MARCH, 2015 GLASSventTM Windows for Storefront Framing EC 97911-074 INDEX PROJECT-OUT WINDOW.................................................................. 3-8 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. OUTSWING CASEMENT WINDOW................................................ 9-14 LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE, WINDOW, AND CURTAIN WALL PRODUCTS VARY WIDELY. KAWNEER DOES NOT CONTROL THE SELECTION OF PRODUCT CONFIGURATIONS, OPERATING HARDWARE, OR GLAZING MATERIALS, AND ASSUMES NO RESPONSIBILITY THEREFOR. Metric (SI) conversion figures are included throughout these details for reference. Numbers in parentheses ( ) are millimeters unless otherwise noted. © Kawneer Company, Inc., 2015 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 1 The following metric (SI) units are found in these details: m –meter cm – centimeter mm –millimeter s –second Pa –pascal MPa –megapascal Kawneer reserves the right to change configurations without prior notice when deemed necessary for product improvement. kawneer.com ADME070 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. GLASSventTM Windows for Storefront Framing MARCH, 2015 BLANK PAGE EC 97911-074 ADME070 kawneer.com © Kawneer Company, Inc., 2015 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 2 © Kawneer Company, Inc., 2015 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. MARCH, 2015 GLASSventTM Windows for Storefront Framing EC 97911-074 PROJECT-OUT WINDOW Features • • • • • Heavy Commercial Grade Window Tested to US Standards 45° Mitered Vent and Frame Corners Staked Corner Joinery Architectural Anodized Finishes and Applied Coatings Exterior For specific product applications, Consult your Kawneer representative. kawneer.com ADME070 Interior 3 GLASSventTM Windows for Storefront Framing MARCH, 2015 PROJECT-OUT WINDOW EC 97911-074 TESTING STANDARD AAMA / WDMA / CSA / 101 / I.S.2 / A440 (NAFS) SYSTEM DEPTH 2-3/4" Overall System Depth (1" Infill) 2-1/8" Overall System Depth (1/4" Infill) TYPICAL WALL THICKNESS 0.090 Nominal Frame TYPICAL MAX. VENT SIZE 60" x 36" TYPICAL MIN. VENT SIZE 14" x 14" INFILL OPTIONS 1" and 1/4" STANDARD HARDWARE Stainless Steel 4-Bar Hinges Cast White Bronze Cam Lock OPTIONAL HARDWARE Cam Lock with Pole Ring Sash Pole Pole Ring Access Control Lock Pivot-Shoe Roto-Operator Concealed Lock with removable key Hook Bolt Lock Limit Stop OTHER OPTIONS Insect Screens ADME070 kawneer.com © Kawneer Company, Inc., 2015 Heavy Commercial Grade P-HC40 – P-HC70 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. CLASS and GRADE Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 4 MARCH, 2015 GLASSventTM Windows for Storefront Framing EC 97911-074 PROJECT-OUT WINDOW (1" INFILL) 5 4 2-3/4" (69.9) TYP. 2 ELEVATION IS NUMBER KEYED TO DETAILS 2" (50.8) 1/8" (3.2) 2 SILL 4-1/2" (114.3) TYP. © Kawneer Company, Inc., 2015 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. OPENING DIMENSION 1/8" (3.2) UNIT DIMENSION 1-13/16" (46) 3 JAMB 1/8" (3.2) 4 JAMB NOTE: THE KAWNEER GLASSvent™ WINDOW IS SHOWN IN THESE DETAILS WITH TRIFAB™ VG 451T STOREFRONT FRAMING FOR REFERENCE. OTHER KAWNEER SYSTEMS CAN BE USED. FOR PRODUCT SPECIFIC APPLICATIONS CONSULT YOUR KAWNEER REPRESENTATIVE. kawneer.com ADME070 OPENING DIMENSION 3 1-13/16" (46) 1 HEAD 1 UNIT DIMENSION 1/8" (3.2) Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. SCALE 3" = 1'-0" GLASSventTM Windows for Storefront Framing MARCH, 2015 PROJECT-OUT WINDOW (1/4" INFILL) EC 97911-074 2-1/8" (54) TYP. 2 ELEVATION IS NUMBER KEYED TO DETAILS 1/8" (3.2) 2 SILL 4-1/2" (114.3) TYP. 1/8" (3.2) UNIT DIMENSION 1-13/16" (46) 3 JAMB 1/8" (3.2) NOTE: 1/4" INSET WHEN GLAZED WITH 1/4" INFILL. Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. OPENING DIMENSION 4 JAMB NOTE: THE KAWNEER GLASSvent™ WINDOW IS SHOWN IN THESE DETAILS WITH TRIFAB™ VG 451T STOREFRONT FRAMING FOR REFERENCE. OTHER KAWNEER SYSTEMS CAN BE USED. FOR PRODUCT SPECIFIC APPLICATIONS CONSULT YOUR KAWNEER REPRESENTATIVE. ADME070 kawneer.com © Kawneer Company, Inc., 2015 4 OPENING DIMENSION 3 1-13/16" (46) 1 HEAD 1 UNIT DIMENSION 1/8" (3.2) NOTE: 1/4" INSET WHEN GLAZED IN TRIFAB VG 450. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. SCALE 3" = 1'-0" 1-3/4" (44.5) 6 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. MARCH, 2015 GLASSventTM Windows for Storefront Framing EC 97911-074 PROJECT-OUT WINDOW HARDWARE STAINLESS STEEL 4 BAR HINGES A standard hinge for ventilators providing approximately 45° to 60° openings depending on size. An optional limit stop is available to restrict hinge travel and limit vent opening. CAM HANDLE Cast white bronze cam handles are standard for the manual operation and locking of ventilators. CAM HANDLE WITH POLE RING Cast white bronze cam handles with pole ring provide manual operation of ventilators located above reach. These handles are operated with a sash pole. POLE RING Cast white bronze pole ring is used in conjunction with locking hardware for sash pole operation of ventilators. SASH POLE A 3/4" diameter aluminum sash pole with a cast white bronze pull down hook and black rubber tip. Available in 6 ft. and 12 ft. lengths with optional cast white bronze Pole Hanger. © Kawneer Company, Inc., 2015 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. HANGER FOR SASH POLE 7 ACCESS CONTROL LOCK In lieu of cam handles cast white bronze access control locks are offered for managed control of vent operations. Lock is operated with a manganese bronze removable handle. PIVOT-SHOE ROTO-OPERATOR Optional pivot shoe roto operator is located on the center line of the bottom horizontal frame. Standard finish shall be brushed copper nickel to match US-25-D HOOK BOLT LOCK For use with pivot-shoe roto operator in lieu of cam handles. Standard finish shall be US-25-D clear white bronze. kawneer.com ADME070 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. GLASSventTM Windows for Storefront Framing MARCH, 2015 PROJECT-OUT WINDOW HARDWARE EC 97911-074 CONCEALED LOCK ADME070 kawneer.com © Kawneer Company, Inc., 2015 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 8 In lieu of cam handles cast white bronze concealed locks are offered for managed control of vent operations. Lock is operated with a removable key. © Kawneer Company, Inc., 2015 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. MARCH, 2015 GLASSventTM Windows for Storefront Framing EC 97911-074 OUTSWING CASEMENT WINDOW Features • • • • • Heavy Commercial Grade Window Tested to US Standards 45° Mitered Vent and Frame Corners Staked Corner Joinery Architectural Anodized Finishes and Applied Coatings HINGED LEFT Interior Exterior For specific product applications, Consult your Kawneer representative. kawneer.com ADME070 9 GLASSventTM Windows for Storefront Framing MARCH, 2015 OUTSWING CASEMENT WINDOW EC 97911-074 TESTING STANDARD AAMA / WDMA / CSA / 101 / I.S.2 / A440 (NAFS) SYSTEM DEPTH 2-3/4" Overall System Depth (1" Infill) 2-1/8" Overall System Depth (1/4" Infill) TYPICAL WALL THICKNESS 0.090 Nominal Frame TYPICAL MAX. VENT SIZE 36" x 60" TYPICAL MIN. VENT SIZE 14" x 14" INFILL OPTIONS 1" and 1/4" STANDARD HARDWARE Stainless Steel 4-Bar Hinges Cast White Bronze Cam Handles OPTIONAL HARDWARE Cam Lock with Pole Ring SashPole Pole Ring Access Control Locks Multi-Point Lock Hook Bolt Lock Concealed Lock with removable key Limit Stop OTHER OPTIONS Insect Screens ADME070 kawneer.com © Kawneer Company, Inc., 2015 Heavy Commercial Grade P-HC40 – P-HC70 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. CLASS and GRADE Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 10 MARCH, 2015 GLASSventTM Windows for Storefront Framing EC 97911-074 OUTSWING CASEMENT WINDOW (1" INFILL) SCALE 3" = 1'-0" 2 2-3/4" (69.9) TYP. ELEVATION IS NUMBER KEYED TO DETAILS 2" (50.8) 1/8" (3.2) 2 SILL 4-1/2" (114.3) TYP. OPENING DIMENSION 1/8" (3.2) UNIT DIMENSION 1-13/16" (46) 3 JAMB 1/8" (3.2) 4 JAMB NOTE: THE KAWNEER GLASSvent™ WINDOW IS SHOWN IN THESE DETAILS WITH TRIFAB™ VG 451T STOREFRONT FRAMING FOR REFERENCE. OTHER KAWNEER SYSTEMS CAN BE USED. FOR PRODUCT SPECIFIC APPLICATIONS CONSULT YOUR KAWNEER REPRESENTATIVE. kawneer.com ADME070 OPENING DIMENSION 1/8" (3.2) 1 HEAD UNIT DIMENSION 4 1-13/16" (46) 3 © Kawneer Company, Inc., 2015 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1 11 12 GLASSventTM Windows for Storefront Framing MARCH, 2015 OUTSWING CASEMENT WINDOW (1/4" INFILL) EC 97911-074 SCALE 6" = 1'-0" 2-1/8" (54) TYP. ELEVATION IS NUMBER KEYED TO DETAILS 1-3/4" (44.5) 1/8" (3.2) 2 SILL 4-1/2" (114.3) TYP. 1/8" (3.2) UNIT DIMENSION 1-13/16" (46) 3 JAMB 1/8" (3.2) NOTE: 1/4" INSET WHEN GLAZED WITH 1/4" INFILL. Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. OPENING DIMENSION 4 JAMB NOTE: THE KAWNEER GLASSvent™ WINDOW IS SHOWN IN THESE DETAILS WITH TRIFAB™ VG 451T STOREFRONT FRAMING FOR REFERENCE. OTHER KAWNEER SYSTEMS CAN BE USED. FOR PRODUCT SPECIFIC APPLICATIONS CONSULT YOUR KAWNEER REPRESENTATIVE. ADME070 kawneer.com © Kawneer Company, Inc., 2015 2 OPENING DIMENSION 1 HEAD UNIT DIMENSION 4 1-13/16" (46) 3 1/8" (3.2) 1 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. NOTE: 1/4" INSET WHEN GLAZED IN TRIFAB VG 450. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. MARCH, 2015 GLASSventTM Windows for Storefront Framing EC 97911-074 OUTSWING CASEMENT WINDOW HARDWARE STAINLESS STEEL 4 BAR HINGES A standard hinge for ventilators providing approximately 45° to 60° openings depending on size. An optional limit stop is available to restrict hinge travel and limit vent opening. CAM HANDLE Cast white bronze cam handles are standard for the manual operation and locking of ventilators. CAM HANDLE WITH POLE RING Cast white bronze cam handles with pole ring provide manual operation of ventilators located above reach. These handles are operated with a sash pole. POLE RING Cast white bronze pole ring is used in conjunction with locking hardware for sash pole operation of ventilators. SASH POLE A 3/4" diameter aluminum sash pole with a cast white bronze pull down hook and black rubber tip. Available in 6 ft. and 12 ft. lengths with optional cast white bronze Pole Hanger. © Kawneer Company, Inc., 2015 HANGER FOR SASH POLE Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 13 ACCESS CONTROL LOCK In lieu of cam handles cast white bronze access control locks are offered for managed control of vent operations. Lock is operated with a manganese bronze removable handle. HOOK BOLT LOCK For use with pivot-shoe roto operator in lieu of cam handles. Standard finish shall be US-25-D clear white bronze. MULTI-POINT LOCK Optional single locking handle for concealed multipoint locks located on the vertical frame. Standard finish shall be US-25-D clear white bronze. kawneer.com ADME070 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. GLASSventTM Windows for Storefront Framing MARCH, 2015 OUTSWING CASEMENT WINDOW HARDWARE EC 97911-074 CONCEALED LOCK ADME070 kawneer.com © Kawneer Company, Inc., 2015 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 14 In lieu of cam handles cast white bronze concealed locks are offered for managed control of vent operations. Lock is operated with a removable key.