PANASONIC MA10100

Switching Diodes
MA3X100 (MA10100)
Silicon epitaxial planar type
Unit: mm
For switching circuits
0.3+0.1
–0
0.15+0.1
–0.05
3
5˚
• High breakdown voltage: VR = 200 V
• Small terminal capacitance
1
2
(0.65) (0.65)
Rating
Unit
VR
200
V
Repetitive peak reverse voltage
VRRM
250
V
Average forward current
IF(AV)
100
mA
Repetitive peak forward current
IFRM
225
mA
Non-repetitive peak forwardsurge-current *
IFSM
500
mA
Junction temperature
Tj
150
°C
Storage temperature
Tstg
−55 to +150
°C
5˚
1: Anode
2: N.C.
3: Cathode
(0.15)
Symbol
0 to 0.1
Reverse voltage (DC)
0.9±0.1
1.3±0.1
2.0±0.2
■ Absolute Maximum Ratings Ta = 25°C
Parameter
(0.425)
1.25±0.1
2.1±0.1
■ Features
SMini3-F1 Package
Marking Symbol: M3A
Internal Connection
Note) *: t = 1 s
3
1
2
■ Electrical Characteristics Ta = 25°C ± 3°C
Parameter
Symbol
Conditions
Min
Typ
Max
Unit
Reverse current (DC)
IR
VR = 200 V
1.0
µA
Forward voltage (DC)
VF
IF = 100 mA
1.2
V
Terminal capacitance
Ct
VR = 0 V, f = 1 MHz
3.0
pF
Reverse recovery time *
trr
IF = IR = 10 mA
Irr = 1 mA , RL = 100 Ω
60
ns
Note) 1. Rated input/output frequency: 20 MHz
2. *: trr measuring instrument
Bias Application Unit N-50BU
Input Pulse
tp
tr
10%
A
VR
Pulse Generator
(PG-10N)
Rs = 50 Ω
90%
tp = 2 µs
tr = 0.35 ns
δ = 0.05
Wave Form Analyzer
(SAS-8130)
Ri = 50 Ω
Output Pulse
t
IF
trr
t
Irr = 1 mA
IF = IR = 10 mA
RL = 100 Ω
Note) The part number in the parenthesis shows conventional part number.
Publication date: July 2002
SKF00063AED
1
MA3X100
IF  V F
I R  VR
25°C
100°C
1
−20°C
10−2
10
100°C
1
10−1
25°C
10−2
1.5
1.0
0.5
10−3
0
0.2
0.4
0.6
0.8
1.0
Forward voltage VF (V)
2
Terminal capacitance Ct (pF)
Reverse current IR (nA)
Forward current IF (mA)
Ta = 150°C
10
10−1
2.0
102
Ta = 150°C
102
10−3
Ct  VR
103
103
1.2
10−4
0
50
100
150
200
Reverse voltage VR (V)
SKF00063AED
250
0
0
50
100
150
Reverse voltage VR (V)
200
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government
if any of the products or technologies described in this material and controlled under the "Foreign
Exchange and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license.
(3) We are not liable for the infringement of rights owned by a third party arising out of the use of the
product or technologies as described in this material.
(4) The products described in this material are intended to be used for standard applications or general
electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,
combustion equipment, life support systems and safety devices) in which exceptional quality and
reliability are required, or if the failure or malfunction of the products may directly jeopardize life or
harm the human body.
• Any applications other than the standard applications intended.
(5) The products and product specifications described in this material are subject to change without
notice for modification and/or improvement. At the final stage of your design, purchasing, or use of
the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that
the latest specifications satisfy your requirements.
(6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of
incidence of break down and failure mode, possible to occur to semiconductor products. Measures
on the systems such as redundant design, arresting the spread of fire or preventing glitch are
recommended in order to prevent physical injury, fire, social damages, for example, by using the
products.
(7) When using products for which damp-proof packing is required, observe the conditions (including
shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets
are individually exchanged.
(8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written
permission of Matsushita Electric Industrial Co., Ltd.
2002 JUL