SIDACtor ® Protection Thyristors SLIC Protection Fixed Voltage Q2L Series 3.3x3.3 QFN Pb e3 RoHS Description Fixed Voltage Q2L Series are uni-directional SIDACtor® thyristors designed to protect SLICs (Subscriber Line Interface Circuit) from damaging overvoltage transients. The series provides single line protection using a fixed voltage switching component for negative surges. All positive surges are routed through an internal diode to a ground reference. The small size of the Q2L makes it ideal for high density applications. Features and Benefits Agency Approvals Agency Q2L C SLIC Pinout surged in excess of ratings • Integrated diode for positive voltage surges Agency File Number • S mall footprint QFN Package E133083 • Pb-free E3 means 2nd level interconnect is • Low on-state voltage Pb-free and the terminal • Does not degrade surge finish material is tin(Sn) capability after multiple (IPC/JEDEC J-STDsurge events within limit. 609A.01) • Fails short circuit when Pinout Designation Cathode Indicator Applicable Global Standards Schematic Symbol (T/R) • RoHS Compliant and Halogen-Free • Low profile • TIA-968-A • GR-1089 Intra-building • TIA-968-B • IEC 61000-4-5 2nd editin • ITU K.20/21/Enhanced Level (G) • YD/T 950 • ITU K.20/21/Basic Level • YD/T 993 • GR 1089 Inter-building • YD/T 1082 Additional Information Datasheet Samples Resources Electrical Characteristics Part Number Marking P0641Q22CLRP P0721Q22CLRP P0901Q22CLRP P1101Q22CLRP P1301Q22CLRP P1701Q22CLRP P61C P71C P91C P10C P13C P17C VDRM VS @IDRM=5µA @100V/µs V min V max 58 65 75 95 120 160 77 88 98 130 160 200 IH IS IT mA min mA max A max 120 120 120 120 120 120 800 800 800 800 800 800 2.2 2.2 2.2 2.2 2.2 2.2 VT @IT =2.2 Amps Capacitance @1MHz @ 2V bias VF V max V max pF min pF max 4 4 4 4 4 4 5 5 5 5 5 5 35 25 55 50 45 45 75 45 85 75 70 70 Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Components are not appropriate for positive ringing systems. © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/16/16 SIDACtor ® Protection Thyristors SLIC Protection Surge Ratings ITSM Ipp Series di/dt 2/10µs 1.2/50µs/8/20µs 10/160µs 10/560µs 10/1000µs 50 / 60Hz A min A min A min A min A min A min Amps/µs max 500 400 200 150 100 30 500 C Notes: - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product that remains in thermal equilibrium. - IPP ratings applicable over temperature range of -40ºC to +85ºC - The component must initially be in thermal equilibrium with -40°C < TJ < +150°C Thermal Considerations Package Symbol Parameter Value Unit 3.3x3.3 QFN TJ Operating Junction Temperature Range -40 to +150 °C TS Storage Temperature Range -65 to +150 °C R0JA Thermal Resistance: Junction to Ambient 120 °C/W V-I Characteristics tr x td Pulse Waveform VS VDRM VF IPP – Peak Pulse Current – %IPP +I VT -V IDRM +V IH IS Peak Value 100 IT tr = rise time to peak value td = decay time to half value Waveform = tr x td 50 Half Value 0 0 td tr t – Time (µs) -I Normalized DC Holding Current vs. Case Temperature 10 IH 8 6 25 °C 4 IH (TC = 25ºC) 2.0 14 12 Ratio of Percent of VS Change – % Normalized VS Change vs. Junction Temperature 2 0 -4 -6 1.8 1.6 1.4 1.0 0.8 0.6 0.4 -8 -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – °C © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/16/16 25°C 1.2 -40 -20 0 20 40 60 80 100 120 140 Case Temperature (TC) - ºC 160 SIDACtor ® Protection Thyristors SLIC Protection Soldering Parameters Pb-Free assembly (see Fig. 1) +150°C +200°C 60-180 secs. - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (Min to Max) (ts) Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reflow - Temperature (TL) (Liquidus) +217°C - Temperature (tL) 60-150 secs. Peak Temp (TP) +260(+0/-5)°C Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed +260°C TP tP Critical Zone TL to TP Ramp-up TL TS(max) tL Ramp-down Preheat TS(min) tS 25 time to peak temperature (t 25ºC to peak) Time Environmental Specifications Physical Specifications Lead Material Copper Alloy Terminal Finish 100% Matte-Tin Plated Body Material UL Recognized epoxy meeting flammability classification V-0 Part Numbering High Temp Voltage Blocking 80% Rated VDRM (VDC ) +125°C or +150°C, 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 Temp Cycling -65°C to +150°C, 15 min. dwell, 10 up to 100 cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased Temp & Humidity 52 VDC (+85°C) 85%RH, 504 up to 1008 hrs. EIA/ JEDEC, JESD22-A-101 High Temp Storage +150°C 1008 hrs. MIL-STD-750 (Method 1031) JEDEC, JESD22-A-101 Low Temp Storage -65°C, 1008 hrs. Thermal Shock 0°C to +100°C, 5 min. dwell, 10 sec. transfer, 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Resistance to Solder Heat +260°C, 30 secs. MIL-STD-750 (Method 2031) Moisture Sensitivity Level 85%RH, +85°C, 168 hrs., 3 reflow cycles (+260°C Peak). JEDEC-J-STD-020, Level 1 Part Marking P xxx 1 Q22 C L RP TYPE P=SIDACtor REEL PACK MEDIAN VOLTAGE RoHS COMPLIANT CONSTRUCTION VARIABLE IPP RATING PACKAGE TYPE Figure 1 Temperature Reflow Condition Cathode Indicator XXXX XXXXX Part Marking Code (Refer to Electrical Characteristics Table) Date Code Terminals on Back © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/16/16 SIDACtor ® Protection Thyristors SLIC Protection Dimensions — 3.3x3.3 QFN BOTTOM VIEW TOP VIEW Dimensions C A E J B END VIEW A B C E F H J K1 K2 M1 M2 N1 N2 F H 2.54 (.100”) 1.50 (.059”) SIDE VIEW 1.27 (.050”) N2 N1 M1 K1 K2 M2 Recommended Soldering Pad Outline (Reference Only) Inches Millimeters Min Max Min Max 0.126 0.126 0.075 0.011 0.088 0.035 0.000 0.004 0.004 0.063 0.045 0.095 0.082 0.134 0.134 0.083 0.019 0.096 0.043 0.008 0.012 0.012 0.071 0.053 0.103 0.090 3.200 3.200 1.900 0.285 2.230 0.900 0.000 0.100 0.100 1.610 1.153 2.420 2.080 3.400 3.400 2.100 0.485 2.430 1.100 0.200 0.300 0.300 1.810 1.353 2.620 2.280 Packing Options Package Type Description Quantity Added Suffix Industry Standard Q22 3.3x3.3 QFN Tape and Reel Pack 5000 RP EIA-481-D Tape and Reel Dimension — 3.3x3.3 QFN Reel Dimension A B C D N W1 A0 B0 D0 D1 E1 E2 F K0 P0 P1 P2 T W W0 C A Inches Min Max Reel Diameter N/A 12.992 Drive Spoke Width 0.059 N/A Arbor Hole Diameter 0.504 0.531 Drive Spoke Diameter 0.795 N/A Hub Diameter 1.969 N/A Reel Inner Width at Hub 0.488 0.567 Pocket Width at bottom 0.138 0.146 Pocket Length at bottom 0.138 0.146 Feed Hole Diameter 0.059 0.063 Pocket Hole Diameter 0.059 N/A Feed hole position 1 0.065 0.073 Feed hole position 2 0.400 0.408 Feed hole center-Pocket hole 0.215 0.219 Pocket Depth 0.039 0.051 Feed Hole Pitch 0.153 0.161 Component Spacing 0.311 0.319 Feed hole center-Pocket hole 0.077 0.081 Carrier Tape Thickness 0.010 0.014 Embossed Carrier Tape Width 0.453 0.484 Cover Tape Width 0.358 0.366 Description D N W1 B Tape Leader and Trailer Dimensions CARRIER TAPE END COVER TAPE START TRAILER 160mm MIN LEADER 400mm MIN Tape Dimension Items D0 P0 P2 T CARRIER TAPE D1 E1 B0 W0 K0 CATHODE INDICATOR © 2016 Littelfuse, Inc. COVER TAPE Specifications are subject to change without notice. Revised: 05/16/16 P1 A0 F E2 W Millimeters Min Max N/A 330.0 1.50 N/A 12.80 13.50 20.20 N/A 50.00 N/A 12.40 14.40 3.50 3.70 3.50 3.70 1.50 1.60 1.50 N/A 1.65 1.85 10.15 10.35 5.45 5.55 1.00 1.30 3.90 4.10 7.90 8.10 1.95 2.05 0.25 0.35 11.50 12.30 9.10 9.30