PPMxx-X-xxZSLF

PPMxx-X-xxZSLF
PPM-SERIES
Rev.10-2013
5 - 20 Watt
Univ. 85-264VAC and 50/60Hz
Dual Separate Output
Overload Protection
3 kV AC I/O Isolation
Low Ripple and Noise
High Efficiency
Mainzer Straße 151–153
D-55299 Nackenheim
Tel. +49 6135 7026-0
Fax: +49 6135 931070
www.peak-electronics.de
[email protected]
The PPM-Series are high efficiency modules with various packaging
provided by Peak. The features of this series are: wide input voltage, DC
and AC all in one, high efficiency, high reliability, low loss, safety isolation
etc. They are widely used in industrial, office and civil equipments. EMC
and safety standards meet international standards IEC61000 UL60950 and
IEC60950, and Multi-certificate is in processing.
All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified
Input Specifications
Input Voltage Range
Input Frequency
Input (Inrush) Current
85 – 264 VAC or 120 – 370 VDC universal
47 – 63 Hz
115 VAC
230 VAC
125mA (10A), max. 80mA (20A), max.
260mA (10A), max. 160mA (20A), max.
370mA (10A), max. 220mA (20A), max.
600mA (16A), max. 340mA (30A), max.
PPM05 models
PPM10 models
PPM15 models
PPM20 models
External Input Fuse (recommended)
PPM05 models
1A / 250V slow blow
PPM10 / 15 models
2A / 250V slow blow
PPM20 models 3.15A / 250V slow blow
Output Specifications
Voltage Accuracy
Line Regulation
Load Regulation (10-100% balanced load)
±2% (main output)
±0.5% (main output)
±1.5% (supplement output)
Vo1: ±3%
Vo2: ±5%
10%
≤ 100mV pk-pk (main output)
Continuous, auto recovery
≥ 110% Io
Minimum load
Ripple and Noise (20Mhz bandwidth)
Short Circuit Protection
Over Current Protection
Over output voltage protection
5VDC models ≤7.5VDC
12 / 15VDC models ≤20VDC
24VDC models ≤30VDC
PPM-Series – PPMxx-X-xxZSLF –Dual Sep. Output - Plastic Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 1/6
PPMxx-X-xxZSLF
Common Specifications
Temperature range
Power derating
Case temperature
Storage
Hold up Time
Humidity (non condensing)
Temperature Coefficient
Switching Frequency
I/O Isolation Voltage
Safety Standards
Safety Class
Hot Swap
Case Material
Cooling
Reliability Calculated MTBF (MIL-HDBK-217F)
Weight
-40°C to +70 °C
3.75% / °C (above 55°C)
+90°C, max
-40°C to +105 °C
80mS, typ. (230VAC)
95%, max.
0.02%/°C (main output)
0.15%/°C (supplement output)
65kHz
3000VAC / 1min.
IEC60950, EN60950, UL60950
CLASS 1
Forbid
UL94V-0 rated
Free air convection
> 300,000 hrs
50g (PPM05) 80g (PPM10)
85g (PPM15) 120g (PPM20)
EMC Specifications
EMI / CE, RE
CISPR22 / EN55022, Class B
EMC compliance
ESD
RS
EFT
Surge
IEC/EN 61000-4-2 ±6KV/±8KV
IEC/EN 61000-4-3 10V/m
IEC/EN 61000-4-4 ±2KV (without external circuit)
IEC/EN 61000-4-4 ±4KV (recommended circuit)
IEC/EN 61000-4-5 ±1KV / ±2KV (without external Circuit)
IEC/EN 61000-4-5 ±2KV / ±4KV (recommended circuit)
IEC/EN 61000-4-6 10 Vr.m.s
IEC/EN 61000-4-6 10 A/m
perf Criteria B
perf Criteria A
perf Criteria B
perf Criteria B
perf Criteria B
perf Criteria B
perf Criteria A
perf Criteria A
IEC/EN 61000-4-11 0%-70%
perf Criteria B
CS
PFM
Voltage dips, short and interruption immunity
Notes:
PPM-Series – PPMxx-X-xxZSLF –Dual Sep. Output - Plastic Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 2/6
Selection Guide
Dual Separate Output
W)
er (
w
o
P
Order #
Out
olta
t2 V
u
O
1/
)
VDC
ge (
Out
1
t2 C
/ Ou
nt
urre
Lo
Full
)
mA
ad (
d(
Loa
r
o
c it
apa
2C
/ Vo ax
1
o
V
m
,
uF)
cy (
cien
i
f
f
E
DUAL SEPARATE OUTPUT
PPM05-A-0505ZSLF
PPM05-A-0512ZSLF
PPM05-A-0515ZSLF
PPM05-A-0524ZSLF
5
5
5
5
5/5
5 / 12
5 / 15
5 / 24
900 / 100
750 / 100
700 / 100
600 / 100
3360 / 370
2400 / 170
2160 / 170
4560 / 370
71
73
73
75
PPM10-B-0505ZSLF
PPM10-B-0512ZSLF
PPM10-B-0515ZSLF
PPM10-B-0524ZSLF
10
10
10
10
5/5
5 / 12
5 / 15
5 / 24
1800 / 200
1500 / 200
1400 / 200
1000 / 200
8000 / 540
4400 / 260
4400 / 170
4000 / 170
75
79
79
81
PPM15-C-0505ZSLF
PPM15-C-0512ZSLF
PPM15-C-0515ZSLF
PPM15-C-0524ZSLF
15
15
15
15
5/5
5 / 12
5 / 15
5 / 24
2200 / 800
2000 / 400
2000 / 300
2000 / 200
10800 / 2960
8640 / 1200
6480 / 800
12900 / 800
76
80
80
81
PPM20-D-0512ZSLF
PPM20-D-0515ZSLF
PPM20-D-0524ZSLF
20
20
20
5 / 12
5 / 15
5 / 24
2500 / 600
12 / 600
2500 / 300
32400 / 3250
28000 / 1980
28000 / 720
75
76
77
%)
If you need other specifications, please enquire.
Notes:
PPM-Series – PPMxx-X-xxZSLF –Dual Sep. Output - Plastic Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 3/6
Package / Pinning / Derating
PIN CONNECTIONS
#
DUAL SEP
1
Ground
2
AC (N)
3
AC (L)
4
- Vout 1
5
+Vout 1
6
No Pin
7
- Vout 2
8
+Vout 2
TRIM No Pin
No. PPM05-A
A
12.5
B
48.5
C
40.5
D
4.0
E
16.0
F
36.0
G
20.5
H
min. 6.0
No.
A
B
C
D
E
F
G
H
PPM10-B
17.5
55.0
47.0
5.0
20.0
45.0
20.5
min. 6.0
No. PPM15-C
A
17.5
B
62.0
C
54.0
D
5.0
E
20.0
F
48.0
G
22.5
H
min. 6.0
No.
A
B
C
D
E
F
G
H
PPM20-D
20.0
70.0
62.0
5.75
23.0
48.0
23.5
min. 6.0
Temperature Derating Graph
Ambient Temperature ° C
Output
100%
75
60
43,75
40
25
-40
-10
0
55
70
PPM-Series – PPMxx-X-xxZSLF –Dual Sep. Output - Plastic Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 4/6
100
App Notes
Parallel Lines Measure
Co p p e r s h e e t
F USE
AC(L)
A C (L)
+Vo
AC(N)
AC(N )
C2
C1
AC/DC
Co n n e c t
Os c illo g ra p h Pro b e
Load
-Vo
12. 7m m
25. 4m m
25. 4m m
Note: C1: 1µF (Ceramic capacitor) C2: 10µF (Electrolytic capacitor)
Trim Application & Trim Calculation
Application Circuit for TRIM
Formula for resistance of Trim
+Vot
+Vot
R1
V ref
R3
Trim
V ref
R2
RT
R1
R3
Trim
RT
R2
up: R T =
aR 2
R 2 -a
-R 3
a=
Vref
R1
Vot-Vref
down: R T =
aR 1
R 1 -a
-R 3
a=
Vot-Vref
R2
Vref
Note: Value for R1, R2, R3, and Vref refer to the following table.
RT: Resistance of Trim
a: User-defined parameter, no actual meanings.
Vo(V)
Resistance
0V
0V
Trim up
Trim down
3.3
5
R1(KΩ)
3.3
R2(KΩ)
1.98
R3(KΩ)
1
Vref(V)
1.24
Vot(V)
9
12
15
24
3.3
7.5
3.83
7.5
8.66
68
3.3
2.87
1
1.5
1
3.73
1
1
1
1
1
1
2.5
2.5
2.5
2.5
2.5
2.5
Output voltage of Trim, variation ≤ ±10%
Typical Application
FUSE
NTC
AC(L)
MOV
AC(N)
C1
AC(L)
C2 T VS1 RL
AC(L )
AC(L )
+Vo
+Vo
+
AC/DC
Vo 1
AC/DC -
AC(N)
AC(N)
AC(N)
-Vo
+
-Vo
Vo 2
-
C3
C4 T VS2 RL
Note: This application is not supported for this series
PPM-Series – PPMxx-X-xxZSLF –Dual Sep. Output - Plastic Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 5/6
48
App Notes
EMC Recommended Circuit
FUSE
R2
AC(L)
AC(L)
CY1
MOV1
+Vo
C1
C2
TVS1
RL
CY3
CX
R3
LCM
CY2
CY4
A C/DC
R1
AC(N)
AC(N)
-Vo
Recommended circuit for applications which require higher EMC standard
External Circuit Parameter
Model
PPM05-A-0505ZSLF
PPM05-A-0512ZSLF
PPM05-A-0515ZSLF
PPM05-A-0524ZSLF
PPM10-B-0505ZSLF
PPM10-B-0512ZSLF
PPM10-B-0515ZSLF
PPM10-B-0524ZSLF
PPM15-C-0505ZSLF
PPM15-C-0512ZSLF
PPM15-C-0515ZSLF
PPM15-C-0524ZSLF
PPM20-D-0512ZSLF
PPM20-D-0515ZSLF
PPM20-D-0524ZSLF
C2 (µF)
220
220
120
120
220
220
220
220
470
470
470
470
330
330
330
C4 (µF)
22
22
22
22
68
68
47
47
470
220
120
47
220
220
120
TVS1
SMBJ7.0A
TVS2
SMBJ7.0A
SMBJ20A
SMBJ20A
SMBJ30A
SMBJ7.0A
SMBJ20A
SMBJ20A
SMBJ30A
SMBJ7.0A
SMBJ20A
SMBJ20A
SMBJ30A
SMBJ20A
SMBJ20A
SMBJ30A
Note
1. Output filtering capacitors C2, C4 and C6 are electrolytic capacitors, It is recommended to use high
frequency and low impedance electrolytic capacitors. For capacitance and current of capacitor please refer to
manufacture’s datasheet. Voltage derating of capacitor should be 80% or above. C1, C3, C5 are used to filter
high frequency noise, suggest choose 1µF. TVS is recommended component to protect post-circuits (if
converter fails). External input NTC is recommended to use 5D-9.
2.
Recommended parameter for higher EMC standard circuit:
MOV:
S14K350
R1, R2:
2Ω/3W
R3:
1Ω/2W
CY1, CY2, CY3, CY4:
1nF/400VAC
CX:
0.22µF/275VAC
FUSE:
PPM05:
1A/250V
PPM10/PPM15: 2A/250V
PPM20:
3.15A/250V
PPM-Series – PPMxx-X-xxZSLF –Dual Sep. Output - Plastic Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 6/6