical legend
G
Indicate OFF, horizontal legend
Single color
J
Vertical legend
K
Horizontal legend
ROCKER STYLE DESCRIPTIONS
INDICATE "ON"
INDICATE "OFF"
SINGLE COLOR
CODE "F"
CODE "J"
CODE "C"
INDICATE
COLOR
LOCATION
LINE
CODE "D"
HORIZONTAL
STYLE
VERTICAL
STYLE
LINE
LINE
LINE
CODE "G"
LINE
CODE "K"
2
One
3
Two
Three
Series Trip (current)
5 AUXILIARY/ALARM SWITCH2
w/o Aux Switch
S.P.D.T., 0.110 Q.C. Term.
S.P.D.T., 0.139 Solder Lug
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
6 FREQUENCY & DELAY
11
12
14
16
21
22
24
Notes:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
9
Actuator
Color
DC Ultra Short
DC Short
DC Medium
DC Long
50/60Hz Ultra Short
50/60Hz Short
50/60Hz Medium
5
8
9
S.P.S.T., 0.110 Q.C. Term.
(Gold Contacts)
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.110 Q.C. Term.
(Gold Contacts)
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
26
428
448
468
528
548
56
50/60Hz Long
50/60Hz Short, Hi-Inrush
50/60Hz Medium, Hi-Inrush
50/60Hz Long, Hi-Inrush
DC Short, Hi-Inrush
DC Medium, Hi-Inrush
DC Long, Hi-Inrush
6
7
AMPERES
0.100
0.150
0.200
0.250
0.300
0.350
0.400
0.450
0.500
0.550
0.600
0.650
0.700
0.750
0.800
0.850
0.900
295
410
512
415
517
420
522
425
527
430
435
440
445
450
455
460
465
10
Mounting/
Barriers
11
Max. App.
Rating
470 7.000
475 7.500
480 8.000
485 8.500
490 9.000
495 9.500
610 10.000
710 10.500
611 11.000
711 11.500
612 12.000
712 12.500
613 13.000
614 14.000
615 15.000
616 16.000
617 17.000
0.950
1.000
1.250
1.500
1.750
2.000
2.250
2.500
2.750
3.000
3.500
4.000
4.500
5.000
5.500
6.000
6.500
8 TERMINAL
LINE
4 CIRCUIT
0
2
3
4
210
215
220
225
230
235
240
245
250
255
260
265
270
275
280
285
290
15
26
3 POLES1
B
8
Terminal
12
Agency
Approval
7 CURRENT RATING (AMPERES) 4
1 SERIES
C
1
7
Current Rating
Multi-pole breakers have all breakers identical except when specifying Aux. switch and/
or mixed poles, and have one rocker per breaker.
On multi-pole breakers, one aux. switch is supplied, mounted in the extreme right pole.
Available up to 50 amps maximum.
Current ratings 71 - 100 with VDE approvals are available up to two poles maximum.
Terminal Code 1 available to 60 amps maximum.
Terminal Codes 2, 4, 5 & C available to 50 amps maximum.
Terminal Codes 3, 6, 9 & A available to 100 amps maximum.
Terminal Codes 8, 9 & C are not VDE approved.
Color shown is visi and legend with remainder of rocker black
Dual = ON-OFF/I-O legend on actuator.
VDE and TUV approval requires Dual (I-O, ON-OFF) markings on rocker.
Rockerguard available with all actuator codes.
Barriers supplied on multi-pole units only.
2 & 3 pole circuit breakers required for 120/240 AC rating.
37
46
56
67
88
97,8
A7,8
C6,8
Stud 10-32, threaded
Screw 8-32 w/saddle &
washer clamps
Stud 1/4-20, threaded
Stud M5 x 0.8, threaded
Screw M5 x 0.8 w/saddle &
washer clamps
9 ACTUATOR COLOR & LEGEND11
Actuator or
Visi-Color 9 Marking:
Color:
White
Black
Red
Green
Blue
Yellow
Gray
Orange
ON-OFF
B
D
G
J
L
N
Q
S
Dual
1
2
3
4
5
6
7
8
10
10 MOUNTING/BARRIERS12
Standard Rocker Bezel
Threaded Insert, 2 per pole
A
6-32 x 0.195 inches
C
ISO M3 x 5mm
Rockerguard Bezel
Threaded Insert, 2 per pole
B
6-32 x 0.195 inches
D
ISO M3 x 5mm
618 18.000
620 20.000
622 22.000
624 24.000
625 25.000
630 30.000
635 35.000
640 40.000
650 50.000
660 60.000
670 70.000
680 80.000
685 85.000
690 90.000
695 95.000
100 100.000
Stud M6, threaded
1/4” Clip Terminal
7/16” Clip Terminal
Plug-In Stud
5/16” Clip Terminal
Marking Color:
Single Color
Rocker/Handle
Black
White
White
White
White
Black
Black
Black
Visi-Rocker
White
n/a
Red
Green
Blue
Yellow
Gray
Orange
BARRIERS13
yes
yes
yes
yes
11 MAXIMUM APPLICATION RATING
A
65 DC
B
125 DC
C
120/240 AC14
D
240 AC
K
120 AC
M
80 DC
12 AGENCY APPROVAL
without approvals
A
UL 489 Listed, CSA Certified, & VDE Certified
F
UL 489 Listed & CSA Certified
G
UL489 Listed, CSA Certified & TUV Certified
J
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com
C-Series Flat Rocker UL Recognized – Ordering Scheme | 13
C 1 2 — B 0 — 10 — 450 — 1 2 1 — E
1
Series
2
Actuator
4
Circuit
3
Poles
5
Aux/Alarm
Switch
6
Frequency
& Delay
1 SERIES
C
Two Color Visi-Rocker
1
Indicate OFF, vertical legend
2
Indicate OFF, horizontal legend
Single color
3
Vertical legend
4
Horizontal legend
Push-To-Reset, Visi-Rocker
5
Indicate OFF, vertical legend
6
Indicate OFF, horizontal legend
Push-To-Reset , Single color
7
Vertical legend
8
Horizontal legend
3 POLES2
2
One
B
C
D4
E4
0
2
3
4
w/o Aux Switch
S.P.D.T., 0.110 Q.C. Term.
S.P.D.T., 0.139 Solder Lug
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
6 FREQUENCY & DELAY
03
107
11
12
14
16
207
21
22
24
26
F4
G4
H4,5
Switch Only (No Coil)
Series Trip (Current)
Series Trip (Voltage)
Shunt Trip (Current)
Shunt Trip (Voltage)
5 AUXILIARY/ALARM SWITCH
DC 50/60Hz, Switch Only
DC Instantaneous
DC Ultra Short
DC Short
DC Medium
DC Long
50/60Hz Instantaneous
50/60Hz Ultra Short
50/60Hz Short
50/60Hz Medium
50/60Hz Long
3
Two
4 CIRCUIT
A3
9
Actuator
Color
10
Mounting/
Barriers
11
Agency
Approval
7 CURRENT RATING (AMPERES) 9
2 ACTUATOR1
1
8
Terminal
7
Current Rating
K4,5
6
5
Three
Relay Trip (Current)
Relay Trip (Voltage)
Dual Coil with Shunt Trip Voltage Coil
Dual Coil with Relay Trip Voltage Coil
8
9
S.P.S.T., 0.110 Q.C. Term.
(Gold Contacts)
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.110 Q.C. Term.
(Gold Contacts)
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
30
31
32
34
36
428
448
468
528
548
568
DC 50/60Hz Instantaneous
DC 50/60Hz Ultra Short
DC 50/60Hz Short
DC 50/60Hz Medium
DC 50/60Hz Long
50/60Hz Short, Hi-Inrush
50/60Hz Medium, Hi-Inrush
50/60Hz Long, Hi-Inrush
DC Short, Hi-Inrush
DC Medium, Hi-Inrush
DC Long, Hi-Inrush
6
7
Notes:
1
Push-to-reset actuators have OFF portion of rocker shrouded.
2
Multi-pole breakers have all poles identical except when specifying Aux. switch and/or mixed poles, and have
one rocker per breaker. Rocker location as viewed from front panel: 2 pole – left pole; 3 pole – center pole.
3
Switch Only circuits, rated up to 50 amps and 3 poles, and only available with VDE Certification when tied to a
protected pole (Circuit Code B, C, D or H.). For .02 to 30 amps, select Current Code 630. For 35 - 50 amps,
select Current Code 650. For 55-70 amps, select Current Code 670. For 75-100 amps, select Current Code 810.
4
Circuit Codes D,E,F,G,H & K available with Terminal Codes 1,2,4 & 5 only. Circuit Codes D,F,H & K available up
to 50 amps maximum Current Rating.
5
Consult factory for available Dual Coil options, as special catalog number is required. Dual Coil Voltage Coils
with Shunt Trip Construction trip instantaneously on line voltage. Dual Coil Voltage Coils require 30VA minimum
power to trip instantaneously and are rated for intermittent duty only.
6
Auxiliary Switch available with Series Trip and Switch Only circuits. On multi-pole breakers, one aux. switch is
supplied, mounted in the extreme right pole.Auxilary switch codes 2,3 & 4 are VDE approved.
7
Voltage coils not rated for continuous duty. Available only with delay codes 10 and 20.
8
Available with Circuit Codes B & D only, and up to 50 amps maximum.
9
Current ratings 60-70 are available up to four poles maximum. Current ratings 71 - 100 are available up to two
poles maximum.
10
Terminal Code 1 available to 60 amps maximum.
11
Terminal Codes 2,4,5 & C available to 50 amps maximum.
12
Terminal Codes 3,6 & 9 available to 100 amps maximum.
13
Terminal Code 7 available to 25 amps maximum.
14
Terminal Code A available to 100 amps maximum.
15
Terminal Codes 7,8,9 & C are not VDE approved.
16
Color shown is visi & legend with remainder of rocker black. Dual = ON-OFF/I-O legend.
17
Legend on Push-to-reset bezel/shroud is white with single color actuator codes 7 & 8. Legend on Push-to-reset
bezel/shroud matches visi-color of rocker with actuator codes 5 & 6.
18
VDE/TUV approval requires Dual (I-O, ON-OFF) or I-O markings on rocker.
19
VDE/TUV: 30 amps max.; UL/CSA: 50 amps max.; Available in 2 & 3 poles only and limited to AC Delays.
“General Purpose amps” not rated for “full load amps” or to be used in applications with a motor.
20
Recessed “OFF SIDE” available with actuator codes 1,2,3&4. Legends on rocker are available in ink stamping only.
CODE
AMPERES
CODE
RATING
020 0.020
235 0.350
430 3.000
025 0.025
240 0.400
435 3.500
030 0.030
245 0.450
440 4.000
035 0.035
250 0.500
445 4.500
040 0.040
255 0.550
450 5.000
045 0.045
260 0.600
455 5.500
050 0.050
265 0.650
460 6.000
055 0.055
270 0.700
465 6.500
060 0.060
275 0.750
470 7.000
065 0.065
280 0.800
475 7.500
070 0.070
285 0.850
480 8.000
075 0.075
290 0.900
485 8.500
080 0.080
295 0.950
490 9.000
085 0.085
410 1.000
495 9.500
090 0.090
512 1.250
610 10.000
095 0.095
415 1.500
710 10.500
210 0.100
517 1.750
611 11.000
215 0.150
420 2.000
711 11.500
220 0.200
522 2.250
612 12.000
225 0.250
425 2.500
712 12.500
230 0.300
527 2.750
613 13.000
VOLTAGE COIL (NORMINAL RATED VOLTAGE)7
614
615
616
617
618
620
622
624
625
630
635
640
650
6609
6709
6809
6859
6909
6959
8109
A06 6DC
A12 12DC
A18 18DC
A24 24DC
J65 65AC
K20 120AC
L40 240AC
A32
A48
A65
J06
J12
J18
J24
J48
32DC
48DC
65DC
6AC
8 TERMINAL
110
211
312
411
511
612
713
8
9
A14
C
Stud 10-32, threaded
Screw 10-32
Stud 1/4-20, threaded
Stud M5 x 0.8, threaded
Screw M5 x 0.8
9 ACTUATOR COLOR & LEGEND16,17,18
Actuator or
Visi-Color Marking:
Color:
White
Black
Red
Green
Blue
Yellow
Gray
Orange
I-O
A
C
F
H
K
M
P
R
ON-OFF
B
D
G
J
L
N
Q
S
Dual/None
1
2
3
4
5
6
7
8
10 MOUNTING/BARRIERS1`
Standard Rocker Bezel
6-32 x 0.195 inches
1
6-32 x 0.195 inches
2
6-32 x 0.195 inches
319
ISO M3 x 5mm
4
ISO M3 x 5mm
5
19
ISO M3 x 5mm
6
Rockerguard Bezel
6-32 x 0.195 inches
7
6-32 x 0.195 inches
8
6-32 x 0.195 inches
9
ISO M3 x 5mm
A
ISO M3 x 5mm
C
ISO M3 x 5mm
E
Push-To-Reset Bezel
6-32 x 0.195 inches
B
6-32 x 0.195 inches
D
6-32 x 0.195 inches
F19
ISO M3 x 5mm
H
ISO M3 x 5mm
J
19
ISO M3 x 5mm
M
12AC
18AC
24AC
48AC
14.000
15.000
16.000
17.000
18.000
20.000
22.000
24.000
25.000
30.000
35.000
40.000
50.000
60.000
70.000
80.000
85.000
90.000
95.000
100.000
Stud M6, threaded
0.250 Double Quick Connect
1/4” Clip Terminal
7/16” Clip Terminal
Plug-In Stud
5/16” Clip Terminal
Marking Color:
Single Color
Rocker/Handle
Black
White
White
White
White
Black
Black
Black
Visi-Rocker
White
n/a
Red
Green
Blue
Yellow
Gray
Orange
BARRIERS
no
yes
yes
no
yes
yes
VOLTAGE
< 300
< 300
>
– 300
< 300
< 300
>
– 300
no
yes
yes
no
yes
yes
< 300
< 300
>
– 300
< 300
< 300
>
– 300
no
yes
yes
no
yes
yes
< 300
< 300
>
– 300
< 300
< 300
>
– 300
11 AGENCY APPROVAL
C
UL Recognized, CSA Accepted
E
TUV Certified, UL Recognized, CSA Accepted
I
UL Rec. STD 1077, UL Rec. 1500 (ignition protected), CSA Accepted
L
UL489 Construction: UL Recognized, CSA Accepted
R
UL489 Construction: TUV Certified, UL Recognized, CSA Accepted
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com
14 | C-Series Handle Flat Rocker UL Listed – Ordering Scheme
C 1 2 — B 0 — 14 — 450 — 1 2 A — K G
1
Series
2
Actuator
4
Circuit
3
Poles
5
Aux/Alarm
Switch
6
Frequency
& Delay
CODE
210
215
220
225
230
235
240
245
250
255
260
265
270
275
280
285
290
2 ACTUATOR1
Two Color Visi-Rocker
1
Indicate OFF, vertical legend
2
Indicate OFF, horizontal legend
Single color
3
Vertical legend
4
Horizontal legend
Push-To-Reset, Visi-Rocker
5
Indicate OFF, vertical legend
6
Indicate OFF, horizontal legend
Push-To-Reset , Single color
7
Vertical legend
8
Horizontal legend
3 POLES2
2
One
3
Two
Three
Series Trip (current)
5 AUXILIARY/ALARM SWITCH
0
2
3
4
w/o Aux Switch
S.P.D.T., 0.110 Q.C. Term.
S.P.D.T., 0.139 Solder Lug
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
6 FREQUENCY & DELAY
11
12
14
16
21
22
24
Notes:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
9
Actuator
Color
DC Ultra Short
DC Short
DC Medium
DC Long
50/60Hz Ultra Short
50/60Hz Short
50/60Hz Medium
2
5
6
7
8
9
26
424
444
464
524
544
564
S.P.S.T., 0.110 Q.C. Term.
(Gold Contacts)
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.110 Q.C. Term.
(Gold Contacts)
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
50/60Hz Long
50/60Hz Short, Hi-Inrush
50/60Hz Medium, Hi-Inrush
50/60Hz Long, Hi-Inrush
DC Short, Hi-Inrush
DC Medium, Hi-Inrush
DC Long, Hi-Inrush
Push-to-reset actuators have OFF portion of rocker shrouded.
Multi-pole breakers have all breakers identical except when specifying Aux. switch and/
or mixed poles, and have one rocker per breaker.
On multi-pole breakers, one aux. switch is supplied, mounted in the extreme right pole.
Available up to 50 amps maximum.
Current ratings 71 - 100 with VDE approvals are available up to two poles maximum.
Terminal Code 1 available to 60 amps maximum.
Terminal Codes 2, 4, 5 & C available to 50 amps maximum.
Terminal Codes 3, 6, 9 & A available to 100 amps maximum.
Terminal Codes 8, 9 & C are not VDE approved.
Color shown is visi and legend with remainder of rocker black
Dual = ON-OFF/I-O legend on actuator.
VDE and TUV approval requires Dual (I-O, ON-OFF) markings on rocker.
Legend on push-to-reset bezel/shroud is white when single color rocker is ordered.
Legend on push-to-reset bezel/shroud matches visi-color of rocker with actuator codes
5 & 6.
Recessed “OFF-SIDE” available with actuator codes 1, 2, 3, & 4. Legends on rocker are
available in ink stamping only.
Barriers supplied on multi-pole units only.
2 & 3 pole circuit breakers required for 120/240 AC rating.
AMPERES
0.100
0.150
0.200
0.250
0.300
0.350
0.400
0.450
0.500
0.550
0.600
0.650
0.700
0.750
0.800
0.850
0.900
295
410
512
415
517
420
522
425
527
430
435
440
445
450
455
460
465
10
Mounting/
Barriers
11
Max. App.
Rating
470 7.000
475 7.500
480 8.000
485 8.500
490 9.000
495 9.500
610 10.000
710 10.500
611 11.000
711 11.500
612 12.000
712 12.500
613 13.000
614 14.000
615 15.000
616 16.000
617 17.000
0.950
1.000
1.250
1.500
1.750
2.000
2.250
2.500
2.750
3.000
3.500
4.000
4.500
5.000
5.500
6.000
6.500
8 TERMINAL
16
27
4 CIRCUIT
B
8
Terminal
12
Agency
Approval
7 CURRENT RATING (AMPERES) 5
1 SERIES
C
1
7
Current Rating
38
47
57
Stud 10-32, threaded .625 long
Screw 8-32 w/saddle &
washer clamps
Stud 1/4-20, threaded .625 long
Stud M5 x 0.8, threaded .625 long
Screw M5 x 0.8 w/saddle &
washer clamps
9 ACTUATOR COLOR & LEGEND12
Actuator or
Visi-Color 9 Marking:
Color:
White
Black
Red
Green
Blue
Yellow
Gray
Orange
ON-OFF
B
D
G
J
L
N
Q
S
Dual
1
2
3
4
5
6
7
8
11
10 MOUNTING/BARRIERS12
Standard Rocker Bezel
Threaded Insert, 2 per pole
A
6-32 x 0.195 inches
C
ISO M3 x 5mm
Recessed Off Rocker14
Threaded Insert, 2 per pole
E
6-32 x 0.195 inches
F
ISO M3 x 5mm
Push-To-Reset Bezel
Threaded Insert, 2 per pole
B
6-32 x 0.195 inches
D
ISO M3 x 5mm
68
89
98,9
A8,9
C7,9
618 18.000
620 20.000
622 22.000
624 24.000
625 25.000
630 30.000
635 35.000
640 40.000
650 50.000
660 60.000
670 70.000
680 80.000
685 85.000
690 90.000
695 95.000
100 100.000
Stud M6, threaded 17mm long
1/4” Clip Terminal
7/16” Clip Terminal
Plug-In Stud
5/16” Clip Terminal
Marking Color:
Single Color
Rocker/Handle
Black
White
White
White
White
Black
Black
Black
Visi-Rocker
White
n/a
Red
Green
Blue
Yellow
Gray
Orange
BARRIERS15
yes
yes
yes
yes
yes
yes
11 MAXIMUM APPLICATION RATING
A
65 DC
B
125 DC
C
120/240 AC16
D
240 AC
K
120 AC
M
80 DC
12 AGENCY APPROVAL
without approvals
A
UL 489 Listed & CSA Certified
G
UL489 Listed, CSA Certified & TUV Certified
J
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com
C-Series Handle – Circuit & Terminal Diagrams | 15
LINE
LOAD
Notes:
1
2
3
All dimensions are in inches [millimeters].
Tolerance ±.020 [.51] unless otherwise specified.
Available on Series Trip and Switch Only Circuits when called for on multi-pole units.
Only one aux. switch is normally supplied, as viewed in mulit-pole identification scheme.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com
16 | C-Series Handle – Circuit & Terminal Diagrams
LINE
LOAD
Notes:
1
2
3
4
All dimensions are in inches [millimeters].
Tolerance ±.020 [.51] unless otherwise specified.
Schematic shown represents current trip circuits.
Available only as special catalog number.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com
C-Series Handle – Form & Fit Drawings | 17
LINE
LOAD
Notes:
1
2
All dimensions are in inches [millimeters].
Tolerance ±.020 [.51] unless otherwise specified.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com
18 | C-Series Handleguard – Form & Fit Drawings
LINE
LOAD
Notes:
1
2
All dimensions are in inches [millimeters].
Tolerance ±.020 [.51] unless otherwise specified.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com
C-Series Parellel Pole – Form & Fit Drawings | 19
LINE
LOAD
Notes:
1
2
All dimensions are in inches [millimeters].
Tolerance ±.020 [.51] unless otherwise specified.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com
20 | C-Series Sealed Toggle – Form & Fit Drawings
LINE
LOAD
Notes:
1
2
All dimensions are in inches [millimeters].
Tolerance ±.020 [.51] unless otherwise specified.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com
C-Series Rocker – Circuit & Terminal Diagrams | 21
LINE
LOAD
Notes:
1
2
3
All dimensions are in inches [millimeters].
Tolerance ±.020 [.51] unless otherwise specified.
Schematic shown represents current trip circuit.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com
22 | C-Series Rocker – Form & Fit Drawings
LINE
LOAD
Notes:
1
2
3
4
Dimensions apply to all variations shown. Notice that circuit breaker line and load terminal orientation on indicate OFF is opposite of indicate ON.
For pole orientation with horizontal legend, rotate front view clockwise 90°.
All dimensions are in inches [millimeters].
Tolerance ±.020 [.51] unless otherwise specified.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com
C-Series Flat Rocker – Form & Fit Drawings | 23
LINE
LOAD
Notes:
1
2
3
For pole orientation with horizontal legend, rotate front view clockwise 90°.
All dimensions are in inches [millimeters].
Tolerance ±.020 [.51] unless otherwise specified.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com
Worldwide Headquarters
Carling Technologies, Inc.
60 Johnson Avenue • Plainville, CT 06062-1177
Phone: (860) 793-9281 • Fax: (860) 793-9231
Email: [email protected] • www.carlingtech.com
East Region Sales Office, CT • [email protected]
Midwest Region Sales Office, IL • [email protected]
West Region Sales Office, CA • [email protected]
Asia-Pacific Headquarters
Carling Technologies, Asia-Pacific Ltd.,
Kowloon, Hong Kong
Int + 852-2737-2277 • Fax: Int + 852-2736-9332
Email: [email protected]
Shenzhen, China • [email protected]
Shanghai, China • [email protected]
Pune, India • [email protected]
Kaohsiung, Taiwan • [email protected]
Yokohama, Japan • [email protected]
Europe/Middle East/Africa Headquarters
Carling Technologies, Ltd.,
Devon, England 06062-1177
Int + 44 1392-364422 • Fax: Int + 44 1392-364477
Email: [email protected]
GmbH, Germany • [email protected]
SAS, France • [email protected]
REV_CB_C_0312