New Dual and Triple 2 x 100 A 10/1000 Overvoltage Protectors in TO-220 Pin Compatible Single In Line Package The new TISP6NTP2x is the most cost effective single device to protect two short loop telephone lines. New Product Bulletin • Volume 1 • 3rd Quarter 2001 Features • 2 x 100 A 10/1000 surge The dual-bidirectional TISP3xxxH3SL and triple element bidirectional TISP7xxxH3SL are 2 x 100A 10/1000 rated • Provides high level of protection • Rated current may be applied terminals Part 68 or GR-1089-CORE must be met. Supplied in the TO-220 pin compatible low-height 3-pin single in line (SL) package, these Low-height TO-220 pin compatible package • Single chip construction gives close Extensive voltage selections The TISP3xxxH3SL dual bidirectional configuration means that the available to meet application protection voltage from Tip to Ring will be twice the Tip or Ring to Ground voltage. The TISP7xxxH3SL triple bidirectional design means the protection voltage between each terminal pair is the requirements • TISP3xxxH3SL 70 V to 350 V • TISP7xxxH3SL 70 V to 400 V • Pxx02Ax, Pxx03Ax and TLPxxxG-1 SLIC 1 RING 1 Stand-Off Voltage VDRM Protection Voltage V(BO) ITSP Ratings for Lightning Surge Standards 2/10µs 10/1000µs Functional Replacement for TISP3070H3SL 58 70 500 100 P1402AB, P1402AC TISP3080H3SL 65 80 500 100 P1602AB, P1602AC TISP3095H3SL 75 95 500 100 * TISP3115H3SL 90 115 500 100 P2202AB, P2202AC TISP3125H3SL 100 125 500 100 P2202AB, P2202AC TISP3135H3SL 110 135 500 100 * TISP3145H3SL 120 145 500 100 P2702AB, P2702AC TISP3180H3SL 145 180 500 100 P3002AB, P3002AC TISP3210H3SL 160 210 500 100 P3602AB, P3602AC TISP3250H3SL 190 250 500 100 P4202AB, P4202AC TISP3290H3SL 220 290 500 100 P4802AB, P4802AC TISP3350H3SL 275 350 500 100 P6002AB, P6002AC TISP7070H3SL 58 70 500 100 * TISP7080H3SL 65 80 500 100 * 2 TISP6NTP2 protects two SLICs with one device • Single Bidirectional & Single Unidirectional Voltage Range: Overvoltage protectors in TISP6NTP2A: 0 to -90V 2-pin surface mount TISP6NTP2B: 0 to -120V • SMB (DO-214AA) package 20A 10/1000 Surge performance over full operating temperature range • • 3 Ensures standards compliance C The 0V TISP6NTP2x Applications include PABX, Wireless rated for FCC Part 68 surges and in the local loop, Fiber in the loop, UL1950 / UL60950 power cross TISP4360H3BJ Dedicated ADSL Modem and lines are exposed ADSL Splitter protection, rated has four thyristor, diode and transistor structures to provide independent four wire protection. This level of integration allows the saving of to comply with FCC Part 68 PCB real estate with only one protector required between lines. This becomes a real benefit with say, 8 or 16 lines when you are saving up to eight devices per system or board. TISP6NTP2x 4 Single Bidirectional Overvoltage protectors in TIP 2 through-hole DO-92 This type of protector is essential when protecting modern SLICs which specify overvoltages in relation to the battery TISP3xxxH3SL SLIC 2 RING 2 75 95 500 100 * TISP7125H3SL 100 125 500 100 * TISP7135H3SL 110 135 500 100 * TISP7145H3SL 120 145 500 100 * TISP7165H3SL 130 165 500 100 P1553AB, P1553AC TISP7180H3SL 145 180 500 100 P1553Ax, TLP140G-1 TISP7200H3SL 150 200 500 100 P1803AB, P1803AC TISP7210H3SL 160 210 500 100 P1803Ax TISP7220H3SL 170 220 500 100 P2103AB, P2103AC NEW TISP Telecom Overvoltage Protection Products Extend Circuit Protection Range TISP4xxxL3BJ applications where short loop POTS VBAT1 ® Cost effective Modem protectors (modified TO-92) package voltage (VBAT). Only a programmable protector reference to the battery supply can limit the negative voltages to within a few volts of VBAT. 5 TISP3xxxH3SL & TISP7xxxH3SL We invite you to request your free datasheet and sample with the pre-paid card enclosed. Dual and triple 2 x 100A 10/1000 VBAT2 C TISP7xxxH3SL overvoltage protectors in TO-220 0V Device TISP6NTP2A TISP6NTP2B Voltage Rating -90V -120V compatible Single In Line package 6 TISP7095H3SL TISP6NTP2 Quad-programmable overvoltage protection for 2 SLICs with TISP7250H3SL 200 250 500 100 P2103Ax, P2353Ax, TLP200G-1 TISP7290H3SL 230 290 500 100 P2703Ax, TLP200G-1 TISP7350H3SL 275 350 500 100 P3203Ax TISP7400H3SL 300 400 500 100 P3403Ax, TLP270G-1 * Only Bourns offers these voltage variants. bourns.com • toll free (877) 4-BOURNS • Pairgain, Routers and many more voltages. TISP3xxxH3SL and TISP7xxxH3SL Product Ranges Device Number Number within a building, we have released a single device which can protect two telephone lines with different batter y We invite you to request your free datasheet and sample with the pre-paid card enclosed. parts (see table) With the increase of cable modems and more POTS (Plain Old Telephone Service) lines for use TIP 1 same. Both designs allow the simultaneous conduction of lightning or power line surges from the Tip and Ring terminals to Ground, as required by ITU-T K.20/21 and GR-1089-CORE. Functional replacements for Features Pairgain systems regenerating two or devices offer a full range of protection voltages, and are 2 x 100A 10/1000 versions of our popular 35A 10/1000 TISP3xxxF3SL and TISP7xxxF3SL. voltage matching • SLIC PROTECTOR overvoltage protectors. They are intended to protect exposed telecom applications where a fuse is fitted but little or no additional series resistance can be used, and requirements such as FCC simultaneously to T & R • TISP6NTP2x Protecting 2 SLICs Telecom Overvoltage Protectors TISP® battery voltages down to -105 V Bourns Sales Offices/Technical Assistance 5 bourns.com • toll free (877) 4-BOURNS Region Phone Fax The Americas +1 - 909 781-5500 +1 - 909 781-5700 Telecom Overvoltage Protectors TISP® 6 bourns.com • toll free (877) 4-BOURNS Telecom Overvoltage Protectors TISP® Overvoltage Protectors in Surface Mount SMB (DO-214AA) Packages TISP4360H3BJ - Dedicated Overvoltage Protection for ADSL Modems & Splitters Features These surface mount TISP® (Thyristor Integrated Surge Protector) devices protect telecom equipment from transients introduced to the line by lightning and power line induction. Each device is specified and characterized to enable equipment to meet and exceed equipment standards and recommendations, including ITU-T K.20/21/45, FCC Part 68, UL1950 / UL60950 and Telcordia (Bellcore) GR-1089-CORE. The small size of the SMB (DO-214AA) package minimizes PCB footprint and provides an economical Normal System Voltage Levels TISP4xxxxxBJ • ±15V ADSL signal shown as yellow band High Surge Current ratings for ITU-T K.20/K.21/K.45, FCC Part 68, UL1950 / UL60950 and GR1089 • -230 Applications include xDSL, NT, -240 Modem, Fax and Linecards -250 protection solution. -260 • Functional replacements for -270 TISP4xxxxxBJ - Single Bidirectional PxxxxSA, PxxxxSB, PxxxSC, The single bidirectional TISP4xxxxxBJ family provides one of the SMTPA, SMTPB, SMP100 most flexible protection solutions. The device can be used singly for applications where there is no ground connection, in pairs to provide ground reference protection, or three can be connected in delta or star configuration to provide three way protection for critical applications. This flexibility allows the device to protect a wide range of applications from modem, fax and telephone subscriber equipment to ISDN, NT and analog and digital line cards. options from 70V to 400V and two holding current options to ensure an accurate match with the application requirements. -280 -290 • High Surge Current ratings for -320 ITU-T K.20/K.21/K.45, FCC Part 68, -330 UL1950 /UL60950 and GR1089 -340 Applications include SLIC Linecards -360 -370 • -360 V PROTECTION VOLTAGE V(BO) protection voltage of the TISP4350L3BJ allows it to protect a modem hook switch and comply with the FCC Part 68 Type B ringer voltage. The TISP4070L3BJ’s 58V working voltage provides additional 100A Holding Current +I 150mA resistance to 37.5A 9/720 requirements Hence the 150mA -V +V 225mA +I 100A 150mA -V The TISP4xxx3LM devices feature 50A, 100A and 200A 9/720 surge ratings with up to 17 different operating voltages from 58V to 300V. This provides a flexible protection solution for 2-wire telecom equipment such as telephones, fax machines and modems. The devices are comprehensively specified for a full range of international requirements including ITU-T K.20, K.21, K.45 and FCC Part 68, UL1950 / UL60950. In addition, the devices are guaranteed for real world conditions with protection voltages guaranteed under lightning surge conditions. Both the TISP4xxxM3LM and TISP4xxxH3LM have surge ratings (ITSP) guaranteed over an ambient temperature range of -40°C to 85°C. The TISP4xxx3LM series provides a through-hole compliment to our existing range of single bidirectional surfacemount overvoltage protectors in SMB (DO-214AA) packages, ensuring that we have the protection solution to meet your requirement. • We invite you to request your free datasheet and sample with the pre-paid card enclosed. +V • 9/720 µs Surge Rating Optimized for cost-sensitive • Through-Hole Packages Surface-Mount Packages Also Available Protects against FCC Part 68 Type A and B surges and UL / CSA 50A power cross • Inherent low capacitance for high data rate digital applications • 100A Extensive applications information for UL / CSA compliance included in the datasheet 200A and 25 pF for the TISP4350L3BJ) make them ideal for high data rate digital applications. -I Telecom Overvoltage Protectors TISP® Ideal for modem hook switch and electronics protection customer premise equipment. In addition, the inherent low capacitance of these devices (39 pF @ 5V bias for the TISP4070L3BJ Holding Current bourns.com • toll free (877) 4-BOURNS comply with the lightning surge of FCC Part 68. TISP4xxxL3BJ can provide optimum protection for cost-sensitive Protection Voltage -70V to -150V with 4 variants latest range of overvoltage protectors are designed for use in 2-wire telecom applications. applications These devices feature a 40A 9/720 surge rating, requiring no additional series Characteristics -I TISP5xxxH3BJ Supplied in the space saving through-hole DO-92 (modified TO-92) packages, our TISP4350L3BJ and TISP4070L3BJ protection for the modem electronics. Holding Current 165V to 360V with 6 variants Telephones, Surge Bars analog modem protector, disrupting normal system operation. The TISP4360H3BJ’s 290V working voltage is designed to comfortably exceed the permitted 284V, allowing the system to operate normally. equipment such as modems against FCC Part 68 Type A and B surges and UL1950 / UL60950 Clause 6 power cross. The 350V Applications include Modems, ADSL Modems, Fax Machines, UL1950 / UL60950 and GR1089 The TISP4350L3BJ and TISP4070L3BJ are designed to protect Protection Voltage TISP4xxxH4BJ • Features We invite you to request your free datasheet and sample with the pre-paid card enclosed. 100A High Surge Current ratings for ITU-T K.20/K.21/K.45, FCC Part 68, modem protector would have a 275V working voltage to ensure that it Specified for FCC Part 68, UL1950 / UL60950 Cost-Effective Modem Protection Specified for FCC Part 68 Surges and UL/CSA Power Cross waveforms are guaranteed over an extended temperature range. Under a.c. conditions, 60A is guaranteed for 16.7 ms, allowing the reduction of series resistance required. 70V to 400V with 18 variants • • line cross specification paid card enclosed. Both the diode and crowbar sections are rated for 100A 10/1000, and 200A 9/720. Nine international surge TISP4xxxH3BJ A UL1950 / UL60950 - Detailed power AC, P0901AA, AB, AC, P1101AA, The TISP5xxxH3BJ is available in four voltage variants, ideal for SLIC linecard and xDSL applications. Rated for all ITU-T K.20, K.21 and K.45 surges and a.c. requirements We invite you to request your free datasheet and sample with the pre- into a low impedance on-state. The device will automatically reset to the high impedance off-state as the transient subsides. The diode section limits overvoltages to one diode drop under impulse and a.c. conditions. 50A • Specified to allow compliance with P0641AA, AB, AC, P0721AA, AB, overvoltage by breakdown clamping until the current rises to the breakover level causing the device to crowbar 70V to 400V with 18 variants Matched to POTS + ADSL Voltages • analog Available in 50A, 100A, 200A 9/720 surge ratings • Functional replacements for The single unidirectional TISP5xxxH3BJ consists of a voltage triggered unidirectional thyristor with an anti-parallel diode. The thyristor section operates by initially clipping the TISP4xxxM3BJ TISP4360H3BJ power lines, while minimizing disruption to normal system operation. conventional Features • applications have a ±15V ADSL signal superimposed on the analog ringing signal. This -284V peak would be clipped by a conventional -350 and xDSL protection modems and ADSL splitters from transients induced by lightning and Features would not clip the 269V peak ringing voltage (FCC Part 68 Clause b. 312). ADSL modem and ADSL splitter TISP4360H3BJ AB, AC, SMTHDT58, 80, 120 10/1000 µs Surge Rating WORKING VOLTAGE VDRM -310 TISP5xxxH3BJ - Single Unidirectional Protection Voltage -290 V -300 TISP5xxxH3BJ • The range is available with two lightning surge ratings 50A 10/1000 (100A 9/720) and 100A 10/1000 (200A 9/720), 18 protection voltage Device -284 V PEAK ADSL + RINGING The TISP4360H3BJ is designed to protect ADSL TISP4xxxx3LM Single Bidirectional Through-Hole Surge Protectors 2 bourns.com • toll free (877) 4-BOURNS Telecom Overvoltage Protectors TISP® 3 bourns.com • toll free (877) 4-BOURNS Telecom Overvoltage Protectors TISP® 4