Download

M1-203D-TR (Ver. 1.1)
www.opticis.com
DATA SHEET
Digital Video/Analogue Audio
Optical Extender
M1-203D-TR
Contents
 Description
 Features
 Absolute Maximum Ratings
 Recommended Operating Conditions
 Electrical Power Supply Characteristics
 Optical and Electrical Characteristics
 Drawing of transmitter and receiver modules
 DVI Pin Description
 Reliability Test of Modules
 Terminology
Headquarters
Opticis Co., Ltd.
# 16Fl, Kins Tower
8 Sungnam-daero, 331 beon-gil,
Bundang-gu,
Seongnam-si, Gyunggi-do, 463-844
South Korea
Te l: +82 (31) 719-8033
Fax: +82 (31) 719-8032
www.opticis.com
Copyright © 2015, All rights reserved, Opticis Co., Ltd.
02 Jan. 2015
M1-203D-TR (Ver. 1.1)
www.opticis.com
Digital Video/Audio Extender
Description
Optical DVI and audio extender, M1-203D-TR offers a high-quality, uncompressed data link between
video source and a display peripheral. Optical technology for this transmission stretches the
performance beyond the limitations of copper wire with longer length, data security, negligible RFI/EMI
and the elimination of costly analogue distribution systems
The EDID in a display can be read and restored by just plugging the transmitter to the display. This
self EDID programming feature makes the installation of M1-203D-TR more easy and flexile at any
variable resolution display systems
M1-203D-TR gives benefits of all optical fiber transmission, long distance extension and cost
effectiveness to realize digital signage including audio. It offers integrated extension of digital video
and analogue stereo audio interface up to 2km (6,560 ft) for DVI. It maintains HD video signals up to
WUXGA (1920x1200) at 60Hz refresh rate for PC.
It is designed to multiplex and de-multiplex the DVI video and analog audio over 2 LC fibers. It gives
benefits of all-glass fiber transmission medium, data security, long distance extension up to 2km, easy
plug-and-play installation and no RFI/EMI effects. In addition, a non-trivial feature is that both of Single
and Multimode optical fibers are applicable.
The M1-203D-TR consists of a transmitter (Tx) and a receiver (Rx) connected by two duplex LC
terminated single or multi-mode patch cords between them, which offers electrical perfect isolation.
Each link module is driven by +12V/3A DC power adaptor.
The shipping group is as follows;
1) One pair of the transmitter and the Receiver
2) Two +12V/3A power adapters
3) User Manual
Copyright © 2015, All rights reserved, Opticis Co., Ltd.
-1-
02 Jan. 2015
M1-203D-TR (Ver. 1.1)
www.opticis.com
Feature

Support all VESA resolution up to WUXGA(1,920X1,200) 60Hz(1.62Gbps) DVI data up to 2,000m.

Applicable to both single and multi-mode fibers without any change of optical components.
(1) Up to 2,000m with two LC single-mode fibers
(2) Up to 500m with two LC multi-mode fibers

Audio interface: Analogue stereo audio

Supports Self-EDID programming feature, detecting from a display and restoring to an EEPROM
in the transmitter just by plugging to the display without any physical DDC connection

Video data: WUXGA (1920X1200), 24bit color and 60Hz refresh rate for DVI.

Interconnection between transmitter and receiver: Two(2) Duplex LC patch cords of single or multi
mode fiber.

Applicable of both single and multi-mode fiber.

+12 V DC power supply to each module.

Complies with DDC2B.

No software to install; plug and play.

Data security with negligible RFI/EMI emissions

Certifications: CE / FCC
Applications

Digital display system integration for medical, military, aerospace, factory automation, and traffic
control platforms.

Digital FPD, PDP and projector installation in conference rooms, auditoriums and for kiosk
systems

LED signboards for large scale information display and stadiums
Copyright © 2015, All rights reserved, Opticis Co., Ltd.
-2-
02 Jan. 2015
M1-203D-TR (Ver. 1.1)
www.opticis.com
Absolute Maximum Ratings
Parameter
Storage Temperature
Supply Voltage
Transmitter Differential Input Voltage
Relative Humidity
Lead Soldering Temperature & Time
Symbol
Tstg
VCC
Vd
RH
-
Minimum
- 30
10
10
-
Maximum
+ 70
16
1
85
Units
C
V
V
%
260C, 10 sec
Recommended Operating Conditions
Parameter
Ambient Operating Temperature
Data Output Load
Power Supply Rejection (Note1)
Supply Voltage
Symbol
TA
RLD
PSR
VCC
Minimum
0
+ 11.4
Typical
50
50
+ 12.0
Maximum
+ 50
+ 12.6
Units
C
Ω
mVp-p
V
Note1. Tested with a 50mVp-p sinusoidal signal in the frequency range from 500 Hz to 500 MHz on the V CC supply with
the recommended power supply filter in place. Typically less than a 0.25 dB change in sensitivity is experienced.
Electrical Power Supply Characteristics
(TA = 0 C to +50 C, unless otherwise noted)
Parameter
Supply Voltage
Supply Current
Power Dissipation
TX
RX
TX
RX
Symbol
VCC
ITCC
IRCC
PTX
PRX
Minimum
11.4
460
400
5.3
4.6
Copyright © 2015, All rights reserved, Opticis Co., Ltd.
-3-
Typical
12
540
480
6.5
5.8
Maximum
12.6
600
540
7.6
6.8
Units
V
mA
mA
W
W
02 Jan. 2015
M1-203D-TR (Ver. 1.1)
www.opticis.com
Optical & Electrical Characteristics
Parameters
Symbol
1310 Tx
1550 Rx
Data Bit Rate
1550 Tx
1310 Rx
Fiber Length
9µum core SMF
(Top = 25℃)
Condition
Unit
PRBS 2 -1,NRZ
23
Mbps
1250
23
Mbps
1250
PRBS 2 -1,NRZ
Min.
Typ.
Max.
Remark
-10
10 BER,
155Mbps/1.25Gbps
km
2
dBm
-11
dB
5
CW, @ POUT
nm
1270
1500
RMS Width
TRANSMITTER
Average Power Output
POUT
Extinction Ratio
ER
Center Wavelength
C
Spectral Width
If=IBIAS + Imod/2
RIN
Optical Rise/Fall Time
tr/tf
-9
-7
1310
1550
nm
1355
1600
4.0
dB/Hz
-120
nsec
0.26
2.0
20 – 80%
@1.31 µm
@1.55 µm
RECEIVER
Sensitivity
(Average Input Power)
1310
Wavelength
1550
Receiver Overload
Signal Detect Threshold
Decreasing light input
Increasing light input
PIN,MIN
23
PRBS 2 -1,
-10
10 BER
dBm
nm
-19
1260
1500
-3.0
PIN,MAX
dBm
PD
PA
dBm
dBm
Signal Detect Hysteresis
PA - PD
dB
0.5
Parameters
Symbol
Unit
Min.
Condition
1.25G Rx
1310
1550
1360
1600
PIN,MIN-3
PIN,MIN-2
Typ.
Max.
Remark
Audio (Analog)
Analog Sample Rate
Faudio_a
Input level
output level
Input Impedance
Output Impedance
Ain
Aout
Vpp=3.3V/Analog
Copyright © 2015, All rights reserved, Opticis Co., Ltd.
-4-
kHz
48
Vpp
Vpp
kΩ
Ω
0.56Vss
0.65
25
100
02 Jan. 2015
M1-203D-TR (Ver. 1.1)
www.opticis.com
Drawing of transmitter and receiver modules
Dimension [mm]
Transmitter
Receiver
Copyright © 2015, All rights reserved, Opticis Co., Ltd.
-5-
02 Jan. 2015
M1-203D-TR (Ver. 1.1)
www.opticis.com
DVI Pin Description
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
Symbol
CH2CH2+
GND
Functional Description
TMDS Data Signal Channel 2 Negative
TMDS Data Signal Channel 2 Positive
TMDS Data Signal Channel 2 Shield
DDC Clock
DDC Data
N.C.
CH1CH1+
GND
DDC Clock line for DDC2B communication
DDC Data line for DDC2B communication
14
5V
15
GND
Hot plug
Detect
CH0CH0+
GND
5 V Input for Transmitter from Host
5 V Output for Monitor from Receiver
Ground
Signal is driven by monitor to enable the system to identify the presence
of a monitor
TMDS Data Signal Channel 0 Negative
TMDS Data Signal Channel 0 Positive
TMDS Data Signal Channel 0 Shield
GND
CLK+
CLK-
TMDS Clock Signal Shield
TMDS Clock Channel Positive
TMDS Clock Channel Negative
16
17
18
19
20
21
22
23
24
TMDS Data Signal Channel 1 Negative
TMDS Data Signal Channel 1 Positive
TMDS Data Signal Channel 1 Shield
Note: Channels 3, 4 and 5 dual-link data signal pins are not used
Copyright © 2015, All rights reserved, Opticis Co., Ltd.
-6-
02 Jan. 2015
M1-203D-TR (Ver. 1.1)
www.opticis.com
Reliability Test
Opticis utilizes three types of test criteria for a reduction of variability and a continuous improvement of
the process by its FEMA (Failure Mode and Effective Analysis) program.
1) Mechanical test (vibration, shock)
2) Temperature & humidity tests
3) EMC test (FCC class A and CE Verification)
Mechanical and Temperature & Humidity Test Data
Heading
Operating
Test
Storage
Test
Test
Operating at each
Temperature
(See Note)
Duration
Sample
Failure
Size
30 Min
* 0 ~ 50 °C
(Each
(Interval: 10 °C)
n =3
0
Temperature)
Remarks
Note: Visual Test on the
Display
Low Temperature
* TS = -30 °C
96 HR
n=3
0
1. TS: Storage Temperature
High Temperature
* TS = 70 °C
96 HR
n=3
0
2. RH: Relative Humidity
High Humidity
* TS: 60 °C
96 HR
n=3
0
High Temperature
* RH: 95%
-
n=2
0
-
n=2
0
Mechanical
Shock
Mechanical
Test
Conditions
* Pulse: 11 ms
* Peak level: 30 g
* Shock pulse: 3 times/Axis
* Peak acceleration: 20 g
Mechanical
* Frequency: 20~2000 ㎐
Vibration
* Sweep time: 30 Minutes
* 4 Times/Axis
Copyright © 2015, All rights reserved, Opticis Co., Ltd.
-7-
02 Jan. 2015
M1-203D-TR (Ver. 1.1)
www.opticis.com
EMC Test Data
1) EMI: Meet FCC class A (ICES-003) and CE class A
STANDARDS
EN 55 022 (CISPR22)
CE (Conducted Emission) &
FCC; PART 15 SUBPART B
RE (Radiated Emission)
EN 61000-3-2 (IEC 61000-3-2)
Harmonics
EN 61000-3-3 (IEC 61000-3-3)
Flickers
CONDITIONS
Meet Class A
Meet Class A
Meet Class A
2) EMS: Meet CE standards (EN 55024) and CISPR24 equivalents
EN 61 000-4-2:1995
EN 61 000-4-3:1996
EN 61 000-4-4:1995
EN 61 000-4-5:1995
EN 61 000-4-6:1996
EN 61 000-4-11:1994
STANDARDS
Electrostatic Discharge Immunity
(Air: 8kv, Contact: 4kv)
Radiated RF E-Field (80~1000 MHz)
3V/m (AM 80%, 1kHz)
Fast Transients (5kHz, 60Seconds)
Surge Transients
Conducted Susceptibility (CS)
Radiated Susceptibility (RS)
Voltage Dips, Interruption & Variation
Copyright © 2015, All rights reserved, Opticis Co., Ltd.
-8-
CONDITIONS
Meet Criterion A
Meet Criterion A
Meet Criterion A
Meet Criterion A
Meet Criterion A
Meet Criterion A and C
02 Jan. 2015