Power Modules Upgraded flowPIM® 0 + PFC for Drive Applications Requiring PFC Vincotech extends product line with state-of-the-art components and extended power range ® flowPIM 0 + PFC 2nd 17 x 66 x 33 mm³ Vincotech has unveiled the latest generation flowPIM® 0 + PFC 2nd line of modules for motor drive applications requiring active power factor correction (PFC). These modules feature power components such as a rectifier, inverter, and active PFC. While the housing has remained unchanged, state-of-the-art semiconductor technology is on board to increase the module’s power density. In addition to a rectifier and inverter, the flowPIM® 0 + PFC 2nd features a boost switch, diode, shunt resistor, and DC link snubber capacitor. This latest-generation module covers input power ranges from less than 1 kW up to 4 kW. The most powerful version is equipped with an SiC boost diode for highest efficiency and performance. Active PFC is becoming a familiar sight in modules because of regulations such as EN 6100-3-2. It also offers technical benefits such as wide-range input voltage and higher DC link voltages for higher efficiencies. Some changes have been made to the internal wiring of this new Vincotech GmbH Biberger Straße 93 82008 Unterhaching Germany generation of modules. The rectifier and PFC are not connected internally for a more EMC-friendly design. The shunt can be used to sense PFC or inverter current. The connection is open, so the shunt’s www.vincotech.com Status: Jul-13 Power Modules value may be adjusted via external circuits. The inverter section’s open Main Features: collector topology enables easy current sensing for each phase. A 100 nF snubber capacitor for the DC link and an NTC are also 600 V, 4 – 20 A MOSFET (CoolMOS™) integrated. PFC boost circuit PFC switching frequency up flowPIM® 0 + PFC 2nd gen. at a glance to 200 kHz Inverter section with IGBT3 technology Clip-in PCB mounting Part. no.: Voltage Current Comments 10-F006PPA004SB-M681B 600 V 4A 10-F006PPA006SB-M682B 600 V 6A IGBT3 IGBT3 10-F006PPA010SB-M683B 600 V 10 A IGBT3 10-F006PPA015SB-M684B 600 V 15 A IGBT3 10-F006PPA020SB-M685B 600 V 20 A IGBT3 10-F006PPA020SB01-M685B10 600 V 20 A IGBT3; SiC PFC diode The flowPIM® 0 + PFC module comes in a 17-mm, 2-clip flow 0 housing with solder pins. Other options (12-mm housing, Press-fit pins) are available on request. Vincotech GmbH Biberger Straße 93 82008 Unterhaching Germany www.vincotech.com Status: Jul-13