Plastic Packages for Integrated Circuits Package Outline Drawing L8.1.6x1.6 8 LEAD QUAD FLAT NO-LEAD PLASTIC PACKAGE Rev 0, 7/14 PIN# 1 INDEX AREA 6 1.60 A 0.12x45° 8x 0.40 PIN# 1 B INDEX AREA 8 6 1 7 1.60 4x 0.40 5 4X 3 0.05 C 4 4 TOP VIEW 8x 0.20 0.07 M C A B 0.05 M C BOTTOM VIEW SEE DETAIL "X" (8x 0.20) 0.10 C 0.127 REF C 0.50 SEATING PLANE (4x 0.40) 0.08 C (1.40x TYP) SIDE VIEW 0.02 5 (8x 0.60) C 0.2 REF TYPICAL RECOMMENDED LAND PATTERN 0-0.05 DETAIL "X" NOTES: 1. Dimensions are in millimeters. Dimensions in ( ) for Reference Only. 2. Dimensioning and tolerancing conform to ASME Y14.5M-1994. 3. Unless otherwise specified, tolerance : Decimal ± 0.05 4. Lead width Dimension applies to the metallized terminal and is measured between 0.15mm and 0.30mm from the terminal tip. 5. Tiebar shown (if present) is a non-functional feature. 6. The configuration of the pin #1 identifier is optional, but must be located within the zone indicated. The pin #1 identifier may be either a mold or mark feature. 1