Device Material Content 5555 NE Moore Ct. Hillsboro OR 97124 (503) 268-8000 [email protected] Package: Total Device Weight November, 2009 % of Total Pkg. Wt. Weight (g) Die 4.04% 0.222 Mold 30.13% 1.657 D/A Epoxy 0.57% 0.62% 0.0339 Solder Balls 24.22% 1.332 Foil 19.32% 21.10% with SnPb Solder Balls % of Total Weight (g) Pkg. Wt. MSL: 3 Peak Reflow Temp: 225°C Substance CAS # Silicon chip 7440-21-3 Notes / Assumptions: Die size: 17.25 x 17.72 mm 26.52% 1.81% 1.81% 1.458 0.0994 0.0994 Silica Epoxy resin Phenol resin 60676-86-0 - 0.45% 0.09% 0.03% 0.0250 0.0047 0.0016 Silver (Ag) Organic esters and resins Functionalized Urethane 7440-22-4 - Mold Compound composition: 75 to 95% Silica filler (LSC uses 88% in our calculation) 1 to 10% Epoxy resin (LSC uses 6% in our calculation) 2 to 8% Phenolic resin (LSC uses 6% in our calculation) Mold Compound Density ranges between 1.95 and 2.05 grams/cc Die attach epoxy Density: 4 grams/cc 70 to 90% Silver (LSC uses 80% in our calculation) 10 to 30% Organic Esters and Resins (LSC uses 15% in our calculation) 1 to 5% Functionalized Urethane (LSC uses 5% in our calculation) Gold (Au) 7440-57-5 0.8 to 1.0 mil diameter; 1 wire per solder ball 0.0313 Wire Substrate 1156 fpBGA 5.50 Grams 15.26% 8.96% 0.839 0.493 Tin (Sn) Lead (Pb) 7440-31-5 7439-92-1 Solder ball composition Sn63/Pb37 13.14% 6.18% 0.723 0.340 Glass fiber BT Resins 65997-17-3 - 60 to 75% glass fiber (LSC uses 68% in our calculation) Copper (Cu) 7440-50-8 1.063 1.160 Notes: The values listed above are nominal values based on studies of representatives of this particular package type, and are believed to be as accurate as possible. Constituent substances and proportions in epoxy materials are before curing. The information provided above is representative of the package as of the date listed, and is subject to change at any time. www.latticesemi.com Rev. B1